4.7 Article

Efficient removal of Cr(VI) from aqueous solutions by polypyrrole/natural pyrite composites

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

Synthesis of calcium-aluminum-layered double hydroxide and a polypyrrole decorated product for efficient removal of high concentrations of aqueous hexavalent chromium

Dan Yang et al.

Summary: CAL and CAL-PPy were prepared to efficiently remove high concentrations of Cr(VI) wastewater, with CAL-PPy showing improved adsorption performance due to increased specific surface area. The mechanisms involved electrostatic attraction, surface complexation, anion exchange, and reduction to low-toxicity Cr(III).

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Article Engineering, Environmental

Sustainable ecofriendly recruitment of bioethanol fermentation lignocellulosic spent waste biomass for the safe reuse and discharge of petroleum production produced water via biosorption and solid biofuel production

Hussein N. Nassar et al.

Summary: The study demonstrated that sustainable lignocellulosic spent waste rice straw (SWRS) has efficient pollutant removal ability for petroleum production produced water (PPPW) under various conditions, with a pseudo-second-order chemisorption process exhibiting spontaneous, favorable, and endothermic characteristics.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Article Chemistry, Physical

Highly effective agro-waste based functional green adsorbents for toxic chromium(VI) ion removal from wastewater

Mohammad Mahbub Kabir et al.

Summary: Two novel and economically competitive adsorbents, ATAB and GS-GO@FeNPs, were synthesized from waste-tea-leaves to remove chromium from contaminated water, showing great potential for reuse and outstanding adsorption capabilities. The adsorption process was well described by pseudo-second order kinetic model and Langmuir and Freundlich isotherm models, highlighting the effectiveness and feasibility of the adsorbents in remediation of Cr(VI) from aquatic environments.

JOURNAL OF MOLECULAR LIQUIDS (2022)

Article Materials Science, Multidisciplinary

Biocompatible polypyrrole/zeolite composite for chromate removal and detoxification

S. Senguttuvan et al.

Summary: This study evaluated the Cr(VI) removal efficiency, detoxification, and biocompatibility of polypyrrole/zeolite (PPy/Ze) nanocomposite. The results showed that the composite effectively removed Cr(VI) and detoxified it through a reduction process, while being non-toxic to environmental microorganisms.

MATERIALS LETTERS (2022)

Article Engineering, Environmental

Polypyrrole coated molybdenum disulfide composites as adsorbent for enhanced removal of Cr(VI) in aqueous solutions by adsorption combined with reduction

Li Xiang et al.

Summary: The study successfully fabricated PPy/MoS2 composites as efficient sorbents for Cr(VI) removal, showing superior adsorption capacity and cyclic stability. The sorption of Cr(VI) was significantly influenced by pH, with optimal removal efficiency achieved under acidic conditions; the adsorption process was mainly controlled by pseudo-second-order kinetics and Langmuir isotherm model; ion exchange, chemical reduction, and surface chelation played crucial roles in the elimination of Cr(VI).

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Environmental

Highly efficient removal of hexavalent chromium from aqueous solution by calcined Mg/Al-layered double hydroxides/polyaniline composites

Feng-Lan Long et al.

Summary: The study synthesized PANI/LDOs and investigated their performance in removing hexavalent chromium. The results showed that PANI/LDOs have great potential in Cr(VI) removal and can be a promising material for wastewater treatment.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Environmental Sciences

Natural pyrite improved steel slag towards environmentally sustainable chromium reclamation from hexavalent chromium-containing wastewater

Yaorong Shu et al.

Summary: This study proposed a green method for efficient removal of hexavalent chromium from aqueous solution using waste steel slag and natural pyrite. The method provides a feasible and environmentally sustainable solution for chromium reclamation.

CHEMOSPHERE (2021)

Article Chemistry, Physical

Polypyrrole coated 3D flower MoS2 composites with tunable impedance for excellent microwave absorption performance

Qian Su et al.

Summary: The MoS2@Ppy composites were synthesized through microwave-assisted hydrothermal method, with MoS2 nanoparticles exhibiting three-dimensional flower-like structures and Ppy nanoparticles uniformly coated on the surface of MoS2. The composites showed enhanced complex permittivity due to the high conductivity of Ppy, leading to strong microwave absorption performance and potential application as high-efficiency microwave absorbers.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Environmental Sciences

Efficient removal of selenate in water by cationic poly (allyltrimethylammonium) grafted chitosan and biochar composite

Lixun Zhang et al.

Summary: A new composite material composed of poly(allyltrimethylammonium) grafted chitosan and biochar was introduced for efficient removal of selenate from water, exhibiting rapid and high-capacity adsorption with a pseudo-second-order kinetics model. The material showed great potential for removing anionic heavy metal ions due to its high efficiency and versatile application in a wide pH range. The main mechanisms of selenate removal were attributed to electrostatic interactions and redox-complexation interactions with specific functional groups on the composite.

ENVIRONMENTAL RESEARCH (2021)

Article Engineering, Chemical

Nanoscale zero-valent iron coupling with Shewanella oneidensis MR-1 for enhanced reduction/removal of aqueous Cr(VI)

Liying Ma et al.

