Related references
Note: Only part of the references are listed.Preparation and application of nanofluid flooding based on polyoxyethylated graphene oxide nanosheets for enhanced oil recovery
Jie Cao et al.
CHEMICAL ENGINEERING SCIENCE (2022)
Experimental study of thermal management system for cylindrical Li-ion battery pack based on nanofluid cooling and copper sheath
Amirhosein Sarchami et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2022)
Synthesis, stability, density, viscosity of ethylene glycol-based ternary hybrid nanofluids: Experimental investigations and model -prediction using modern machine learning techniques
Zafar Said et al.
POWDER TECHNOLOGY (2022)
Multi-objective optimization of mini U-channel cold plate with SiO2 nanofluid by RSM and NSGA-II
Jing Li et al.
ENERGY (2022)
Optimized energy distribution management in the nanofluid-assisted photovoltaic/thermal system via exergy efficiency analysis
Boyu Li et al.
ENERGY (2022)
The development of novel nanofluid for enhanced oil recovery application
Reza Khoramian et al.
FUEL (2022)
Comparative performance analysis of internal combustion engine water jacket coolant using a mix of Al2O3 and CuO-based nanofluid and ethylene glycol
Luiz Otavio Ferrao Teixeira Alves et al.
ENERGY (2022)
Nanofluid preparation, stability and performance for CO2 absorption and desorption enhancement: A review
Atefeh Tavakoli et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2022)
Thermal conductivity performance in hybrid (SWCNTs-CuO/Ehylene glycol) nanofluid flow: Dual solutions
Muhammad Yasir et al.
AIN SHAMS ENGINEERING JOURNAL (2022)
Recent advances on nanofluids for low to medium temperature solar collectors: energy, exergy, economic analysis and environmental impact
Zafar Said et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2021)
A comparative experimental study on the physical behavior of mono and hybrid RBD palm olein based nanofluids using CuO nanoparticles and PANI nanofibers
A. G. N. Sofiah et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)
An experimental study on characterization and properties of nano lubricant containing Cellulose Nanocrystal (CNC)
N. W. Awang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
Thermophysical properties of polyalphaolefin oil modified with nanoadditives
Maria J. G. Guimarey et al.
JOURNAL OF CHEMICAL THERMODYNAMICS (2019)
Synthesis, characterization, stability and thermal conductivity of multi-walled carbon nanotubes (MWCNTs) and eco-friendly jatropha seed oil based nanofluid: An experimental investigation and modeling approach
Wajid Ur Rehman et al.
JOURNAL OF MOLECULAR LIQUIDS (2019)
Synthesis of stable waste palm oil based CuO nanofluid for heat transfer applications
Mohammed Javed et al.
HEAT AND MASS TRANSFER (2018)
Experimental studies on thermal and rheological behaviour of TiO2-PAG nanolubricant for refrigeration system
S. S. Sanukrishna et al.
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2018)
Surface modification and thermal performance of a graphene oxide/novolac epoxy composite
Shasha Li et al.
RSC ADVANCES (2018)
Investigation of tribological properties of CuO/palm oil nanolubricant using pin-on-disc tribotester
Nurul Farhanah Azman et al.
GREEN MATERIALS (2018)
Effect of copper oxide nanoparticles on thermophysical properties of hydraulic oil-based nanolubricants
Ankit Kotia et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2017)
Stability and thermal analysis of MWCNT-thermal oil-based nanofluids
Suhaib Umer Ilyas et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2017)
Effects of working temperature on thermo-physical properties and forced convection heat transfer of TiO2 nanofluids in water - Ethylene glycol mixture
W. H. Azmi et al.
APPLIED THERMAL ENGINEERING (2016)
Electrical conductivity, viscosity, and density of different nanofluids: An experimental study
Sina Nabati Shoghl et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2016)
Nanolubricants developed from tiny CuO nanoparticles
S. M. Alves et al.
TRIBOLOGY INTERNATIONAL (2016)
Roles of nanoparticles in oil lubrication
Wei Dai et al.
