4.6 Article

Studies on optical properties, thermal stability and electrical conductivity of copper alumina nanoparticles-reinforced Poly(pyrrole-co-indole) for optoelectronic devices

Related references

Note: Only part of the references are listed.
Article Chemistry, Inorganic & Nuclear

Synthesis, characterization, dielectric properties and gas sensing application of polythiophene/chitosan nanocomposites

K. Amruth et al.

Summary: This paper investigates the polymerization of thiophene monomer in the presence of chitosan nano-powders and analyzes the formation and properties of polythiophene/chitosan nanocomposites. The study confirms the chemical interaction between polythiophene and chitosan nano-powders, as well as the uniform positioning of chitosan in polythiophene. The nanocomposites exhibit improved electrical conductivity and gas sensing performance.

INORGANIC CHEMISTRY COMMUNICATIONS (2022)

Article Engineering, Electrical & Electronic

Synthesis and characteristic studies on pure and nano silver oxide-doped polypyrrole for supercapacitor application

M. Vinitha et al.

Summary: Polypyrrole (PPy) is a commonly used polymer with higher conductivity than other conducting polymers. Synthetic pure PPy and doped n-Ag2OPPy were characterized, showing excellent electrical properties and structural features. The increased conductivity is due to the additional effect of conductivity from the interfacial capacitive region.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2022)

Article Polymer Science

Enhanced optical, thermal and electrical properties of chlorinated natural rubber/zinc ferrite nanocomposites for flexible electrochemical devices

K. Parvathi et al.

Summary: This work investigates the optical, thermal stability, and temperature-dependent electrical properties of chlorinated natural rubber/zinc ferrite nanocomposites. The insertion of zinc ferrite into the rubber matrix leads to a decrease in bandgap energy. The nanocomposites exhibit enhanced thermal stability and electrical properties compared to the parent polymer. Additionally, the conductivity of the nanocomposites shows a non-ohmic behavior, indicating a dynamic relaxation process. The experimental results are in good agreement with theoretical models, suggesting the presence of interfacial interactions in the nanocomposites. These findings are significant for the development of highly-durable flexible electronic devices, actuators, supercapacitors, and elastomeric pressure sensors.

JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY (2022)

Article Engineering, Electrical & Electronic

Facile synthesis of paratoluene sulfonic acid assisted S-doped polyaniline hybrid composite for energy storage devices

Tapas Das et al.

Summary: Ternary composites were prepared by varying the weight ratio of the individuals. Among them, the polyaniline-acetylene-black-cobalt ferrite system showed outstanding electrochemical performances with high specific capacitance, coulombic efficiency, specific energy and power values, as well as good capacitance retention and low charge transfer resistance.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2022)

Article Physics, Multidisciplinary

Influence of NiO and La2O3 nanoparticles on the optical, mechanical and electrical properties of PVAc-PMMA blend: a comparative study

Adel M. El Sayed et al.

Summary: The study successfully prepared NiO and La2O3 nanoparticles and introduced them into a PVAc/PMMA blend. The addition of nanoparticles improved the amorphous structure and optical properties of the films, as well as enhanced their mechanical and dielectric properties. These nanocomposites have great potential for applications in architecture, display screens, and photovoltaic cells.

PHYSICA SCRIPTA (2022)

Article Materials Science, Composites

Compliant materials based on nickel oxide/chlorinated natural rubber nanocomposites

K. Parvathi et al.

Summary: This research article focuses on the preparation of chlorinated natural rubber (Cl-NR)/nickel oxide (NiO) nanocomposites using a simple and environmentally friendly two-roll mill mixing technique. The study demonstrates that increasing the nanofiller content improves the crystallinity, dispersion, glass transition temperature, and mechanical properties of the nanocomposites. In addition, the nanocomposites show higher AC conductivity, dielectric loss, and dielectric constant compared to pure Cl-NR. The incorporation of the nanofiller also reduces the cure time, making the fabrication of rubber products more cost-effective. The study suggests that the nanocomposites with 5 phr NiO loading exhibit the best mechanical and electrical properties and can be used for the fabrication of electromagnetic induction shielding materials, conducting adhesives, and flame-resistant flexible electronic devices.

