☆ 4.6 Article

High-performance medical-grade resin radically reinforced with cellulose nanofibers for 3D printing

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Manufacturing

Investigations on fiber-matrix properties of heat-treated and UV-treated regenerated cellulose fibers

Christian Kahl et al.

Summary: The mechanical properties of fiber-reinforced compounds are influenced by factors such as fiber orientation, length, type, and bonding to the polymer. Adhesion between fibers and polymers can be increased through treatment, but excessive thermal and UV treatment can degrade the fiber structure and reduce the reinforcing effect.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

Add to Collection

Article Engineering, Manufacturing

Advanced functional materials based on bamboo cellulose fibers with different crystal structures

Qiuqin Lin et al.

Summary: This study demonstrates two types of bamboo-fiber-based functional materials, one for structural materials with outstanding anti-mildew properties and the other for electrodes in wearable devices. The design strategies of these materials provide new insights for the development of novel degradable and sustainable functional materials.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

Add to Collection

Article Engineering, Multidisciplinary

Investigation of the Biocidal Performance of Multi-Functional Resin/Copper Nanocomposites with Superior Mechanical Response in SLA 3D Printing

Nectarios Vidakis et al.

Summary: Metals like silver, gold, and copper have biocidal properties similar to the host defense peptides of the immune system. This study focuses on using copper nanoparticles as fillers in UV-cured resin to induce biocidal properties in the material. The nanocomposites show enhanced mechanical responses compared to the neat material, and the antibacterial performance is sufficient for medical applications.

BIOMIMETICS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Pharmaceutical and biomedical applications of cellulose nanofibers: a review

Abhishek Pandey

Summary: Cellulose nanofibers, derived from sustainable resources, have various pharmaceutical applications such as controlled drug delivery, wound dressing, and anticancer drug delivery, with high biocompatibility and drug release efficiency.

ENVIRONMENTAL CHEMISTRY LETTERS (2021)

Add to Collection

Article Polymer Science

Additive manufacturing of PA12 carbon nanotube composites with a novel laser polymer deposition process

Yannick L. Wencke et al.

Summary: The facile manufacture of PA12 MWCNT/silica nanocomposite powders through a high energy mixing process enables the generation of 3D objects using Laser Polymer Deposition. The built parts exhibit mechanical properties comparable to 10%-20% of the bulk material, with main mechanical failure mechanisms identified as partially unmolten particles and voids. The mechanical properties are improved with low additive content, and electronic conductivity can be achieved through the formation of a MWCNT network.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Add to Collection

Article Engineering, Manufacturing

Polyamide 6 composites reinforced with nanofibrillated cellulose formed during compounding: Effect of acetyl group degree of substitution

Takeshi Semba et al.

Summary: By acetylating soft wood kraft pulps and melt compounding with PA6, the reinforcement effect of nanofibrillated cellulose can be enhanced, forming a network structure in the PA6 matrix and significantly improving the mechanical and thermal properties of the material.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Add to Collection

Article Polymer Science

On the Mechanical Response of Silicon Dioxide Nanofiller Concentration on Fused Filament Fabrication 3D Printed Isotactic Polypropylene Nanocomposites

Nectarios Vidakis et al.

Summary: This study investigated the effect of nanofiller loading on the mechanical and viscoelastic properties of PP/SiO2 nanocomposites for FFF 3D printing. Results showed an enhancement in mechanical performance within a certain range of silica loading, but exceeding a certain threshold revealed processing challenges.

POLYMERS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Wood-reinforced composites by stereolithography with the stress whitening behavior

Shuyang Zhang et al.

Summary: In this study, poplar wood flour at different concentrations was incorporated into a methacrylate-based resin via solution blending to fabricate wood-reinforced composites using SLA 3D printing. The addition of wood flour improved the tensile strength and Young's modulus of the printed composites, while causing stress whitening during uniaxial drawing. This research demonstrates the potential of using wood flour in SLA 3D printed WPC to reinforce products with a modest loading amount.

MATERIALS & DESIGN (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical Performance of Fused Filament Fabricated and 3D-Printed Polycarbonate Polymer and Polycarbonate/Cellulose Nanofiber Nanocomposites

Nectarios Vidakis et al.

