Related references
Note: Only part of the references are listed.The role of the solidification structure on orientation-dependent hardness in stainless steel 316L produced by laser powder bed fusion
Sravya Tekumalla et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Dissimilar laser welding of a CoCrFeMnNi high entropy alloy to 316 stainless steel
J. P. Oliveira et al.
SCRIPTA MATERIALIA (2022)
Influence of initial relative densities on the sintering behavior and mechanical behavior of 316 L stainless steel fabricated by binder jet 3D printing
Zhiping Chen et al.
MATERIALS TODAY COMMUNICATIONS (2022)
Improving the ductility in laser welded joints of CoCrFeMnNi high entropy alloy to 316 stainless steel
J. P. Oliveira et al.
MATERIALS & DESIGN (2022)
Binder jet 3D printing?Process parameters, materials, properties, modeling, and challenges*
Amir Mostafaei et al.
PROGRESS IN MATERIALS SCIENCE (2021)
Effects of process parameters, debinding and sintering on the microstructure of 316L stainless steel produced by binder jetting
Nora Lecis et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Numerical Simulation of Particle Size Influence on the Sintering Behavior of 316L Stainless Steel Powders Fabricated by Binder Jet 3D Printing
Zhiping Chen et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)
Binder jetting additive manufacturing of 316L stainless-steel green parts with high strength and low binder content: Binder preparation and process optimization
Yiwei Mao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
Experimental investigation and numerical simulation analysis of sintered micro-fluidic devices
T. Barriere et al.
POWDER METALLURGY (2020)
Microstructure and properties of hybrid additive manufacturing 316L component by directed energy deposition and laser remelting
Xiao-hui Chen et al.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2020)
Metal Powder Recyclability in Binder Jet Additive Manufacturing
Saereh Mirzababaei et al.
JOM (2020)
Fatigue strength of additively manufactured 316L austenitic stainless steel
Punit Kumar et al.
ACTA MATERIALIA (2020)
Spheroidization behavior of water-atomized 316 stainless steel powder by inductively-coupled thermal plasma
Jae-Young Park et al.
MATERIALS TODAY COMMUNICATIONS (2020)
Empirical process model for shrinkage-induced warpage in 3D printing
Christoph Schmutzler et al.
RAPID PROTOTYPING JOURNAL (2019)
Effect of powder size distribution on densification and microstructural evolution of binder-jet 3D-printed alloy 625
Amir Mostafaei et al.
MATERIALS & DESIGN (2019)
A new approach for fabrication of titanium-titanium boride periodic composite via additive manufacturing and pressure-less sintering
Esmat Sheydaeian et al.
COMPOSITES PART B-ENGINEERING (2018)
Effect of heat treatment on microstructure, mechanical and corrosion properties of austenitic stainless steel 316L using arc additive manufacturing
Xiaohui Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
The effect of inkjetted nanoparticles on metal part properties in binder jetting additive manufacturing
Yun Bai et al.
NANOTECHNOLOGY (2018)
Binder jetting additive manufacturing with a particle-free metal ink as a binder precursor
Yun Bai et al.
MATERIALS & DESIGN (2018)
A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties
Haniyeh Fayazfar et al.
MATERIALS & DESIGN (2018)
Experimental analysis and numerical simulation of sintered micro-fluidic devices using powder hot embossing process
M. Sahli et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
In situ formation of metal matrix composites using binder jet additive manufacturing (3D printing)
Pablo D. Enrique et al.
MATERIALS LETTERS (2018)
Data related to the sinter structure analysis of titanium structures fabricated via binder jetting additive manufacturing
Evan Wheat et al.
DATA IN BRIEF (2018)
Binder-Jet Printing of Fine Stainless Steel Powder with Varied Final Density
Mohsen Ziaee et al.
JOM (2017)
Effect of Particle Size Distribution on Powder Packing and Sintering in Binder Jetting Additive Manufacturing of Metals
Yun Bai et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2017)
Investigation of Sintering Shrinkage in Binder Jetting Additive Manufacturing Process
Yujia Wang et al.
45TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 45) (2017)
A novel method to fabricate TiAl intermetallic alloy 3D parts using additive manufacturing
J. J. S. Dilip et al.
DEFENCE TECHNOLOGY (2017)
Powder bed binder jet 3D printing of Inconel 718: Densification, microstructural evolution and challenges
Peeyush Nandwana et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2017)
Microstructural evolution and mechanical properties of differently heat-treated binder jet printed samples from gas-and water-atomized alloy 625 powders
Amir Mostafaei et al.
ACTA MATERIALIA (2017)
Spark-plasma-sintering and finite element method: From the identification of the sintering parameters of a submicronic alpha-alumina powder to the development of complex shapes
Charles Maniere et al.
ACTA MATERIALIA (2016)
Elastic modulus of 316 stainless steel lattice structure fabricated via binder jetting process
Y. Tang et al.
MATERIALS SCIENCE AND TECHNOLOGY (2016)
Process parameters optimization for improving surface quality and manufacturing accuracy of binder jetting additive manufacturing process
Han Chen et al.
RAPID PROTOTYPING JOURNAL (2016)
Powder bed binder jet printed alloy 625: Densification, microstructure and mechanical properties
Amir Mostafaei et al.
MATERIALS & DESIGN (2016)
An exploration of binder jetting of copper
Yun Bai et al.
RAPID PROTOTYPING JOURNAL (2015)
Evolution of stresses in metal injection molding parts during sintering
Wei Fang et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)
Comparison of density measurement techniques for additive manufactured metallic parts
A. B. Spierings et al.
RAPID PROTOTYPING JOURNAL (2011)
Effect of production parameters on the properties of IN 718 superalloy by three-dimensional printing
M. Turker et al.
MATERIALS CHARACTERIZATION (2008)
3DP process for fine mesh structure printing
Kathy Lu et al.
POWDER TECHNOLOGY (2008)
Experiments and numerical modelling of solid state sintering for 316L stainless steel components
J. Song et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)