POLYMER COMPOSITES (2022)

Article Polymer Science

Synthesis, Characterization, Thermal Properties and Temperature-Dependent AC Conductivity Studies of Poly (Butyl Methacrylate)/Neodymium Oxide Nanocomposites

K. Suhailath et al.

Summary: The addition of neodymium oxide nanoparticles enhanced the glass transition temperature and thermal degradation temperature of PBMA, while increasing the electrical conductivity of the nanocomposite. The experimental results demonstrated better compatibility between the components, and the activation energy and exponential values indicated that the system follows small polaron hopping mechanism.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2021)

Review Materials Science, Composites

Enhanced tailored of thermal stability, optical and electrochemical properties ofPANImatrix containingAl2O3hybrid materials synthesized through in situ polymerization

Mohamed Amine Bekhti et al.

Summary: Hybrid materials based on Al2O3 modified with polyaniline have been successfully synthesized through chemical polymerization. Adjusting the amount of Al2O3 during the polymerization process allows for setting the optical properties of the synthesized nanocomposites, resulting in different optical band gap values. The synthesized hybrid materials show good electroactivity response and improved thermal stability.

POLYMER COMPOSITES (2021)

Article Engineering, Electrical & Electronic

Fabrication, characterization, and malaria biomarker VOC-sensing properties of WO3-doped polyaniline

P. Jisha et al.

Summary: The synthesized polyaniline-WO3 nanocomposite was used to make a VOC sensor for detecting malaria biomarker VOCs, showing good sensitivity and response time.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2021)

Article Engineering, Electrical & Electronic

Highly sensitive non-enzymatic electrochemical glucose biosensor based on PANI: β12 Borophene

Cihat Tasaltin et al.

Summary: By preparing PANI: Borophene-based sensors, the sensitivity of glucose sensing can be effectively enhanced, improving detection performance and stability.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2021)

Article Engineering, Electrical & Electronic

Investigations on Al2O3 dispersed PEO/PVP based Na+ ion conducting blend polymer electrolytes

S. Shenbagavalli et al.

Summary: In this study, Na+ ion conducting solid blend polymer electrolytes with Al2O3 filler were prepared and characterized using XRD, FTIR, and AC-impedance techniques. The addition of Al2O3 was found to enhance the ionic conductivity of the electrolytes. CV and LSV studies confirmed the electrochemical behavior of the polymer electrolytes.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2021)

Article Materials Science, Multidisciplinary

Polypyrrole nanotube/ferrocene-modified graphene oxide composites: From fabrication to EMI shielding application

Tengfei Lin et al.

Summary: A series of polypyrrole nanotube/ferrocene-modified graphene oxide composites were prepared and characterized. The composite with the best performance showed the highest electromagnetic interference shielding effectiveness when 50% of the composite was added to the paraffin matrix, and also exhibited good conductivity. The relationship between conductivity and EMI shielding performance was investigated.

JOURNAL OF MATERIALS SCIENCE (2021)

Article Polymer Science

Structural, Electrical and Dielectric Properties of Dodecylbenzene Sulphonic Acid Doped Polypyrrole/Nano-Y2O3 Composites

Muhammad Irfan et al.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2020)

Article Engineering, Electrical & Electronic

Phytic acid-doped poly(aniline-co-pyrrole) copolymers for supercapacitor electrodes applications

Yao Wang et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)

Article Materials Science, Multidisciplinary

Nonlinear optical properties of poly(aniline-co-pyrrole)@ ZnO-based nanofluid

Asal Nowrouzi Gheymasi et al.

OPTICAL MATERIALS (2020)

Review Engineering, Electrical & Electronic

Conducting polymer-based electrically conductive adhesive materials: design, fabrication, properties, and applications

Hossein Derakhshankhah et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)

Article Engineering, Electrical & Electronic

Designing a ternary composite of PPy-PT/ TiO2using TiO2, and multipart-conducting polymers for supercapacitor application

G. Sowmiya et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)

Article Chemistry, Organic

Studies of electric, dielectric properties, and conduction mechanism of {(C2H10N2)(MnCl (NCS)2)2}npolymer

Sahel Karoui et al.

