Related references
Note: Only part of the references are listed.Sustained released of bioactive mesenchymal stromal cell-derived extracellular vesicles from 3D-printed gelatin methacrylate hydrogels
Louis J. Born et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2022)
An alginate-poly(acrylamide) hydrogel with TGF-β3 loaded nanoparticles for cartilage repair: Biodegradability, biocompatibility and protein adsorption
Ecem Saygili et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)
Silk Fibroin Enhances Cytocompatibilty and Dimensional Stability of Alginate Hydrogels for Light-Based Three-Dimensional Bioprinting
Eunu Kim et al.
BIOMACROMOLECULES (2021)
3D printed hybrid bone constructs of PCL and dental pulp stem cells loaded GelMA
Senem Buyuksungur et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2021)
In situ bioprinting - Bioprinting from benchside to bedside?
Satnam Singh et al.
ACTA BIOMATERIALIA (2020)
Nanoengineered Osteoinductive Bioink for 3D Bioprinting Bone Tissue
David Chimene et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Encapsulation of Human Natural and Induced Regulatory T-Cells in IL-2 and CCL1 Supplemented Alginate-GelMA Hydrogel for 3D Bioprinting
Juewan Kim et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Bioprinting 101: Design, Fabrication, and Evaluation of Cell-Laden 3D Bioprinted Scaffolds
Kaivalya A. Deo et al.
TISSUE ENGINEERING PART A (2020)
The Influence of Printing Parameters and Cell Density on Bioink Printing Outcomes
Gregory J. Gillispie et al.
TISSUE ENGINEERING PART A (2020)
Production and Characterization of an Integrated Multi-Layer 3D Printed PLGA/GelMA Scaffold Aimed for Bile Duct Restoration and Detection
Yang Xiang et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2020)
3D Bioprinting of Methylcellulose/Gelatin-Methacryloyl (MC/GelMA) Bioink with High Shape Integrity
Hadi Rastin et al.
ACS APPLIED BIO MATERIALS (2020)
Vascularized Bone-Mimetic Hydrogel Constructs by 3D Bioprinting to Promote Osteogenesis and Angiogenesis
Takahisa Anada et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2019)
Advancing Frontiers in Bone Bioprinting
Nureddin Ashammakhi et al.
ADVANCED HEALTHCARE MATERIALS (2019)
Thermally-controlled extrusion-based bioprinting of collagen
Kazim K. Moncal et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2019)
3D Bioprinting: from Benches to Translational Applications
Marcel Alexander Heinrich et al.
SMALL (2019)
The Influence of Astaxanthin on the Proliferation of Adipose-derived Mesenchymal Stem Cells in Gelatin-Methacryloyl (GelMA) Hydrogels
Bo Young Choi et al.
MATERIALS (2019)
3D Bioprinting Using Cross-Linker-Free Silk-Gelatin Bioink for Cartilage Tissue Engineering
Yogendra Pratap Singh et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Anisotropy Properties of Tissues: A Basis for Fabrication of Biomimetic Anisotropic Scaffolds for Tissue Engineering
Pallab Datta et al.
JOURNAL OF BIONIC ENGINEERING (2019)
Enhanced rheological behaviors of alginate hydrogels with carrageenan for extrusion-based bioprinting
Myoung Hwan Kim et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2019)
A novel GeIMA-pHEMA hydrogel nerve guide for the treatment of peripheral nerve damages
Tugba Dursun Usal et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)
Biofabrication of three-dimensional cellular structures based on gelatin methacrylate-alginate interpenetrating network hydrogel
Srikumar Krishnamoorthy et al.
JOURNAL OF BIOMATERIALS APPLICATIONS (2019)
Optimization of collagen type I-hyaluronan hybrid bioink for 3D bioprinted liver microenvironments
Andrea Mazzocchi et al.
BIOFABRICATION (2019)
Ag-loaded MgSrFe-layered double hydroxide/chitosan composite scaffold with enhanced osteogenic and antibacterial property for bone engineering tissue
Dandan Cao et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2018)
Mg-Al and Zn-Al Layered Double Hydroxides Promote Dynamic Expression of Marker Genes in Osteogenic Differentiation by Modulating Mitogen-Activated Protein Kinases
Ha Ram Kang et al.
ADVANCED HEALTHCARE MATERIALS (2018)
Layered double hydroxides: A brief review from fundamentals to application as evolving biomaterials
Geetanjali Mishra et al.
APPLIED CLAY SCIENCE (2018)
High adjuvant activity of layered double hydroxide nanoparticles and nanosheets in anti-tumour vaccine formulations
Shiyu Yan et al.
