4.7 Article

Rapid microwave sintering of centimetric zirconia: Scalability and electromagnetic-thermal-fluid-dynamic simulation

Related references

Note: Only part of the references are listed.
Article Materials Science, Multidisciplinary

Estimate microstructure development from sintering shrinkage: A kinetic field approach

Charles Maniere et al.

Summary: A new method is proposed in this study, which allows for the step-by-step identification of all the required sintering parameters using the MSC method. It can accurately predict the sintering behavior and is compatible with finite element simulation.

MATERIALS TODAY COMMUNICATIONS (2022)

Article Materials Science, Ceramics

Experimental and numerical thermal analysis for direct microwave heating of silicon carbide

Ines Ghorbel et al.

Summary: The comparison between experiment and numerical simulation of microwave heating of a parallelepipedic silicon carbide (SiC) sample shows that the heating of SiC depends only on the electric field, with good agreement found between experimental and numerical results. The effect of sample orientations and the cavity length on heating is also highlighted and analyzed.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2021)

Article Materials Science, Multidisciplinary

Promoting microstructural homogeneity during flash sintering of ceramics through thermal management

Gareth M. Jones et al.

Summary: Flash sintering is a promising novel ceramic sintering technology that offers potential benefits in reducing firing time and furnace temperature, but challenges remain in scaling up to industrial manufacturing levels due to difficulties in managing heat generation and microstructural homogeneity.

MRS BULLETIN (2021)

Article Materials Science, Ceramics

Is direct microwave heating well suited for sintering ceramics?

Tristan Garnault et al.

Summary: This paper presents a thorough analysis of direct microwave heating for sintering ceramic materials. Experimental and numerical studies showed that direct microwave heating is not suitable for reliable and homogeneous sintering of classical ceramics, which explains why susceptor-assisted heating is preferred in most cases.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Ceramics

Flash microwave pressing of zirconia

Charles Maniere et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)

Article Engineering, Manufacturing

Impact of convection and radiation on direct/hybrid heating stability of field assisted sintering

Charles Maniere et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

Article Materials Science, Ceramics

Dental ceramic prostheses by stereolithography-based additive manufacturing: potentials and challenges

Hezhen Li et al.

ADVANCES IN APPLIED CERAMICS (2019)

Review Materials Science, Ceramics

Flash sintering of ceramics

Mattia Biesuz et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Article Nanoscience & Nanotechnology

Thermally-insulated flash sintering

Mattia Biesuz et al.

SCRIPTA MATERIALIA (2019)

Article Materials Science, Multidisciplinary

Ultra-rapid microwave sintering employing thermal instability and resonant absorption

Kirill Rybakov et al.

JOURNAL OF MATERIALS RESEARCH (2019)

Article Engineering, Multidisciplinary

Electromagnetic heating control via high-frequencyresonance of a triple-layer laminate

J. M. Gaone et al.

JOURNAL OF ENGINEERING MATHEMATICS (2019)

Article Materials Science, Multidisciplinary

Microwave flash sintering of metal powders: From experimental evidence to multiphysics simulation

Charles Maniere et al.

ACTA MATERIALIA (2018)

Article Physics, Applied

Flash Sintering of Oxide Ceramics under Microwave Heating

Yu. V. Bykov et al.

TECHNICAL PHYSICS (2018)

Article Materials Science, Multidisciplinary

Tuning, Impedance Matching, and Temperature Regulation during High-Temperature Microwave Sintering of Ceramics

Sylvain Marinel et al.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2018)

Article Materials Science, Ceramics

Sintering paths and mechanisms of pure MgAl2O4 conventionally and microwave sintered

Rodolphe Macaigne et al.

CERAMICS INTERNATIONAL (2018)

Review Materials Science, Ceramics

Review of flash sintering: materials, mechanisms and modelling

Min Yu et al.

