Related references
Note: Only part of the references are listed.Clinical and radiological results with a 36-mm cobalt-chrome prosthetic head, cross-linked Durasul liners associated with Allofit cups: a more than 10-year follow-up period
Pierre Georis et al.
HIP INTERNATIONAL (2020)
Highly Cross-Linked Polyethylene in Total Hip Arthroplasty in Patients Younger Than 50 Years With Osteonecrosis of the Femoral Head: A Minimum of 10 Years of Follow-Up
Byung-Woo Min et al.
JOURNAL OF ARTHROPLASTY (2020)
Polyethylene Wear With Ceramic and Metal Femoral Heads at 5 Years: A Randomized Controlled Trial With Radiostereometric Analysis
Halldor Bergvinsson et al.
JOURNAL OF ARTHROPLASTY (2020)
A systematic review and meta-analysis of survivorship and wear rates of metal and ceramic heads articulating with polyethylene liners in total hip arthroplasty
Oliver B. Gosling et al.
HIP INTERNATIONAL (2020)
Fifteen-Year Results of Total Hip Arthroplasty With Cobalt-Chromium Femoral Heads on Highly Cross-Linked Polyethylene in Patients 50 Years and Less
Richard D. Rames et al.
JOURNAL OF ARTHROPLASTY (2019)
Comparing In Vivo Performance of Two Highly Cross-Linked Polyethylene Thermal Treatments: Remelting vs Annealing in Acetabular Liners
Alison Suraci et al.
JOURNAL OF ARTHROPLASTY (2019)
Evaluation of vitamin E-diffused highly crosslinked polyethylene wear and porous titanium-coated shell stability: a seven-year randomized control trial using radiostereometric analysis
V. P. Galea et al.
BONE & JOINT JOURNAL (2019)
Comparison of ceramic-on-ceramic bearing vs ceramic-on-highly cross-linked polyethylene-bearing surfaces in total hip arthroplasty for avascular necrosis of femoral head: a prospective cohort study with a mid-term follow-up
Bin Feng et al.
JOURNAL OF ORTHOPAEDIC SURGERY AND RESEARCH (2019)
Femoral Head Penetration Rates of Second-Generation Sequentially Annealed Highly Cross-Linked Polyethylene at Minimum Five Years
Evan R. Deckard et al.
JOURNAL OF ARTHROPLASTY (2019)
Total Hip Arthroplasty Using Hybrid Ceramic Bearing: A Minimum 10-Year Followup Study
Jun-Il Yoo et al.
INDIAN JOURNAL OF ORTHOPAEDICS (2019)
Total Hip Arthroplasty Bearing Surface Trends in the United States From 2007 to 2014: The Rise of Ceramic on Polyethylene
Nathanael D. Heckmann et al.
JOURNAL OF ARTHROPLASTY (2018)
Wear Rates With Large Metal and Ceramic Heads on a Second Generation Highly Cross-Linked Polyethylene at Mean 6-Year Follow-Up
Michael A. Gaudiani et al.
JOURNAL OF ARTHROPLASTY (2018)
Large Metal Heads and Highly Cross-Linked Polyethylene Provide Low Wear and Complications at 5-13 Years
Paul F. Lachiewicz et al.
JOURNAL OF ARTHROPLASTY (2018)
Bearing Surfaces for Total Hip Arthroplasty
Paul F. Lachiewicz et al.
JOURNAL OF THE AMERICAN ACADEMY OF ORTHOPAEDIC SURGEONS (2018)
Comparison of cementless total hip arthroplasty survivorship between metal-on-highly cross-linked polyethylene and ceramic on ceramic bearings: A case control study with a 5-9-year follow-up
Yoshitoshi Higuchi et al.
ORTHOPAEDICS & TRAUMATOLOGY-SURGERY & RESEARCH (2018)
Projected Volume of Primary Total Joint Arthroplasty in the US, 2014 to 2030
Matthew Sloan et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2018)
Choosing a Femoral Head: A Survey Study of Academic Adult Reconstructive Surgeons
Sumon Nandi et al.
