4.7 Article

Multi-criteria optimization of concrete mixes incorporating cenosphere waste and multi-minerals

Related references

Note: Only part of the references are listed.
Article Green & Sustainable Science & Technology

Investigation of the durability of eco-friendly concrete material incorporating artificial lightweight fine aggregate and pozzolanic minerals under dual sulfate attack

Yating Zhang et al.

Summary: This study examined the durability of eco-friendly lightweight concrete (LWC) under sulfate erosion. Results showed that LWC exhibited better resistance to sulfate attack compared to conventional concrete, thanks to its internal curing and adequate cement hydration. Increasing the volume of fly ash led to worse durability. A mix of 20% fly ash, 10% metakaolin, and 10% blast furnace slag showed excellent sulfate resistance with increased flexural strength.

JOURNAL OF CLEANER PRODUCTION (2022)

Article Engineering, Civil

Effect of metakaolin on the mechanical properties and pore characteristics of fiber-reinforced tailing recycled aggregate concrete

Fan Xu et al.

Summary: The study showed that the addition of MK significantly improved the mechanical performance of concrete, with the best results obtained in the mix containing 10% MK. The use of MK reduced the number of pores in concrete and coarsened the micropore structure, with harmless pores having the greatest impact on compressive strength.

STRUCTURES (2022)

Article Green & Sustainable Science & Technology

Effect of multi-minerals on the mechanical behavior and pore structure of fiber reinforced internal-cured green concrete

Yating Zhang et al.

Summary: In this study, multi-minerals were incorporated in fiber reinforced internal-cured green concrete (FRICC) to improve concrete performance and achieve environmental sustainability. The addition of multi-minerals enhanced the strength, anti-cracking performance, and pore structure of FRICC. FRICC with a ternary mix of minerals exhibited the best mechanical performance and pore structure, and also reduced CO2 emissions.

JOURNAL OF CLEANER PRODUCTION (2022)

Article Green & Sustainable Science & Technology

Utilization of surface-modified fly ash cenosphere waste as an internal curing material to intensify concrete performance

Yating Zhang et al.

Summary: This study explores the utilization of fly ash cenosphere as an internal curing material in concrete to partially replace cement. An improved surface modification process is proposed to enhance the water desorption characteristics of the cenosphere, resulting in improved mechanical properties of the concrete.

JOURNAL OF CLEANER PRODUCTION (2022)

Article Construction & Building Technology

A multi-criteria decision-making analysis for the selection of fibres aimed at reinforcing asphalt concrete mixtures

Carlos J. Slebi-Acevedo et al.

Summary: This paper presents two methodologies for selecting the best fiber for asphalt concretes through multi-criteria decision-making analysis. A statistical analysis confirms that synthetic fibers and fibers with high tensile strength and elastic modulus are suitable options.

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2021)

Article Construction & Building Technology

Durability properties of treated recycled aggregate concrete: Effect of optimized ball mill method

Ozgur Cakir et al.

Summary: This study investigated the effects of optimized Ball Mill Method (oBMM) with silica fume (SF) and/or basalt fiber (BF) on durability of treated recycled aggregate concrete (RAiC), finding that oBMM significantly improved the performance of concrete. TOPSIS method was found to be useful in selecting the best concrete series objectively.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Strengthening the very early-age structure of cementitious composites with coal fly ash via incorporating a novel nanoadmixture based on C-S-H phase activators

Grzegorz Ludwik Golewski et al.

Summary: The study demonstrates that the addition of nanoadmixture accelerates the strength growth and leads to a more homogenized and compact cement matrix structure in concrete.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Engineering, Environmental

Utilization of municipal solid waste incineration bottom ash (IBA) aggregates in high-strength pervious concrete

Peiliang Shen et al.

Summary: This study showed that an appropriate amount of IBA can enhance the mechanical properties of concrete, but excessive use can lead to reduced water permeability and mechanical properties. Concrete with 100% IBA can meet the required permeability and compressive strength for permeable pedestrian pavers. Furthermore, the incorporation of IBA in concrete can decrease density and improve thermal insulation.

RESOURCES CONSERVATION AND RECYCLING (2021)

Article Energy & Fuels

Green Concrete Based on Quaternary Binders with Significant Reduced of CO2 Emissions

Grzegorz Ludwik Golewski

Summary: This study investigates plain concretes prepared based on a quaternary binder containing various supplementary cementitious materials (SCMs) to reduce CO2 emissions and improve mechanical properties. The results show that quaternary concrete has high compressive and tensile strengths, and using green concrete based on quaternary binders allows for a significant reduction in carbon emissions.