ADVANCES IN APPLIED CERAMICS (2017)

Article Materials Science, Ceramics

Current understanding and future research directions at the onset of the next century of sintering science and technology

Rajendra K. Bordia et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)

Article Materials Science, Ceramics

Fully coupled electromagnetic-thermal-mechanical comparative simulation of direct vs hybrid microwave sintering of 3Y-ZrO2

Charles Maniere et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)

Article Materials Science, Ceramics

Ultra-fast firing: Effect of heating rate on sintering of 3YSZ, with and without an electric field

W. Ji et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)

Article Nanoscience & Nanotechnology

Inherent heating instability of direct microwave sintering process: Sample analysis for porous 3Y-ZrO2

Charles Maniere et al.

SCRIPTA MATERIALIA (2017)

Article Materials Science, Multidisciplinary

Direct microwave sintering of pure alumina in a single mode cavity: Grain size and phase transformation effects

Jeremy Croquesel et al.

ACTA MATERIALIA (2016)

Article Chemistry, Physical

On the Mechanism of Microwave Flash Sintering of Ceramics

Yury V. Bykov et al.

MATERIALS (2016)

Review Materials Science, Multidisciplinary

Flash sintering of ceramic materials

C. E. J. Dancer

MATERIALS RESEARCH EXPRESS (2016)

Article Mathematical & Computational Biology

A Mathematical Model for Flash Sintering

I. J. Hewitt et al.

MATHEMATICAL MODELLING OF NATURAL PHENOMENA (2015)

Article Materials Science, Ceramics

Flash Microwave Sintering of Transparent Yb:(LaY)2O3 Ceramics

Yury V. Bykov et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2015)

Article Materials Science, Ceramics

Effects of the Susceptor Dielectric Properties on the Microwave Sintering of Alumina

Romain Heuguet et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2013)

Review Materials Science, Ceramics

Microwave Sintering: Fundamentals and Modeling

Kirill I. Rybakov et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2013)

Article Materials Science, Multidisciplinary

Ponderomotive effects during contact formation in microwave sintering

Eugene A. Olevsky et al.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2013)

Article Nanoscience & Nanotechnology

Non-thermal effect on densification kinetics during microwave sintering of α-alumina

F. Zuo et al.

SCRIPTA MATERIALIA (2013)

Article Thermodynamics

Immersed volume method for solving natural convection, conduction and radiation of a hat-shaped disk inside a 3D enclosure

E. Hachem et al.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2012)

Article Materials Science, Ceramics

Effects of local Joule heating during the field assisted sintering of ionic ceramics

Troy B. Holland et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)

Article Nanoscience & Nanotechnology

The microwave ponderomotive effect on ceramic sintering

K. I. Rybakov et al.

SCRIPTA MATERIALIA (2012)

Article Materials Science, Ceramics

Influence of Residual Monomer on Cracking in Ceramics Fabricated by Stereolithography

Chang-Jun Bae et al.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2011)

Article Materials Science, Ceramics

Modeling of the temperature distribution of flash sintered zirconia

Salvatore Grasso et al.

JOURNAL OF THE CERAMIC SOCIETY OF JAPAN (2011)

Article Engineering, Electrical & Electronic

Regularized Maxwell Equations and Nodal Finite Elements for Electromagnetic Field Computations

Ruben Otin

ELECTROMAGNETICS (2010)

Review Chemistry, Physical

Microwave versus conventional sintering: A review of fundamentals, advantages and applications

Morteza Oghbaei et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2010)

Article Materials Science, Ceramics

Flash Sintering of Nanograin Zirconia in <5 s at 850°C

Marco Cologna et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2010)

Review Physics, Applied

Consolidation enhancement in spark-plasma sintering: Impact of high heating rates

Eugene A. Olevsky et al.

JOURNAL OF APPLIED PHYSICS (2007)

Article Materials Science, Multidisciplinary

Role of convective heat removal and electromagnetic field structure in the microwave heating of materials

S. V. Egorov et al.

JOURNAL OF MATERIALS SCIENCE (2007)

Article Materials Science, Multidisciplinary

Microwave sintering of zirconia ceramics

DD Upadhyaya et al.

JOURNAL OF MATERIALS SCIENCE (2001)