JOURNAL OF PHYSICAL ORGANIC CHEMISTRY (2020)

Article Chemistry, Physical

Physical and optical studies of the novel non-crystalline CuxGe20-xSe40Te40 bulk glasses and thin films

Ahmed Saeed Hassanien et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Article Materials Science, Multidisciplinary

Conducting nanocomposites of polypyrrole-co-polyindole doped with carboxylated CNT: Synthesis approach and anticorrosion/antibacterial/antioxidation property

Moslem Mansour Lakourja et al.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2020)

Article Engineering, Electrical & Electronic

Electrochemical capacitive performance of free-standing polyindole film and effect of introducing alkyl chain connecting two indoles

Lie Zou et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)

Article Polymer Science

Corrosion protection by epoxy/poly(aniline-co-pyrrole)/ZnO nanocomposite coating

Mostafa Golshekan et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2019)

Article Engineering, Electrical & Electronic

Nickel oxide @ polyindole/phenothiazine blend nanocomposites: preparation, characterization, thermal, electrical properties and gas sensing applications

M. T. Ramesan et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)

Article Engineering, Electrical & Electronic

Electrode buffer layers via networks of polythiophene/polyaniline bottlebrushes and carbon nanotubes in organic solar cells

Nafiseh Sorkhishams et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)

Article Materials Science, Multidisciplinary

Electric properties of MnZn ferrite/polyaniline composites: the implication of polyaniline morphology

R. Moucka et al.

JOURNAL OF MATERIALS SCIENCE (2018)

Article Engineering, Electrical & Electronic

A novel composite for energy storage devices: core-shell MnO2/polyindole nanotubes supported on reduced graphene oxides

Weigang Wang et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2018)

Article Materials Science, Multidisciplinary

Hardness, Electrical Conductivity and Thermal Stability of Externally Oxidized Cu-Al2O3 Composite Processed by SPD

Deping Lu et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)

Article Engineering, Electrical & Electronic

Electric modulus based relaxation dynamics, ac-conductivity and I-V characteristics in PTh/[Co(EDTA)NH3Cl] H2O nanocomposite prepared by chemical oxidation method

Mohd. Hanief Najar et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2017)

Article Engineering, Electrical & Electronic

Conductivity properties of hollow ZnFe2O4 nanofibers doped polyaniline nanocomposites

R. D. Balikile et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2017)

Article Engineering, Electrical & Electronic

Nano-sized CuO/ZnO hollow spheres: synthesis, characterization and photocatalytic performance

Mohammad Hassanpour et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2017)

Article Engineering, Electrical & Electronic

Dielectric and nano-scale free volume properties of polyaniline/polyvinyl alcohol nanocomposites

S. El-Gamal et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2015)

Article Materials Science, Multidisciplinary

Structural and magnetic properties of nanocomposites based on nanostructured polyaniline and titania nanotubes

M. Radoicic et al.

JOURNAL OF MATERIALS SCIENCE (2013)

Article Polymer Science

Electrochemical synthesis and characterization of conducting copolymers of biphenyl with pyrrole

Johannis Simitzis et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2012)

Article Polymer Science

Synthesis, characterization and SEESR spectroscopic investigations of Indole/aniline copolymers

Fatih Koeleli et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2008)

Article Chemistry, Physical

Preparation and properties of transparent bulk polymer nanocomposites with high nanophase contents

Yuanrong Cheng et al.

JOURNAL OF MATERIALS CHEMISTRY (2008)

Article Polymer Science

Synthesis and properties of poly(aniline-co-azidoaniline)

Abhijit V. Jadhav et al.

EUROPEAN POLYMER JOURNAL (2007)

Article Materials Science, Multidisciplinary

Electrochemical preparation and characterization of conducting copolymers:: poly(pyrrole-co-indole)

K Dhanalakshmi et al.

JOURNAL OF MATERIALS SCIENCE (2001)