Related references
Note: Only part of the references are listed.Optimization of FSP parameters to fabricate AA7075-based surface composites using Taguchi technique and TOPSIS approach
K. Suganeswaran et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2023)
Study on Microstructure Evolution and Strengthening and Toughening of Friction Stir Processed AA6082-4%Al3Zr In-Situ Composites
Hui Li et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2022)
Influence of Fly Ash and Emery based particulate reinforced AA7075 surface composite processed through friction stir processing
K. Suganeswaran et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2022)
Influence of secondary phase particles Al2O3/SiC on the microstructure and tribological characteristics of AA7075-based surface hybrid composites tailored using friction stir processing
K. Suganeswaran et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2021)
Recent Developments in Hybrid Surface Metal Matrix Composites Produced by Friction Stir Processing: A Review
Daulat Kumar Sharma et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2021)
Experimental investigations of A359/Si3N4 surface composite produced by multi-pass friction stir processing
Ashish Kumar Srivastava et al.
MATERIALS CHEMISTRY AND PHYSICS (2021)
Mechanical and wear performance of Al/SiC surface composite prepared through friction stir processing
Ravi Butola et al.
MATERIALS RESEARCH EXPRESS (2021)
Experimental investigation on joining process of aluminium alloy 6063-T6 pipes using hybrid friction stir welding
S. M. Senthil et al.
Journal of the Brazilian Society of Mechanical Sciences and Engineering (2021)
Corrosion behavioral studies on AA7075 surface hybrid composites tailored through friction stir processing
Suganeswaran Kandasamy et al.
ANTI-CORROSION METHODS AND MATERIALS (2020)
Tailoring grain refinement through thickness in magnesium alloy via stationary shoulder friction stir processing and copper backing plate
Vivek Patel et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Development of multi-pass processed AA6082/SiCp surface composite using friction stir processing and its mechanical and tribology characterization
Sivanesh M. Prabhu et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Different reinforcement strategies of hybrid surface composite AA6061/(B4C+MoS2) produced by friction stir processingVerschiedene Strategien beim Ruhrreibschweissen zur Verstarkung von Hybrid-Oberflachenverbundwerkstoffen aus AA6061/(B4C+MoS2)
D. K. Sharma et al.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (2020)
Fabrication of Hybrid Surface Composites AA6061/(B4C + MoS2) via Friction Stir Processing
Daulat Kumar Sharma et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2019)
Effect of filler material and post process ageing treatment on microstructure, mechanical properties and wear behaviour of friction stir processed AA 7075 surface composites
H. A. Deore et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Surface coating (Al/Cu &Al/SiC) fabricated by direct particle injection tool for friction stir processing: Evolution of phases, microstructure and mechanical properties
P. Muthukumar et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Recent Development in Friction Stir Processing as a Solid-State Grain Refinement Technique: Microstructural Evolution and Property Enhancement
Vivek Patel et al.
CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2019)
Through-thickness microstructure and mechanical properties in stationary shoulder friction stir processed AA7075
Vivek Patel et al.
MATERIALS SCIENCE AND TECHNOLOGY (2019)
Fabrication of AA7005/TiB2-B4C surface composite by friction stir processing: Evaluation of ballistic behaviour
Nitinkumar Pol et al.
DEFENCE TECHNOLOGY (2019)
Hybrid friction stir processing with active cooling approach to enhance superplastic behavior of AA7075 aluminum alloy
Vivek Patel et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2019)
Investigations on micro hardness, electrical and thermal conductivity of AA7075 surface hybrid composites produced through friction stir processing
K. Suganeswaran et al.
MATERIALS RESEARCH EXPRESS (2019)
Synthesis, characterization and mechanical behavior of Al 3003-TiO2 surface composites through friction stir processing
K. Anil Kumar et al.
MATERIALS AND MANUFACTURING PROCESSES (2019)
Non-Destructive Testing and Evaluation of Friction Stir Welded AA6063 Circularly Butted Pipes
S. M. Senthil et al.
RUSSIAN JOURNAL OF NONDESTRUCTIVE TESTING (2019)
Characterization of pine needle ash particulates reinforced surface composite fabricated by friction stir process
Gupta Manoj Kumar et al.