Summary: Nanocomposites were fabricated with PC as the matrix material and CNF as the filler at low loadings. Optimum 3D-printing parameters were experimentally determined, showing that adding 0.5 wt.% filler provided the best performance compared to other materials tested. Mechanical tests and SEM imaging were conducted to analyze the specimens' morphology and fracture mechanism.

FIBERS (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

The effect of strain rate and temperature on the mechanical properties of polycarbonate composites

Tamas Krausz et al.

Summary: Polycarbonate thermoplastic materials are widely used in automotive interior products due to their visual aspects and good mechanical properties. The study shows that increasing loading rate slightly increases elastic modulus and tensile strength, while higher temperatures significantly decrease tensile strength.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Article Engineering, Manufacturing

Tailoring properties of photopolymers for additive manufacturing with mixture design

Janez Slapnik et al.

Summary: This study demonstrates the application of experimental design principles in developing photocurable resins with adjustable mechanical and thermal properties for additive manufacturing. By performing multi-objective optimization, it is possible to conveniently tailor the properties of photocurable resins.

PROGRESS IN ADDITIVE MANUFACTURING (2021)

Add to Collection

Review Materials Science, Composites

The use of cellulose in bio-derived formulations for 3D/4D printing: A review

Christian Gauss et al.

Summary: Cellulose, a versatile biopolymer, is now extensively used in biocomposites and 3D printing technologies. The focus is on developing new cellulose-based composites, meeting the requirements for 3D/4D printing, and understanding the interplay between rheology, chemistry, and processing. Promising results have been shown for real-life applications, opening new opportunities for scientific development and sustainable materials.

COMPOSITES PART C: OPEN ACCESS (2021)

Add to Collection

Article Materials Science, Composites

Mechanical properties of mechanically-defibrated cellulose nanofiber reinforced epoxy resin matrix composites

Hiroki Kurita et al.

Summary: Cellulose nanofibers (CNF) have been studied as reinforcement in composite materials, with mechanical defibration method considered cost-effective and practical for achieving the desired properties in polymer matrices.

JOURNAL OF COMPOSITE MATERIALS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Process-Structure-Properties in Polymer Additive Manufacturing via Material Extrusion: A Review

G. D. Goh et al.

CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2020)

Add to Collection

Article Automation & Control Systems

Influence of manufacturing parameters on the mechanical properties of projection stereolithography-manufactured specimens

D. Ambrosio et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Applied

Antibacterial properties of a bacterial cellulose CQD-TiO2 nanocomposite

Samira Malmir et al.

CARBOHYDRATE POLYMERS (2020)

Add to Collection

Article Automation & Control Systems

Study of the manufacturing process effects of fused filament fabrication and injection molding on tensile properties of composite PLA-wood parts

M. Damous Zandi et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

Add to Collection

Review Polymer Science

Production of Sustainable and Biodegradable Polymers from Agricultural Waste

Chrysanthos Maraveas

POLYMERS (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Sustainable Additive Manufacturing: Mechanical Response of Acrylonitrile-Butadiene-Styrene over Multiple Recycling Processes

Nectarios Vidakis et al.

SUSTAINABILITY (2020)

Add to Collection

Article Engineering, Manufacturing

Effect of shear forces on dispersion-related properties of microcrystalline cellulose-reinforced EVOH composites for advanced applications

Georg Graninger et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Add to Collection

Article Polymer Science

On the Strain Rate Sensitivity of Fused Filament Fabrication (FFF) Processed PLA, ABS, PETG, PA6, and PP Thermoplastic Polymers

Nectarios Vidakis et al.

POLYMERS (2020)

Add to Collection

Review Biotechnology & Applied Microbiology

Latest Advances on Bacterial Cellulose-Based Antibacterial Materials as Wound Dressings

Lu Zheng et al.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2020)

Add to Collection

Review Engineering, Industrial

Metal additive manufacturing in the commercial aviation industry: A review

Annamaria Gisario et al.

JOURNAL OF MANUFACTURING SYSTEMS (2019)

Add to Collection

Article Chemistry, Physical

Antibacterial Activity and Biodegradation of Cellulose Fiber Blends with Incorporated ZnO

Domen Malis et al.

