☆ 4.5 Article

Characterization of Anisotropic Fracture Behavior of 7075-T6 Aluminum Alloy Sheet under Various Stress States

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2023)

Related references

Note: Only part of the references are listed.

Article Energy & Fuels

China's pathways to peak carbon emissions: New insights from various industrial sectors

Kai Fang et al.

Summary: This study examines the potential peaking pathways of emissions in China's diverse industrial sectors by analyzing the emissions data from the past 23 years. The findings suggest that most sectors are expected to reach their peak emissions before 2040, with Agriculture, Building, Manufacturing, Others, and Transportation sectors likely to peak before 2030. These insights can be valuable for other countries in setting emission reduction targets.

APPLIED ENERGY (2022)

Add to Collection

Article Engineering, Mechanical

The effect of material orientation on void growth

N. Hosseini et al.

Summary: This study reveals the effect of material orientation and angular misalignment on void growth, and proposes a strategic utilization of material orientation and angular misalignment to control void growth.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Mechanical behaviors and microstructure characteristics of W-tempered and peak-aged 7075 alloy sheets under low frequency vibration-assisted tension

Yakun Xu et al.

Summary: This study investigates the mechanism of low frequency vibration-assisted forming in high-strength aluminum alloys. The results demonstrate that low frequency vibration can induce a vibration-softening effect, and increasing the vibration amplitude enhances this effect as well as the stress-overshooting phenomenon. In addition, low frequency vibration influences the mechanical behaviors and microstructure evolution of the materials, including improving the ductility and changing the hardness, as well as increasing the low-angle grain boundaries and dislocation density.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Stress-state-dependent deformation and fracture behaviors in a cold-rolled 7Mn steel

Xing Wei et al.

Summary: The study conducted tensile tests on a recently developed 7Mn steel to investigate the effects of stress state on deformation and fracture characteristics, particularly in relation to retained austenite stability and transformation kinetics. Results revealed significant differences in the transformation kinetics of austenite to martensite under different stress states, with fracture strain being sensitive to stress state. Through digital image correlation and microstructural observations, characteristics of the austenite-to-martensite transformation under various stress states were identified.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Add to Collection

Article Engineering, Civil

Characterization and prediction of fracture in 6000-and 7000-series aluminum alloy sheet under various stress states

Taamjeed Rahmaan et al.

Summary: This study investigates the stress state dependent fracture of high strength aluminum sheet alloys and proposes a generalized Drucker-Prager model to describe the fracture locus. The calibrated fracture loci using the GDP model exhibit good agreement with the measured data, and the model allows for fracture asymmetry in uniaxial and biaxial tension, which is not captured using the Hosford-Coulomb model.

THIN-WALLED STRUCTURES (2022)

Add to Collection

Article Mechanics

A user-friendly anisotropic ductile fracture criterion for sheet metal under proportional loading

Yanshan Lou et al.

Summary: An user-friendly approach was introduced to model the loading direction effect on fracture limits of sheet metals, combined with a newly developed fracture criterion. The method demonstrated high accuracy in predicting anisotropic fracture in different loading conditions for aluminum alloy and steel sheet.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Large strain flow curve identification for sheet metals under complex stress states

Chong Zhang et al.

Summary: The study investigated experimental methods to characterize strain hardening behaviors up to large deformation under different stress states for an aluminum alloy sheet, revealing the effectiveness of the inverse engineering approach in characterizing stress-strain curves up to large plastic deformation. The results also highlight the need to develop advanced yield functions to model yielding and hardening behaviors under complex stress states.

MECHANICS OF MATERIALS (2021)

Add to Collection

Article Engineering, Mechanical

Effect of non-associated flow rule on fracture prediction of metal sheets using a novel anisotropic ductile fracture criterion

Hung Quach et al.

Summary: The ductile fracture behavior of anisotropic materials was studied using the uncoupled ductile fracture criterion for aluminum alloys 6016-AC200. The model considers void nucleation, growth, and evolution of void coalescence, with anisotropic yield function and non-associated flow rule applied for accuracy. Experimental tests and simulations confirmed the efficacy of the proposed fracture criterion for predicting onset of ductile fracture in sheet metal forming.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Effects of constituent particle content on ductile fracture in isotropic and anisotropic 6000-series aluminium alloys

Asle Joachim Tomstad et al.

Summary: The study found that extrusion significantly improves the ductility of aluminum alloys, while a high volume fraction of large-sized constituent particles has a detrimental effect on ductility. However, the negative impact of increased particle volume fraction on ductility is reduced after extrusion.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Engineering, Mechanical

On crystallographic aspects of heterogeneous plastic flow during ductile tearing: 3D measurements and crystal plasticity simulations for AA7075-T651

Thilo F. Morgeneyer et al.