MATERIALS RESEARCH EXPRESS (2019)
Simultaneous improvement of mechanical strength, ductility and corrosion resistance of stir cast Al7075-2% SiC micro- and nanocomposites by friction stir processing
Atul Kumar et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Effect of Tool Shoulder Diameter on Stir Zone Characteristics of Friction Stir Welded HSLA Steel Joints
S. Ragu Nathan et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2016)
Fabrication and characterization of functionally graded Al-SiC nanocomposite by using a novel multistep friction stir processing
Mojtaba Salehi et al.
MATERIALS & DESIGN (2014)
Microstructure and mechanical properties of friction stir welded 18Cr-2Mo ferritic stainless steel thick plate
Jian Han et al.
MATERIALS & DESIGN (2014)
Exploring the effects of SiC reinforcement incorporation on mechanical properties of friction stir welded 7075 aluminum alloy: Fatigue life, impact energy, tensile strength
Mohsen Bahrami et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Ceramic particulate filled ZA-27 metal matrix composites: comparative analysis
S. K. Mishra et al.
MATERIALS SCIENCE AND TECHNOLOGY (2014)
Influence of Al2O3 particles on the microstructure and mechanical properties of copper surface composites fabricated by friction stir processing
L. Suvarna Raju et al.
DEFENCE TECHNOLOGY (2014)
Effect of dual reinforced ceramic particles on high temperature tribological properties of aluminum composites
Suresh Kumar et al.
CERAMICS INTERNATIONAL (2013)
Numerical modeling of friction stir welding process: a literature review
Diogo Mariano Neto et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Effect of friction stir processing on the tensile and fatigue behavior of a cast A206 alloy
R. Kapoor et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Wear and mechanical properties of 6061-T6 aluminum alloy surface hybrid composites [(SiC+Gr) and (SiC+Al2O3)] fabricated by friction stir processing
Devaraju Aruri et al.
Journal of Materials Research and Technology-JMR&T (2013)
Friction Stir Processing of Mild Steel to Enhance its Surface Hardness
H. S. Grewal et al.
ADVANCED X-RAY CHARACTERIZATION TECHNIQUES (2013)
Investigating effects of process parameters on microstructural and mechanical properties of Al5052/SiC metal matrix composite fabricated via friction stir processing
A. Dolatkhah et al.
MATERIALS & DESIGN (2012)
Superplastic tensile behavior of a fine-grained AZ91 magnesium alloy prepared by friction stir processing
Datong Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Effect of friction stir processing on microstructure and mechanical properties of aluminium
Devinder Yadav et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Particle-reinforced aluminum matrix composites produced from powder mixtures via friction stir processing
I. S. Lee et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Surface modification of aluminium by friction stir processing
Adem Kurt et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
A novel technique for development of A356/Al2O3 surface nanocomposite by friction stir processing
Y. Mazaheri et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Solid-State Joining of Metal Matrix Composites: A Survey of Challenges and Potential Solutions
Tracie Prater
MATERIALS AND MANUFACTURING PROCESSES (2011)
Wetting Behaviors and Interfacial Reaction between Sn-10Sb-5Cu High Temperature Lead-free Solder and Cu Substrate
Qiulian Zeng et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2010)
Wear characteristics of surface-hybrid-MMCs layer fabricated on aluminum plate by friction stir processing
Essam R. I. Mahmoud et al.
WEAR (2010)
Microstructures and mechanical properties of Al/Al2O3 surface nano-composite layer produced by friction stir processing
A. Shafiei-Zarghani et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Development of high-performance A356/nano-Al2O3 composites
A. Mazahery et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Microstructural refinement and property enhancement of cast light alloys via friction stir processing
Z. Y. Ma et al.
SCRIPTA MATERIALIA (2008)
Processing and mechanical properties of SiC reinforced cast magnesium matrix composites by stir casting process
Palash Poddar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Friction stir welding of SiC particulate reinforced AA2124 aluminium alloy matrix composite
Huseyin Uzun
MATERIALS & DESIGN (2007)
Friction stir welding and processing
RS Mishra et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2005)
Effects of friction stir processing on mechanical properties of the cast aluminum alloys A319 and A356
ML Santella et al.
SCRIPTA MATERIALIA (2005)
Microstructure and electrical conductivity of high volume Al2O3-reinforced copper matrix composites produced by plasma spray
HK Kang
SURFACE & COATINGS TECHNOLOGY (2005)
The role of residual stress and heat affected zone properties on fatigue crack propagation in friction stir welded 2024-T351 aluminium joints
G Bussu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2003)
Continuous dynamic recrystallization during friction stir welding of high strength aluminum alloys
KV Jata et al.
SCRIPTA MATERIALIA (2000)
Share Paper