Summary: The study explores the efficient reduction/removal of high concentration of hexavalent chromium [Cr(VI)] by coupling nZVI with MR-1, with optimal experimental conditions identified for maximum removal efficiency. The addition of MR-1 is shown to promote dissolution of the passivation layer on the nZVI surface, significantly improving Cr(VI) reduction/removal efficiency. This method may have great potential for reduction and detoxification of Cr(VI) in aqueous environments.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Engineering, Chemical

Flexible and free-standing pristine polypyrrole membranes with a nanotube structure for repeatable Cr(VI) ion removal

Yimeng Li et al.

Summary: In this study, a flexible and free-standing pristine polypyrrole (PPy) membrane with a nanotube structure (PPy-N) was synthesized for the selective removal of Cr(VI) using template-assisted interfacial polymerization (TIP). The PPy-N membrane exhibited superior Cr(VI) adsorption capacity and good regeneration properties, making it a promising candidate for removing Cr(VI) ions from wastewater.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Review Chemistry, Physical

Magnetite modified amino group based polymer nanocomposites towards efficient adsorptive detoxification of aqueous Cr (VI): A review

Rashmi Acharya et al.

Summary: This article discusses the toxicity difference between two forms of chromium in aqueous environment and evaluates the performance of adsorptive detoxification using MNHPCs. It covers synthesis strategies, adsorption parameters, detoxification mechanism, as well as highlights the separation ability and recyclability of this class of adsorbents.

JOURNAL OF MOLECULAR LIQUIDS (2021)

Article Engineering, Environmental

Polypyrrole functionalized Cobalt oxide Graphene (COPYGO) nanocomposite for the efficient removal of dyes and heavy metal pollutants from aqueous effluents

Saroja Anuma et al.

Summary: A heterogenous porous COPYGO composite was synthesized using hydrothermal method, showing efficient removal of pollutants in industrial wastewater with high adsorption capacity and thermal stability.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Engineering, Environmental

Polypyrrole modified bentonite nanocomposite and its application in high-efficiency removal of Cr(VI)

JunKang Guo et al.

Summary: A nanocomposite of chloride doped polypyrrole/bentonite was successfully synthesized for synergistic reduction and adsorptive removal of Cr(VI) contamination in water. The results showed that the nanocomposite significantly enhanced the adsorption capacity and removal efficiency of Cr(VI) compared to individual components, demonstrating a strong synergistic effect between bentonite and Cl-PPy. The adsorption mechanisms were found to involve electrostatic interactions, ion exchange, and reduction of Cr(VI) to Cr(III).

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Article Materials Science, Multidisciplinary

Polypyrrole@polyHIPE Composites for Hexavalent Chromium Removal from Water

Zahra Abbasian Chaleshtari et al.

ACS APPLIED POLYMER MATERIALS (2020)

Article Engineering, Environmental

Microbial Chromate Reduction Coupled to Anaerobic Oxidation of Elemental Sulfur or Zerovalent Iron

Jiaxin Shi et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2019)

Article Thermodynamics

Synthesis of Polypyrrole-Modified Layered Double Hydroxides for Efficient Removal of Cr(VI)

Sumanta Sahu et al.

JOURNAL OF CHEMICAL AND ENGINEERING DATA (2019)

Article Engineering, Chemical

A novel method for removal of Cr(VI) using polypyrrole magnetic nanocomposite in the presence of unsteady magnetic fields

Uyiosa Osagie Aigbe et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2018)

Article Chemistry, Physical

Chromium removal using a magnetic corncob biochar/polypyrrole composite by adsorption combined with reduction: Reaction pathway and contribution degree

Yuqing Yang et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2018)

Article Chemistry, Physical

Enhanced removal of Cr(VI) from aqueous solutions using polypyrrole wrapped oxidized MWCNTs nanocomposites adsorbent

Madhumita Bhaumik et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2016)

Article Engineering, Environmental

High-performance towards Cr(VI) removal using multi-active sites of polypyrrole-graphene oxide nanocomposites: Batch and column studies

Katlego Zebedius Setshedi et al.

CHEMICAL ENGINEERING JOURNAL (2015)

Article Environmental Sciences

Cr(VI) removal from aqueous systems using pyrite as the reducing agent: Batch, spectroscopic and column experiments

Cetin Kantar et al.

JOURNAL OF CONTAMINANT HYDROLOGY (2015)

Article Thermodynamics

Sepiolite Fiber Oriented-Polypyrrole Nanofibers for Efficient Chromium(VI) Removal from Aqueous Solution

Jun Chen et al.

JOURNAL OF CHEMICAL AND ENGINEERING DATA (2014)

Article Engineering, Environmental

Exfoliated polypyrrole-organically modified montmorillonite clay nanocomposite as a potential adsorbent for Cr(VI) removal

Katlego Zebedius Setshedi et al.

CHEMICAL ENGINEERING JOURNAL (2013)

Article Chemistry, Physical

Polypyrrole/palygorskite nanocomposite: A new chromate collector

Chao Yao et al.

APPLIED CLAY SCIENCE (2012)

Article Engineering, Environmental

High efficient removal of chromium(VI) using glycine doped polypyrrole adsorbent from aqueous solution

Niladri Ballav et al.

CHEMICAL ENGINEERING JOURNAL (2012)

Article Engineering, Environmental

Enhanced removal of Cr(VI) from aqueous solution using polypyrrole/Fe3O4 magnetic nanocomposite

Madhumita Bhaumik et al.

JOURNAL OF HAZARDOUS MATERIALS (2011)

Article Engineering, Chemical

Reduction of chromium(VI) by pyrite in dilute aqueous solutions

Yao-Tung Lin et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2008)