☆ 4.5 Article

Morphological characteristics and flashing mechanism of superheated liquid jets released from rectangular breaches

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Chemical

Experimental research and simulation of two-phase plume for R134a release and diffusion

Xiyan Guo et al.

Summary: This study focuses on the two-phase release process in LNG accidents, conducting experiments and numerical analysis on the two-phase plume. Results show good consistency between experimental and numerical models, emphasizing the importance of simulating accidents with a liquid-gas phase model.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2022)

Add to Collection

Article Energy & Fuels

Experimental investigations of the phase change impacts on flash boiling spray propagations and impingements

Shuyi Qiu et al.

Summary: This study focuses on the phase change impacts of flash boiling atomization, measuring the volume flux of liquid component using phase Doppler interferometry and investigating the effects of flash boiling spray collapse on spray impingement through laser-induced exciplex fluorescence technique.

FUEL (2022)

Add to Collection

Article Thermodynamics

Split injection flash boiling spray for high efficiency and low emissions in a GDI engine under lean combustion condition *

Zhe Sun et al.

Summary: This study explores the use of flash boiling atomization to achieve a more homogeneous fuel-air mixture for lean combustion in a single cylinder engine. Imaging methods and traditional tests were utilized to evaluate engine performance, showing improved combustion efficiency and emission performance under flash boiling conditions, particularly with split injection schemes.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2021)

Add to Collection

Article Thermodynamics

Experimental investigation on the macroscopic spray and microscopic droplet diameter, velocity and temperature of R404A flashing spray

Zhi-Fu Zhou et al.

Summary: Two-phase flashing spray generates fine atomization with small size and low temperature droplets through explosive atomization and strong evaporation. This study experimentally investigated the macroscopic spray and microscopic droplets of R404A refrigerant, revealing changes in droplet diameter and velocity with increasing axial distance, showing Gaussian distributions. The two-dimensional thermal field contractively patterned after rapid expansion at the nozzle exit, aiding in precise control of the spray cooling area.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Mechanics

A novel method to characterize morphological dynamics and determine flashing jet regimes

Zeyang Song et al.

Summary: A new method for characterizing the nonlinear boundary of expansion zone of flashing jet is proposed in this study and validated through experiments. The graphical parameter k unifies a cluster of spray angles and effectively characterizes morphological dynamics of flashing jet, allowing determination of different flashing jet regimes based on specific criteria for k values.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2021)

Add to Collection

Article Mechanics

Breakup of rectangular liquid jets with controlled upstream disturbances

Mengsen Zhang et al.

Summary: The experimental study investigated the breakup characteristics of micro rectangular jets with external disturbances. The evolution of the ejected rectangular jet was observed to go through three stages, leading to the formation of a structured droplet train. Factors influencing the formation of droplet train were identified, such as jet velocity and disturbance frequency.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2021)

Add to Collection

Article Energy & Fuels

Impact of flash boiling multiple injections timing on the combustion and thermal efficiency of a gasoline direct injection engine under lean-burn

Zhe Sun et al.

Summary: The study demonstrates that flash boiling multiple injections can enhance the combustion of lean gasoline/air mixture by increasing evaporation rate, reducing spray impingement, and optimizing interaction with tumble flow. Under optimized conditions, flash boiling multiple injections significantly improve engine thermal efficiency.

FUEL (2021)

Add to Collection

Article Mechanics

Axis-switching and breakup of rectangular liquid jets

Mohammad Reza Morad et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2020)

Add to Collection

Article Engineering, Chemical

Morphological characteristics of flashing jet throughout superheated liquid release

Xueliang Zhu et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2020)

Add to Collection

Article Energy & Fuels

Empirical correlation for spray half cone angle in plain-jet airblast atomizers

Andras Urban et al.

FUEL (2020)

Add to Collection

Article Engineering, Chemical

Droplets behaviors of flashing jet in accidental release of superheated liquid

Yucheng Zhu et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2020)

Add to Collection

Article Chemistry, Physical

Modeling of underexpanded hydrogen jets through square and rectangular slot nozzles

Xuefang Li et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Add to Collection

Review Thermodynamics

A review of flash evaporation phenomena and resulting shock waves

Ahmad Mansour et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2019)

Add to Collection

Article Engineering, Environmental

Pressure-decay and thermodynamic characteristics of subcooled liquid in the tank and their interaction with flashing jets

Xueliang Zhu et al.