ENERGIES (2021)

Review Engineering, Environmental

Treatment of municipal solid waste incineration fly ash: State-of-the-art technologies and future perspectives

Yuying Zhang et al.

Summary: Municipal solid waste incineration (MSWI) fly ash is considered hazardous waste that requires specific treatment. In recent years, there has been interest in developing low carbon and sustainable treatment technologies for MSWI fly ash to maximize benefits. This review highlights innovative technologies, resource utilization approaches, and future perspectives for MSWI fly ash management.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Construction & Building Technology

Performance assessment of concrete incorporating recycled coarse aggregates and metakaolin: A systematic approach

Rakesh Muduli et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Review Construction & Building Technology

Performance comparison of cement replacing materials in concrete: Limestone fillers and supplementary cementing materials - A review

Daman K. Panesar et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Green & Sustainable Science & Technology

Multi-criteria optimization of recycled aggregate concrete mixes

Khuram Rashid et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Construction & Building Technology

Effects of pretreated fine lightweight aggregate on shrinkage and pore structure of ultra-high strength concrete

Jianhui Liu et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Perforated cenospheres: A reactive internal curing agent for alkali activated slag mortars

Peiyuan Chen et al.

CEMENT & CONCRETE COMPOSITES (2019)

Article Construction & Building Technology

Hydration, shrinkage, and durability of ternary binders containing Portland cement, limestone filler and metakaolin

Gildas Medjigbodo et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Performances evaluation of binary concrete designed with silica fume and metakaolin

Mohammed Seddik Meddah et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Review Engineering, Environmental

Characteristics and applications of fly ash as a sustainable construction material: A state-of-the-art review

Gang Xu et al.

RESOURCES CONSERVATION AND RECYCLING (2018)

Article Materials Science, Multidisciplinary

Mechanical and microstructural characterization of alkali sulfate activated high volume fly ash binders

Akash Dakhane et al.

MATERIALS & DESIGN (2017)

Proceedings Paper Materials Science, Multidisciplinary

Physiochemical and engineering characteristics of cenosphere and its application as a lightweight construction material- A review

U. S. Agrawal et al.

MATERIALS TODAY-PROCEEDINGS (2017)

Review Construction & Building Technology

Utilization of fly ash cenosphere as lightweight filler in cement-based composites - A review

Asad Hanif et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Internal curing of high performance concrete using cenospheres

Fengjuan Liu et al.

CEMENT AND CONCRETE RESEARCH (2017)

Article Construction & Building Technology

Multi-response optimization of polymer blended concrete: A TOPSIS based Taguchi application

Baris Simsek et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Green & Sustainable Science & Technology

Cement industry greenhouse gas emissions - management options and abatement cost

Raili Kajaste et al.

JOURNAL OF CLEANER PRODUCTION (2016)

Article Green & Sustainable Science & Technology

Analysis on differences of carbon dioxide emission from cement production and their major determinants

Tianming Gao et al.

JOURNAL OF CLEANER PRODUCTION (2015)

Article Green & Sustainable Science & Technology

The properties of the self-compacting concrete with fly ash and ground granulated blast furnace slag mineral admixtures

Hui Zhao et al.

JOURNAL OF CLEANER PRODUCTION (2015)

Article Construction & Building Technology

Gel nanostructure in alkali-activated binders based on slag and fly ash, and effects of accelerated carbonation

Susan A. Bernal et al.

CEMENT AND CONCRETE RESEARCH (2013)

Article Construction & Building Technology

Mechanical and thermal properties of green lightweight engineered cementitious composites

Xiaoyan Huang et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Article Construction & Building Technology

Stability of cenospheres in lightweight cement composites in terms of alkali-silica reaction

Jun-Yan Wang et al.

CEMENT AND CONCRETE RESEARCH (2012)

Article Ecology

A synthesis of carbon dioxide emissions from fossil-fuel combustion

R. J. Andres et al.

BIOGEOSCIENCES (2012)

Article Construction & Building Technology

Strength and corrosion properties of Portland cement mortar and concrete with mineral admixtures

Xianming Shi et al.

CONSTRUCTION AND BUILDING MATERIALS (2011)

Article Energy & Fuels

Characterization of cenospheres collected from ash-pond of a super thermal power plant

A. Sarkar et al.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2008)

Article Construction & Building Technology

Influence of lightweight aggregate on the microstructure and durability of mortar

A Elsharief et al.

CEMENT AND CONCRETE RESEARCH (2005)

Article Materials Science, Multidisciplinary

Processing and characterization of a lightweight concrete using cenospheres

SP McBride et al.

JOURNAL OF MATERIALS SCIENCE (2002)