4.7 Article

Mechanism exploration of the foamed asphalt binder using the Molecular Dynamics (MD) method

Related references

Note: Only part of the references are listed.
Article Green & Sustainable Science & Technology

Foamed warm mix asphalt mixture containing crumb rubber: Foaming optimization and performance evaluation

Jianying Hu et al.

Summary: To address global concerns, warm mix asphalt and crumb rubber modified asphalt have been proposed as green technologies for environmentally-friendly pavement. However, limited research has been done on foamed warm mix asphalt with crumb rubber (FWMA-CR). This study investigates the foaming condition of FWMA-CR binder and evaluates the performance of both the binder and mixture, providing guidance for the production and usage of FWMA-CR.

JOURNAL OF CLEANER PRODUCTION (2022)

Article Engineering, Chemical

Rheological and adhesion properties of nano-organic palygorskite and linear SBS on the composite modified asphalt

Jiao Jin et al.

Summary: In this study, nano-organic palygorskite (O-PAL) was successfully prepared by acid activation and silane modification, and combined with styrene-butadiene-styrene block copolymer (SBS) to improve the properties of asphalt. The addition of O-PAL showed excellent water stability and increased the critical temperature of the modified asphalt by 40%. The combination of O-PAL and SBS is effective for improving anti-aging and storage stability performance of the composite modified asphalt in high-temperature and humid areas.

POWDER TECHNOLOGY (2021)

Article Construction & Building Technology

Strength development and deterioration mechanisms of foamed asphalt cold recycled mixture based on MD simulation

Zhuo Chen et al.

Summary: The recycling and reuse of asphalt pavement have become essential for environmental protection, with the foamed asphalt cold-recycling technology gaining widespread attention. This technology offers advantages such as energy savings, reduced asphalt content, and low transportation costs, and exhibits characteristics of both rigid and flexible pavements. However, the complexity of foamed asphalt mixtures, which include a variety of components like recycled asphalt pavement, water, new asphalt, aggregate, and cement, poses challenges for understanding the interaction mechanisms that affect the strength development and deterioration of the mixture, particularly in the presence of water.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Engineering, Mechanical

Evaluation of Methods for Viscosity Simulations of Lubricants at Different Temperatures and Pressures: A Case Study on PAO-2

Dimitrios Mathas et al.

Summary: This study evaluated methods to compute viscosity and viscosity-pressure relation through atomistic molecular dynamics simulations, finding that using different methods under different conditions can achieve good agreement between simulated and measured values. Proper simulation parameters ensure viscosity convergence, and the choice of force fields for atomic interactions also impacts the results.

TRIBOLOGY TRANSACTIONS (2021)

Article Construction & Building Technology

Fatigue damage and creep characteristics of cement emulsified asphalt composite binder

Yunliang Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Adhesion characteristics of graphene oxide modified asphalt unveiled by surface free energy and AFM-scanned micro-morphology

Juncai Zhu et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Green & Sustainable Science & Technology

Analysis of moisture susceptibility of foamed warm mix asphalt based on cohesion, adhesion, bond strength, and morphology

Shengjie Liu et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Engineering, Environmental

Characterization of adsorption isotherm and density profile in cylindrical nanopores: Modeling and measurement

Yu Pang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Construction & Building Technology

Experimental and molecular dynamics simulation study on thermal, transport, and rheological properties of asphalt

Lingyun You et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Application of diluted methanol to allow the production of latex modified asphalt mixture with lower energy consumption

Muhammad Khuzaimi Aziz et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Self-healing of asphalt binder with cohesive failure: Insights from molecular dynamics simulation

Wei Sun et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Characterizations of foamed asphalt binders prepared using combinations of physical and chemical foaming agents

Mohd Rosli Mohd Hasan et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Influence of foaming on tribological and rheological characteristics of foamed asphalt

Biswajit K. Bairgi et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Prediction of dynamic modulus of asphalt mixture using micromechanical method with radial distribution functions

Jiupeng Zhang et al.

MATERIALS AND STRUCTURES (2019)

Article Construction & Building Technology

Investigation of mixing effect and molecular aggregation between virgin and aged asphalt

Yongjie Ding et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Review Construction & Building Technology

Performance characteristics of asphalt materials based on molecular dynamics simulation - A review

Zixuan Chen et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Characteristics of Water-Foamed Asphalt Mixture under Multiple Freeze-Thaw Cycles: Laboratory Evaluation

Lingyun You et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2018)

Article Construction & Building Technology

Comparative evaluation of rheological properties and micromechanics of non-foamed and foamed asphalt mastic

Yankai Wen et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Performance of ethanol and ethanol-NaHCO3 based foamed WMA mixtures for low emission asphalt technology

Mohd Rosli Mohd Hasan et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Preliminary Laboratory Evaluation of Methanol Foamed Warm Mix Asphalt Binders and Mixtures

Zhanping You et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2017)

Review Construction & Building Technology

A comprehensive review of theory, development, and implementation of warm mix asphalt using foaming techniques

Mohd Rosli Mohd Hasan et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Influence of foaming effect, operation time and health preserving properties of foam epoxy asphalt mixtures

Huang Ming et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Chemistry, Physical

Investigation of asphalt aging behaviour due to oxidation using molecular dynamics simulation

Jielin Pan et al.

MOLECULAR SIMULATION (2016)

Article Construction & Building Technology

Estimation of cumulative energy demand and green house gas emissions of ethanol foamed WMA using life cycle assessment analysis

Mohd Rosli Mohd Hasan et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Construction & Building Technology

Influence of foaming water content on foam asphalt mixtures

Biruk W. Hailesilassie et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Construction & Building Technology

Molecular Dynamics Simulation to Investigate the Influence of SBS on Molecular Agglomeration Behavior of Asphalt

Yongjie Ding et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2015)

Article Chemistry, Physical

Glass Transition and Molecular Mobility in Styrene-Butadiene Rubber Modified Asphalt

Fardin Khabaz et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2015)

Article Construction & Building Technology

Characterization of the effect of foaming water content on the performance of foamed crumb rubber modified asphalt

Xin Yu et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Construction & Building Technology

Influence of six rejuvenators on the performance properties of Reclaimed Asphalt Pavement (RAP) binder and 100% recycled asphalt mixtures

Martins Zaumanis et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Construction & Building Technology

Performance of cold recycling materials with foamed bitumen and increasing percentage of reclaimed asphalt pavement

Matteo Dal Ben et al.

ROAD MATERIALS AND PAVEMENT DESIGN (2014)

Article Energy & Fuels

The Modified Yen Model

Oliver C. Mullins

ENERGY & FUELS (2010)

Article Engineering, Chemical

Bitumen Chemical Foaming for Asphalt Paving Applications

Virginia Carrera et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2010)

Article Chemistry, Physical

Relaxation time, diffusion, and viscosity analysis of model asphalt systems using molecular simulation

Liqun Zhang et al.

JOURNAL OF CHEMICAL PHYSICS (2007)

Article Energy & Fuels

Analyzing properties of model asphalts using molecular simulation

Liqun Zhang et al.

ENERGY & FUELS (2007)