DALTON TRANSACTIONS (2018)
A General Strategy for Extrusion Bioprinting of Bio-Macromolecular Bioinks through Alginate-Templated Dual-Stage Crosslinking
Kai Zhu et al.
MACROMOLECULAR BIOSCIENCE (2018)
On-line packed magnetic in-tube solid phase microextraction of acidic drugs such as naproxen and indomethacin by using Fe3O4@SiO2@layered double hydroxide nanoparticles with high anion exchange capacity
Maryam Shamsayei et al.
MICROCHIMICA ACTA (2018)
Injectable shear-thinning hydrogels for delivering osteogenic and angiogenic cells and growth factors
Emine Alarcin et al.
BIOMATERIALS SCIENCE (2018)
Effect of Local Alkaline Microenvironment on the Behaviors of Bacteria and Osteogenic Cells
Ji Tan et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
LDH as a multifunctional additive in EVA/TPU blends: Influence on mechanical, thermal, rheological and flame retardancy properties
Joyeeta Dutta et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2018)
Optimization of gelatin-alginate composite bioink printability using rheological parameters: a systematic approach
Teng Gao et al.
BIOFABRICATION (2018)
Synthesis and microstructural characterization of GelMa/PEGDA hybrid hydrogel containing graphene oxide for biomedical purposes
Kaveh Rahimi Mamaghani et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Coaxial extrusion bioprinting of 3D microfibrous constructs with cell-favorable gelatin methacryloyl microenvironments
Wanjun Liu et al.
BIOFABRICATION (2018)
Injectable and 3D Bioprinted Polysaccharide Hydrogels: From Cartilage to Osteochondral Tissue Engineering
Janani Radhakrishnan et al.
BIOMACROMOLECULES (2017)
Response of preosteoblasts to titanium with periodic micro/nanometer scale grooves produced by femtosecond laser irradiation
Peng Chen et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2017)
Novel layered double hydroxides-hydroxyapatite/gelatin bone tissue engineering scaffolds: Fabrication, characterization, and in vivo study
Fateme Fayyazbakhsh et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Enhanced bone tissue regeneration using a 3D printed microstructure incorporated with a hybrid nano hydrogel
Dong Nyoung Heo et al.
NANOSCALE (2017)
Extrusion Bioprinting of Shear-Thinning Gelatin Methacryloyl Bioinks
Wanjun Liu et al.
ADVANCED HEALTHCARE MATERIALS (2017)
Engineering Photocrosslinkable Bicomponent Hydrogel Constructs for Creating 3D Vascularized Bone
Mehdi Kazemzadeh-Narbat et al.
ADVANCED HEALTHCARE MATERIALS (2017)
'Printability' of Candidate Biomaterials for Extrusion Based 3D Printing: State-of-the-Art
Stuart Kyle et al.
ADVANCED HEALTHCARE MATERIALS (2017)
Nanolayered hybrid mediates synergistic co-delivery of ligand and ligation activator for inducing stem cell differentiation and tissue healing
Heemin Kang et al.
BIOMATERIALS (2017)
3D bioprinted graphene oxide-incorporated matrix for promoting chondrogenic differentiation of human bone marrow mesenchymal stem cells
Xuan Zhou et al.
CARBON (2017)
Direct 3D bioprinting of perfusable vascular constructs using a blend bioink
Weitao Jia et al.
BIOMATERIALS (2016)
Iodide removal using LDH technology
Frederick L. Theiss et al.
CHEMICAL ENGINEERING JOURNAL (2016)
Adsorption behavior of bovine serum albumin on Zn-Al and Mg-Al layered double hydroxides
Karina A. B. Nogueira et al.
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2016)
Bioactive Nanocomposite Poly (Ethylene Glycol) Hydrogels Crosslinked by Multifunctional Layered Double Hydroxides Nanocrosslinkers
Heqin Huang et al.
MACROMOLECULAR BIOSCIENCE (2016)
Polycaprolactone-chitosan nanofibers influence cell morphology to induce early osteogenic differentiation
D. Jhala et al.
BIOMATERIALS SCIENCE (2016)
Effect of bioink properties on printability and cell viability for 3D bioplotting of embryonic stem cells
Liliang Ouyang et al.
BIOFABRICATION (2016)
Silver/Reduced Graphene Oxide Hydrogel as Novel Bactericidal Filter for Point-of-Use Water Disinfection
Xiangkang Zeng et al.
ADVANCED FUNCTIONAL MATERIALS (2015)
Magnesium modification of a calcium phosphate cement alters bone marrow stromal cell behavior via an integrin-mediated mechanism
Jing Zhang et al.
BIOMATERIALS (2015)
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Kan Yue et al.