Summary: Crystallographic aspects of heterogeneous plastic flow during ductile tearing are assessed experimentally by combining in situ synchrotron laminography imaging with numerical simulations using the crystal plasticity finite element method. The study reveals the early onset of slant strained bands which eventually lead to the formation of slant cracks. The simulation results show similar trends to the experimental observations, indicating the stability of the slant strained bands over the loading history.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

Add to Collection

Article Engineering, Mechanical

Anisotropic plasticity characterization of 6000-and 7000-series aluminum sheet alloys at various strain rates

Taamjeed Rahmaan et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2020)

Add to Collection

Article Engineering, Mechanical

A new approach for fracture prediction considering general anisotropy of metal sheets

Namsu Park et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

Add to Collection

Article Engineering, Mechanical

Mechanical properties, springback, and formability of W-temper and peak aged 7075 aluminum alloy sheets: Experiments and modeling

Yumi Choi et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Add to Collection

Article Mechanics

Anisotropic fracture modeling of sheet metals: From in-plane to out-of-plane

Bin Gu et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Development of Uncoupled Anisotropic Ductile Fracture Criteria

Ke Ju et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

The Effects of Rotational Speed on Microstructure and Mechanical Properties of Friction Stir-Welded 7075-T6 Thin Sheet

Ali Mehri et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Influence of stress state on plastic flow and ductile fracture of three 6000-series aluminium alloys

Susanne Thomesen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Engineering, Industrial

Damage in metal forming

A. E. Tekkaya et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2020)

Add to Collection

Article Engineering, Mechanical

Strength modeling of sheet metals from shear to plane strain tension

Yanshan Lou et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

Add to Collection

Article Chemistry, Physical

An in-situ study on the dissolution of intermetallic compounds in the Al-Zn-Mg-Cu alloy

Ya Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Mechanics

Modeling anisotropic ductile fracture behavior of Ti-6Al-4V titanium alloy for sheet forming applications at room temperature

Bingtao Tang et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Dynamic perforation of lightweight armor: Temperature-dependent plasticity and fracture of aluminum 7020-T6

Christian C. Roth et al.

MECHANICS OF MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Fracture envelopes on the 3D-DIC and hybrid inverse methods considering loading history

Inje Jang et al.

MATERIALS & DESIGN (2020)

Add to Collection

Article Engineering, Mechanical

Strain rate and temperature dependent fracture of aluminum alloy 7075: Experiments and neural network modeling

Kedar S. Pandya et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2020)

Add to Collection

Article Engineering, Mechanical

Material response, localization, and failure of an aluminum alloy under combined shear and tension: Part I experiments

Martin Scales et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Hybrid Inverse Parameter Identification of Fully Coupled Ductile Damage Model for Steel Sheet DP600 with Two Different Algorithms: Trust Region and Genetic Algorithms

Ke Cao et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)

Add to Collection

Article Chemistry, Physical

Effect of hot extrusion and optimal solution treatment on microstructure and properties of spray-formed Al-11.3Zn-2.65Mg-1Cu alloy

Allah Ditta et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Chemistry, Physical

On the thermal forming limit diagram (TFLD) with GTN mesoscopic damage model for AA7075 aluminum alloy: Numerical and experimental investigation

Liang Ying et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Mechanics

Alternative approach to model ductile fracture by incorporating anisotropic yield function

Yanshan Lou et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2019)

Add to Collection

Article Engineering, Mechanical

Predicting shear fracture of aluminum 6016-T4 during deep drawing: Combining Yld-2000 plasticity with Hosford Coulomb fracture model

Maysam B. Gorji et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

Add to Collection

Article Engineering, Mechanical

Correlation of the maximum shear stress with micro-mechanisms of ductile fracture for metals with high strength-to-weight ratio

Yanshan Lou et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

Add to Collection

Article Mechanics

Anisotropic fracture forming limit diagram considering non-directionality of the equi-biaxial fracture strain

Namsu Park et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2018)

Add to Collection

Article Engineering, Mechanical

Investigation into the shear stress, localization and fracture behaviour of DP600 and AA5182-O sheet metal alloys under elevated strain rates

Taamjeed Rahmaan et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2017)

Add to Collection

Article Engineering, Mechanical

Study of fracture behavior for anisotropic 7050-T7451 high-strength aluminum alloy plate

Jun Cao et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)

Add to Collection

Article Engineering, Mechanical

Anisotropic ductile fracture criterion based on linear transformation

Yanshan Lou et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2017)

