4.7 Article

Hydrothermal treatment coupled with pyrolysis and calcination for stabilization of electroplating sludge: Speciation transformation and environmental risk of heavy metals

Related references

Note: Only part of the references are listed.
Article Engineering, Environmental

Synergistic immobilization of chromium in tannery sludge by ZnO and TiO2 and the oxidation mechanism of Cr(III) under alkaline in high temperature

Rui Zhao et al.

Summary: The immobilization of chromium in tannery sludge into spinel-based phases using a synergistic effect between ZnO and TiO2 has been successfully demonstrated, reducing chromium leaching significantly. The importance of this method lies in its ability to suppress the formation of toxic Cr6+ and promote the stable formation of Cr3+ in the sludge, thereby reducing environmental impact.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Article Engineering, Environmental

Study on the transformation of Zn, Mn and Cr during sewage sludge combustion

Hao Liu et al.

Summary: Sewage sludge combustion experiments were conducted to investigate the migration and transformation of Zn, Mn, and Cr, and the results showed that temperature, atmosphere, and steam concentration had significant effects on the process.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2022)

Article Environmental Sciences

Electroplating sludge-derived metal and sulfur co-doping catalyst and its application in methanol production by CO2 catalytic hydrogenation

Hao Hou et al.

Summary: This study successfully synthesized spinel catalyst from electroplating sludge and utilized the transition metals and multi-hetero atoms for CO2 catalytic hydrogenation to produce CH3OH. Metal doping increased the CO2 conversion efficiency but decreased the CH3OH selectivity. Further doping of S significantly increased the CH3OH selectivity.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

Article Engineering, Environmental

Immobilization of heavy metals in biochar derived from co-pyrolysis of sewage sludge and calcium sulfate

Liheng Liu et al.

Summary: The study showed that in the co-pyrolysis of sewage sludge and CaSO4 to produce biochar, appropriate dosage of CaSO4, high pyrolysis temperature, and suitable holding time can improve the immobilization rate of heavy metals. Suitable pyrolysis temperature and holding time promote the formation of crystals and particles in biochar, leading to the immobilization of more heavy metals.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Engineering, Environmental

Characterization of heavy metals in textile sludge with hydrothermal carbonization treatment

Xueying Zhang et al.

Summary: The study showed that hydrothermal carbonization treatment can reduce the bioavailability and leaching rate of heavy metals in textile sludge. Specific treatment temperature and time significantly affect the form and content of heavy metals in sludge. Addition of weak alkaline substance during treatment can promote the transformation of heavy metal forms.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Engineering, Environmental

Co-pyrolysis of sewage sludge and organic fractions of municipal solid waste: Synergistic effects on biochar properties and the environmental risk of heavy metals

Xingdong Wang et al.

Summary: The co-pyrolysis of organic fractions of municipal solid waste with sewage sludge can enhance biochar properties, increase pH values and carbon contents, and transform heavy metals into more stable forms, reducing their environmental risk in blended biochars. However, the addition of PVC hindered biochar properties and compromised heavy metals immobilization during sewage sludge pyrolysis.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Environmental Sciences

Stepwise extraction of Fe, Al, Ca, and Zn: A green route to recycle raw electroplating sludge

Zhan Qu et al.

Summary: By using a simple hydrothermal method and adjusting reaction conditions, the impurities of Fe, Al, and Ca in electroplating sludge were successfully purified as hematite, boehmite, and anhydrite, respectively.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2021)

Article Chemistry, Analytical

Study on co-hydrothermal treatment combined with pyrolysis of rice straw/ sewage sludge: Biochar properties and heavy metals behavior

Sirui Tong et al.

Summary: This study evaluated the co-hydrothermal treatment combined with pyrolysis of rice straw and sewage sludge to produce biochar, aiming to reasonably dispose of sewage sludge as a resource and avoid secondary pollution. Results showed a synergy between rice straw and sewage sludge during the co-HTP process, leading to slightly higher biochar yield than predicted values. The co-HTP process also promoted the increase of aromaticity and stability of biochar, with a significant increase in specific surface area. Additionally, the process decreased the total concentrations of heavy metals in biochar and helped immobilize heavy metals to reduce environmental risks.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2021)

Article Environmental Sciences

Heavy metal solubilisation during the hydrothermal treatment of sludge

Lucia Pola et al.