BIOMATERIALS (2015)
Coaxial nozzle-assisted 3D bioprinting with built-in microchannels for nutrients delivery
Qing Gao et al.
BIOMATERIALS (2015)
Layered double hydroxide nanoparticles promote self-renewal of mouse embryonic stem cells through the PI3K signaling pathway
Youjun Wu et al.
NANOSCALE (2015)
Proliferation of preosteoblasts on TiO2 nanotubes is FAK/RhoA related
He Zhang et al.
RSC ADVANCES (2015)
A simple and high-resolution stereolithography-based 3D bioprinting system using visible light crosslinkable bioinks
Zongjie Wang et al.
BIOFABRICATION (2015)
Injectable Graphene Oxide/Hydrogel-Based Angiogenic Gene Delivery System for Vasculogenesis and Cardiac Repair
Arghya Paul et al.
ACS NANO (2014)
25th Anniversary Article: Rational Design and Applications of Hydrogels in Regenerative Medicine
Nasim Annabi et al.
ADVANCED MATERIALS (2014)
The 3D printing of gelatin methacrylamide cell-laden tissue-engineered constructs with high cell viability
Thomas Billiet et al.
BIOMATERIALS (2014)
Nanocomposite Hydrogels for Biomedical Applications
Akhilesh K. Gaharwar et al.
BIOTECHNOLOGY AND BIOENGINEERING (2014)
Effect of layered double hydroxide intercalated with fluoride ions on the physical, biological and release properties of a dental composite resin
Loredana Tammaro et al.
JOURNAL OF DENTISTRY (2014)
3D bioprinting of tissues and organs
Sean V. Murphy et al.
NATURE BIOTECHNOLOGY (2014)
Influence of organically modified Ni-Al layered double hydroxide (LDH) loading on the rheological properties of poly (methyl methacrylate) (PMMA)/LDH blend solution
Samarshi Chakraborty et al.
POWDER TECHNOLOGY (2014)
Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels
Luiz E. Bertassoni et al.
BIOFABRICATION (2014)
Increasing Mechanical Strength of Gelatin Hydrogels by Divalent Metal Ion Removal
Qi Xing et al.
SCIENTIFIC REPORTS (2014)
Aqueous dispersions of layered double hydroxide/polyacrylamide nanocomposites: preparation and rheology
Ziqiao Hu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
3D Graphene Oxide-Polymer Hydrogel: Near-Infrared Light-Triggered Active Scaffold for Reversible Cell Capture and On-Demand Release
Wen Li et al.
ADVANCED MATERIALS (2013)
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Jos Malda et al.
ADVANCED MATERIALS (2013)
Exfoliation and dispersion of micrometer-sized LDH particles in poly(ethylene terephthalate) and their nanocomposite thermal stability
Kongli Xu et al.
APPLIED CLAY SCIENCE (2013)
Folic acid conjugated self-assembled layered double hydroxide nanoparticles for high-efficacy-targeted drug delivery
Li Yan et al.
CHEMICAL COMMUNICATIONS (2013)
Study on novel exfoliated polyampholyte nanocomposite hydrogels based on acrylic monomers and Mg-Al-Cl layered double hydroxide: Synthesis and characterization
Saadet Ozgumus et al.
CHEMICAL ENGINEERING JOURNAL (2013)
Improving Viability of Stem Cells During Syringe Needle Flow Through the Design of Hydrogel Cell Carriers
Brian A. Aguado et al.
TISSUE ENGINEERING PART A (2012)
Mechanical and flame-retardant properties of epoxy/Mg-Al LDH composites
Cristiane M. Becker et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Photocrosslinkable biodegradable responsive hydrogels as drug delivery systems
J. F. Almeida et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2011)
Sol-Gel Transition in Dispersions of Layered Double-Hydroxide Nanosheets
Vikrant V. Naik et al.
LANGMUIR (2011)
Cell-laden microengineered gelatin methacrylate hydrogels
Jason W. Nichol et al.
BIOMATERIALS (2010)
Comparison of different synthesis routes for Mg-Al layered double hydroxides (LDH): Characterization of the structural phases and anion exchange properties
H. -W. Olfs et al.
APPLIED CLAY SCIENCE (2009)
Adsorption of tripolyphosphate from aqueous solution by Mg-Al-CO3-layered double hydroxides
Kun Xing et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2008)
Stable suspension of layered double hydroxide nanoparticles in aqueous solution
ZP Xu et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2006)
Preparation of nanocomposites by exfoliation of ZnAl layered double hydroxides in nonpolar LLDPE solution
W Chen et al.
CHEMISTRY OF MATERIALS (2004)