JOURNAL OF HAZARDOUS MATERIALS (2019)

Add to Collection

Article Thermodynamics

Radial expansion of flash boiling jet and its relationship with spray collapse in gasoline direct injection engine

Hengjie Guo et al.

APPLIED THERMAL ENGINEERING (2019)

Add to Collection

Article Engineering, Chemical

Experimental study of flashing LNG jet fires following horizontal releases

Qian-xi Zhang et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2019)

Add to Collection

Article Energy & Fuels

Morphology analysis on multi-jet flash-boiling sprays under wide ambient pressures

Yanfei Li et al.

FUEL (2018)

Add to Collection

Article Thermodynamics

Numerical study on the spray and thermal characteristics of R404A flashing spray using OpenFOAM

Zhi-Fu Zhou et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Add to Collection

Article Thermodynamics

Characteristics and correlation of nozzle internal flow and jet breakup under flash boiling conditions

Shangze Yang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Add to Collection

Article Thermodynamics

Experimental study on the relation between internal flow and flashing spray characteristics of R134a using straight tube nozzles

Xin-Sheng Wang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Add to Collection

Review Engineering, Multidisciplinary

STATE OF THE ART REVIEW OF FLASH-BOILING ATOMIZATION

Tali Bar-Kohany et al.

ATOMIZATION AND SPRAYS (2016)

Add to Collection

Article Energy & Fuels

Near-nozzle spray and spray collapse characteristics of spark-ignition direct-injection fuel injectors under sub-cooled and superheated conditions

Shengqi Wu et al.

FUEL (2016)

Add to Collection

Article Energy & Fuels

Droplet dynamics of DI spray from sub-atmospheric to elevated ambient pressure

Yanfei Li et al.

FUEL (2016)

Add to Collection

Article Mechanics

Towards a unified treatment of fully flashing sprays

Grazia Lamanna et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2014)

Add to Collection

Article Thermodynamics

Macroscopic characteristics for direct-injection multi-hole sprays using dimensionless analysis

Wei Zeng et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2012)

Add to Collection

Article Thermodynamics

An experimental study on the spray and thermal characteristics of R134a two-phase flashing spray

Zhou Zhifu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)

Add to Collection

Article Mechanics

Axis-switching and breakup of low-speed elliptic liquid jets

Ghobad Amini et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2012)

Add to Collection

Article Energy & Fuels

Effect of nozzle orifice geometry on spray, combustion, and emission characteristics under diesel engine conditions

Sibendu Som et al.

FUEL (2011)

Add to Collection

Article Engineering, Chemical

The Viareggio LPG accident: Lessons learnt

Gabriele Landucci et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2011)

Add to Collection

Review Engineering, Environmental

General review of flashing jet studies

Geanette Polanco et al.

JOURNAL OF HAZARDOUS MATERIALS (2010)

Add to Collection

Article Engineering, Chemical

Sub-cooled and flashing liquid jets and droplet dispersion I. Overview and model implementation/validation

Henk W. M. Witlox et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2010)

Add to Collection

Article Mechanics

Experimental investigations of compressible vortex loops

H. Zare-Behtash et al.

PHYSICS OF FLUIDS (2008)

Add to Collection

Article Engineering, Environmental

Flashing liquid jets and two-phase droplet dispersion I. Experiments for derivation of droplet atomisation correlations

Vincent Cleary et al.

JOURNAL OF HAZARDOUS MATERIALS (2007)

Add to Collection

Article Engineering, Environmental

Flashing liquid jets and two-phase droplet dispersion II. Comparison and validation of droplet size and rainout formulations

Henk Witlox et al.

JOURNAL OF HAZARDOUS MATERIALS (2007)

Add to Collection

Article Engineering, Environmental

Modelling of catastrophic flashing releases

DM Deaves et al.

JOURNAL OF HAZARDOUS MATERIALS (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.