Summary: The study found that high temperature favors metal immobilization, while pressure variations have little effect on metal immobilization; under different atmospheric conditions, the dissolution and immobilization of heavy metals vary.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2021)

Article Engineering, Environmental

Co-microwave pyrolysis of electroplating sludge and municipal sewage sludge to synergistically improve the immobilization of high-concentration heavy metals and an analysis of the mechanism

Xing Chen et al.

Summary: This study combined microwave pyrolysis technology and the addition of municipal sewage sludge to improve the immobilization of high-concentration heavy metals in electroplating sludge. It was found that co-pyrolysis biochar achieved a significantly higher immobilization rate of HMs, up to 98.00%. The role of organic carbon and inorganic minerals from municipal sewage sludge in immobilizing HMs through physical and chemical effects was highlighted in the study, providing a technical and theoretical basis for the harmless disposal of waste containing multiple HMs with high concentrations.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Engineering, Environmental

Recovery of Cr (VI) from tannery sludge and chrome-tanned leather shavings by Na2CO3 segmented calcination

Hua Long et al.

Summary: The study found that factors such as calcination environment and organic compounds in the materials have significant impact on the recovery of Cr (VI) from Ts and CTLs. By utilizing a segmented calcination method with Na2CO3 as a catalyst, the recovery of Cr (VI) can be effectively increased.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Article Engineering, Environmental

Designing of technological scheme for conversion of Cr-rich electroplating sludge into the black ceramic pigments of consistent composition, following the principles of circular economy

Ljiljana Matovic et al.

Summary: A method for complete conversion of Cr-containing electroplating sludge into black inorganic pigment was developed, overcoming difficulties related to ES complex composition by precise addition of Fe2O3. The obtained pigments have consistent composition and potential large-scale commercial application.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Article Green & Sustainable Science & Technology

Effect of addition of rice husk on the fate and speciation of heavy metals in the bottom ash during dyeing sludge incineration

Teng Wang et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Green & Sustainable Science & Technology

Heavy metals chemical speciation and environmental risk of bottom slag during co-combustion of municipal solid waste and sewage sludge

Limei Chen et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Green & Sustainable Science & Technology

Calcined electroplating sludge as a novel bifunctional material for removing Ni(II)-citrate in electroplating wastewater

Guilong Peng et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Green & Sustainable Science & Technology

Analysis of heavy metals fixation and associated energy consumption during sewage sludge combustion: Bench scale and pilot test

Tao Chen et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Article Construction & Building Technology

Use of electroplating sludge in production of fired clay bricks: Characterization and environmental risk evaluation

Minte Zhang et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Green & Sustainable Science & Technology

Stabilization of electroplating sludge with iron sludge by thermal treatment via incorporating heavy metals into spinel phase

Linqiang Mao et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Article Environmental Sciences

Fate of metals before and after chemical extraction of incinerated sewage sludge ash

Jiang-Shan Li et al.

CHEMOSPHERE (2017)

Article Agricultural Engineering

Total concentrations and chemical speciation of heavy metals in liquefaction residues of sewage sludge

Xingzhong Yuan et al.

BIORESOURCE TECHNOLOGY (2011)

Article Engineering, Environmental

Stabilization of nickel-laden sludge by a high-temperature NiCr2O4 synthesis process

Nien-Hsun Li et al.

JOURNAL OF HAZARDOUS MATERIALS (2011)

Article Engineering, Environmental

Evaluation of metal-ions containing sludges in the preparation of black inorganic pigments

W. Hajjaji et al.

JOURNAL OF HAZARDOUS MATERIALS (2011)

Article Agricultural Engineering

Comparative study of six different sludges by sequential speciation of heavy metals

Ana Fuentes et al.

BIORESOURCE TECHNOLOGY (2008)

Article Construction & Building Technology

Radiation shielding of concretes containing different aggregates

I Akkurt et al.

CEMENT & CONCRETE COMPOSITES (2006)

Article Engineering, Environmental

Extraction and recovery of chromium from electroplating sludge

PTD Silva et al.

JOURNAL OF HAZARDOUS MATERIALS (2006)

Review Chemistry, Multidisciplinary

Roles of water for chemical reactions in high-temperature water

N Akiya et al.

CHEMICAL REVIEWS (2002)