TRIBOLOGY INTERNATIONAL (2016)
Improving the tribological characteristics of piston ring assembly in automotive engines using Al2O3 and TiO2 nanomaterials as nano-lubricant additives
Mohamed Kamal Ahmed Ali et al.
TRIBOLOGY INTERNATIONAL (2016)
Optimization of a porous carbon nanofiber layer for the membrane electrode assembly in DMFC
A. M. Zainoodin et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Copper oxide nano-particles as friction-reduction and anti-wear additives in lubricating oil
Vijaykumar S. Jatti et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2015)
One dimensional well-aligned CdO nanocrystal by solvothermal method
K. Kaviyarasu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Pyrolysis of waste animal fats in a fixed-bed reactor: Production and characterization of bio-oil and bio-char
A. Ben Hassen-Trabelsi et al.
WASTE MANAGEMENT (2014)
Fourier Transform Infrared Spectroscopy (FTIR) and Multivariate Analysis for Identification of Different Vegetable Oils Used in Biodiesel Production
Daniela Mueller et al.
SENSORS (2013)
Experimental evaluation of engine oil properties containing copper oxide nanoparticles as a nanoadditive
Ehsan-O-Llah Ettefaghi et al.
INTERNATIONAL JOURNAL OF INDUSTRIAL CHEMISTRY (2013)
Temperature induced changes in ZnO-water nanofluid: Zeta potential, size distribution and viscosity profiles
K. S. Suganthi et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)
Experimental Evaluation on the Tribological Properties of Coconut Oil by the Addition of CuO Nanoparticles
Manu Varghese Thottackkad et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2012)
Viscosity and density of CuO nanolubricant
Mark A. Kedzierski
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2012)
Mechanisms proposed through experimental investigations on thermophysical properties and forced convective heat transfer characteristics of various nanofluids - A review
M. Chandrasekar et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2012)
Production of Biofuels from High-Acid-Value Waste Oils
Junming Xu et al.
ENERGY & FUELS (2011)
A critical synthesis of thermophysical characteristics of nanofluids
Khalil Khanafer et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2011)
Analysis of pork adulteration in beef meatball using Fourier transform infrared (FTIR) spectroscopy
A. Rohman et al.
MEAT SCIENCE (2011)
Viscosity of alumina nanoparticles dispersed in car engine coolant
Madhusree Kole et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2010)
Fourier transform infrared (FTIR) spectroscopy for analysis of extra virgin olive oil adulterated with palm oil
A. Rohman et al.
FOOD RESEARCH INTERNATIONAL (2010)
Fabrication of copper oxide multilayer nanosheets for supercapacitor application
D. P. Dubal et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Liquid hydrocarbon fuels obtained by the pyrolysis of soybean oils
Xu Junming et al.
BIORESOURCE TECHNOLOGY (2009)
Effect of catalyst additives on the production of biofuels from palm oil cracking in a transport riser reactor
Thiam Leng Chew et al.
BIORESOURCE TECHNOLOGY (2009)
New temperature dependent thermal conductivity data for water-based nanofluids
Honorine Angue Mintsa et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2009)
Response surface methodology (RSM) as a tool for optimization in analytical chemistry
Marcos Almeida Bezerra et al.
TALANTA (2008)
Thermal conductivity and particle agglomeration in alumina nanofluids: Experiment and theory
Elena V. Timofeeva et al.
PHYSICAL REVIEW E (2007)
Viscosity of copper oxide nanoparticles dispersed in ethylene glycol and water mixture
Praveen K. Namburu et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2007)
Fabrication of CuO pricky microspheres with tunable size by a simple solution route
YY Xu et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2005)
Infrared absorption spectra of Buriti (Mauritia flexuosa L.) oil
MLS Albuquerque et al.
VIBRATIONAL SPECTROSCOPY (2003)
Share Paper