Add to Collection

Article Engineering, Mechanical

Fracture-based forming limit criteria for anisotropic materials in sheet metal forming

Namsu Park et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2017)

Add to Collection

Article Mechanics

Modeling of ductile fracture from shear to balanced biaxial tension for sheet metals

Yanshan Lou et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Ductile Fracture Initiation of Anisotropic Metal Sheets

Liang Dong et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)

Add to Collection

Article Engineering, Mechanical

Ductile fracture prediction for metal sheets using all-strain-based anisotropic eMMC model

Yueqian Jia et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2016)

Add to Collection

Article Engineering, Mechanical

Ductile fracture experiments with locally proportional loading histories

Christian C. Roth et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2016)

Add to Collection

Article Mechanics

Ductile failure of aluminum alloy tubes under combined torsion and tension

Martin Scales et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Evolutionary anisotropy and flow stress in advanced high strength steels under loading path changes

Jinwoo Lee et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Add to Collection

Article Mechanics

Ductile fracture of aluminum 2024-T351 under proportional and non-proportional multi-axial loading: Bao-Wierzbicki results revisited

Jessica Papasidero et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)

Add to Collection

Article Materials Science, Multidisciplinary

A study of the influence of precipitate-free zones on the strain localization and failure of the aluminium alloy AA7075-T651

M. Fourmeau et al.

PHILOSOPHICAL MAGAZINE (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Experimental and numerical investigation on ductile fracture mechanism of aluminium alloy using new modified model

R. Zhao et al.

MATERIALS SCIENCE AND TECHNOLOGY (2015)

Add to Collection

Article Engineering, Mechanical

Asymmetric yield function based on the stress invariants for pressure sensitive metals

Jeong Whan Yoon et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2014)

Add to Collection

Article Mechanics

An experimental and numerical investigation of different shear test configurations for sheet metal characterization

Qing Yin et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2014)

Add to Collection

Article Chemistry, Physical

3D microstructural characterization and mechanical properties of constituent particles in Al 7075 alloys using X-ray synchrotron tomography and nanoindentation

Sudhanshu S. Singh et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Ductile failure behavior of polycrystalline Al 6061-T6 under shear dominant loading

A. Ghahremaninezhad et al.

INTERNATIONAL JOURNAL OF FRACTURE (2013)

Add to Collection

Article Engineering, Mechanical

Anisotropic failure modes of high-strength aluminium alloy under various stress states

M. Fourmeau et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2013)

Add to Collection

Article Mechanics

Tension-torsion fracture experiments-Part I: Experiments and a procedure to evaluate the equivalent plastic strain

Jonas Faleskog et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2013)

Add to Collection

Article Mechanics

Ductile failure under combined shear and tension

S. S. Haltom et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2013)

Add to Collection

Article Engineering, Industrial

Prediction of ductile fracture for advanced high strength steel with a new criterion: Experiments and simulation

Yanshan Lou et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)

Add to Collection

Article Engineering, Mechanical

Experiments and modeling of anisotropic aluminum extrusions under multi-axial loading - Part II: Ductile fracture

Meng Luo et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2012)

Add to Collection

Article Mechanics

New ductile fracture criterion for prediction of fracture forming limit diagrams of sheet metals

Yanshan Lou et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)

Add to Collection

Article Engineering, Mechanical

A new analytical theory for earing generated from anisotropic plasticity

J. W. Yoon et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Fracture mechanisms of aluminium alloy AA7075-T651 under various loading conditions

Ketill O. Pedersen et al.

MATERIALS & DESIGN (2011)

Add to Collection

Article Mechanics

Partially coupled anisotropic fracture model for aluminum sheets

Allison M. Beese et al.

ENGINEERING FRACTURE MECHANICS (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Application of extended Mohr-Coulomb criterion to ductile fracture

Yuanli Bai et al.

INTERNATIONAL JOURNAL OF FRACTURE (2010)

Add to Collection

Article Engineering, Mechanical

Quasi-brittle fracture during structural impact of AA7075-T651 aluminium plates

Tore Borvik et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2010)

Add to Collection

Article Mechanics

Hybrid experimental-numerical analysis of basic ductile fracture experiments for sheet metals

Matthieu Dunand et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2010)

Add to Collection

Article Mechanics

Rupture mechanisms in combined tension and shear - Experiments

Imad Barsoum et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2007)

Add to Collection

Article Engineering, Mechanical

Linear transfomation-based anisotropic yield functions

F Barlat et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2005)

Add to Collection

Article Engineering, Mechanical

On fracture locus in the equivalent strain and stress triaxiality space

YB Bao et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.