MATERIALS (2019)

Add to Collection

Article Engineering, Manufacturing

Mechanical reinforcement and thermal properties of PVA tricomponent nanocomposites with chitin nanofibers and cellulose nanocrystals

Cameron W. Irvin et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

Add to Collection

Article Engineering, Geological

Identification of a Suitable 3D Printing Material for Mimicking Brittle and Hard Rocks and Its Brittleness Enhancements

T. Zhou et al.

ROCK MECHANICS AND ROCK ENGINEERING (2018)

Add to Collection

Article Engineering, Manufacturing

Pelletized cellulose fibres used in twin-screw extrusion for biocomposite manufacturing: Fibre breakage and dispersion

Maiju Hietala et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

Add to Collection

Review Engineering, Multidisciplinary

Additive manufacturing (3D printing): A review of materials, methods, applications and challenges

Tuan D. Ngo et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Biobased Acrylate Photocurable Resin Formulation for Stereolithography 3D Printing

Vincent S. D. Voet et al.

ACS OMEGA (2018)

Add to Collection

Article Biochemistry & Molecular Biology

Thermal and dynamic mechanical properties of cellulose nanofibers reinforced epoxy composites

N. Saba et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2017)

Add to Collection

Article Biochemistry & Molecular Biology

Mechanical, morphological and structural properties of cellulose nanofibers reinforced epoxy composites

N. Saba et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Silver-Functionalized Bacterial Cellulose as Antibacterial Membrane for Wound-Healing Applications

Sudipto Pal et al.

ACS OMEGA (2017)

Add to Collection

Proceedings Paper Automation & Control Systems

The role of additive manufacturing in the era of Industry 4.0

Ugur M. Dilberoglu et al.

27TH INTERNATIONAL CONFERENCE ON FLEXIBLE AUTOMATION AND INTELLIGENT MANUFACTURING, FAIM2017 (2017)

Add to Collection

Article Engineering, Multidisciplinary

Mechanical characterization of scalable cellulose nano-fiber based composites made using liquid composite molding process

Bamdad Barari et al.

COMPOSITES PART B-ENGINEERING (2016)

Add to Collection

Editorial Material Materials Science, Multidisciplinary

Additive manufacturing

H. K. D. H. Bhadeshia

MATERIALS SCIENCE AND TECHNOLOGY (2016)

Add to Collection

Article Materials Science, Composites

Nanostructured biocomposites based on unsaturated polyester resin and a cellulose nanofiber network

Farhan Ansari et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2015)

Add to Collection

Article Materials Science, Biomaterials

Antibacterial and photochemical properties of cellulose nanofiber-titania nanocomposites loaded with two different types of antibiotic medicines

O. L. Galkina et al.

JOURNAL OF MATERIALS CHEMISTRY B (2015)

Add to Collection

Article Chemistry, Applied

Enhanced thermal and mechanical properties of PVA composites formed with filamentous nanocellulose fibrils

Wei Li et al.

CARBOHYDRATE POLYMERS (2014)

Add to Collection

Article Economics

A global sustainability perspective on 3D printing technologies

Malte Gebler et al.

ENERGY POLICY (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Cellulose nanocrystals as organic nanofillers for transparent polycarbonate films

Weinan Xu et al.

JOURNAL OF NANOPARTICLE RESEARCH (2013)

Add to Collection

Proceedings Paper Engineering, Industrial

Research on Application of SLA technology in the 3D printing technology

Xueliang Ma

FRONTIERS OF MANUFACTURING SCIENCE AND MEASURING TECHNOLOGY III, PTS 1-3 (2013)

Add to Collection

Article Engineering, Manufacturing

Mechanical and thermal properties of PLA composites with cellulose nanofibers and standard size fibers

M. Kowalczyk et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)

Add to Collection

Article Chemistry, Multidisciplinary

Antimicrobial silver nanoparticles generated on cellulose nanocrystals

Nicolas Drogat et al.

JOURNAL OF NANOPARTICLE RESEARCH (2011)

Add to Collection

Article Chemistry, Applied

Impregnation of silver nanoparticles into bacterial cellulose for antimicrobial wound dressing

Thawatchai Maneerung et al.

CARBOHYDRATE POLYMERS (2008)

Add to Collection

Article Materials Science, Ceramics

Sol-gel coating of cellulose fibres with antimicrobial and repellent properties

Brigita Tomsic et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2008)

Add to Collection

Article Chemistry, Applied

Antimicrobial cellulose acetate nanofibers containing silver nanoparticles

Won Keun Son et al.

CARBOHYDRATE POLYMERS (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.