JOURNAL OF ARTHROPLASTY (2017)
Highly Cross-Linked Polyethylene Reduces Wear and Revision Rates in Total Hip Arthroplasty A 10-Year Double-Blinded Randomized Controlled Trial
Peter A. Devane et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2017)
Comparison of wear rate and osteolysis between second-generation annealed and first-generation remelted highly cross-linked polyethylene in total hip arthroplasty. A case control study at a minimum of five years
R. Takada et al.
ORTHOPAEDICS & TRAUMATOLOGY-SURGERY & RESEARCH (2017)
Ten-year follow-up study of three alternative bearing surfaces used in total hip arthroplasty in young patients A PROSPECTIVE RANDOMISED CONTROLLED TRIAL
A. Atrey et al.
BONE & JOINT JOURNAL (2017)
Significantly Lower Wear of Ceramic-on-Ceramic Bearings Than Metal-on-Highly Cross-Linked Polyethylene Bearings: A 10-to 14-Year Follow-Up Study
Yoshitoshi Higuchi et al.
JOURNAL OF ARTHROPLASTY (2016)
Alumina Delta-on-Highly Crosslinked-Remelted Polyethylene Bearing in Cementless Total Hip Arthroplasty in Patients Younger than 50 Years
Young-Hoo Kim et al.
JOURNAL OF ARTHROPLASTY (2016)
Polyethylene Wear Associated With 26-and 32-mm Heads in Total Hip Arthroplasty: A Multicenter, Prospective Study
Keisuke Hagio et al.
JOURNAL OF ARTHROPLASTY (2016)
Thirteen- Year Evaluation of Highly Cross-Linked Polyethylene Articulating With Either 28-mm or 36-mm Femoral Heads Using Radiostereometric Analysis and Computerized Tomography
Audrey K. Nebergall et al.
JOURNAL OF ARTHROPLASTY (2016)
Five-Year Experience of Vitamin E-Diffused Highly Cross-Linked Polyethylene Wear in Total Hip Arthroplasty Assessed by Radiostereometric Analysis
Audrey K. Nebergall et al.
JOURNAL OF ARTHROPLASTY (2016)
Long-Term Results of Total Hip Arthroplasty with 28-Millimeter Cobalt-Chromium Femoral Heads on Highly Cross-Linked Polyethylene in Patients 50 Years and Less
Jeffrey B. Stambough et al.
JOURNAL OF ARTHROPLASTY (2016)
Cost Analysis of Ceramic Heads in Primary Total Hip Arthroplasty
Keith J. Carnes et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2016)
The Wear Rate of Highly Cross-Linked Polyethylene in Total Hip Replacement Is Not Increased by Large Articulations A Randomized Controlled Trial
Donald W. Howie et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2016)
Simultaneous measurement of friction and wear in hip simulators
Hani Haider et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2016)
Highly cross-linked polyethylene decreases the rate of revision of total hip arthroplasty compared with conventional polyethylene at 13 years' follow-up
S. A. Hanna et al.
BONE & JOINT JOURNAL (2016)
Oxidized Zirconium Head on Crosslinked Polyethylene Liner in Total Hip Arthroplasty: A 7-to 12-year In Vivo Comparative Wear Study
George K. Karidakis et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2015)
E-vitamin infused highly cross-linked polyethylene: RSA results from a randomised controlled trial using 32 mm and 36 mm ceramic heads
Einar Lindalen et al.
HIP INTERNATIONAL (2015)
The Cost-Utility of Total Hip Arthroplasty: Earlier Intervention, Improved Economics
Carlos J. Lavernia et al.
JOURNAL OF ARTHROPLASTY (2015)
Five-year comparison of wear using oxidised zirconium and cobalt-chrome femoral heads in total hip arthroplasty A MULTICENTRE RANDOMISED CONTROLLED TRIAL
S. S. Jassim et al.
BONE & JOINT JOURNAL (2015)
The rates of wear of X3 highly cross-linked polyethylene at five years when coupled with a 36 mm diameter ceramic femoral head in young patients
E. Selvarajah et al.
BONE & JOINT JOURNAL (2015)
Oxinium modular femoral heads do not reduce polyethylene wear in cemented total hip arthroplasty at five years
B. A. Jonsson et al.
BONE & JOINT JOURNAL (2015)
Minimum five-year wear rate of metal-on-highly cross-linked polyethylene in primary total hip arthroplasty
Caroline Scemama et al.
INTERNATIONAL ORTHOPAEDICS (2015)
Preferred reporting items for systematic review and meta-analysis protocols (PRISMA-P) 2015 statement
David Moher et al.
SYSTEMATIC REVIEWS (2015)
Ceramic on ceramic hip prostheses: a review of past and modern materials
Nathanael Macdonald et al.
ARCHIVES OF ORTHOPAEDIC AND TRAUMA SURGERY (2014)
A Randomized Controlled Trial Comparing Oxinium and Cobalt-Chrome on Standard and Cross-Linked Polyethylene
Zachary A. Morison et al.
JOURNAL OF ARTHROPLASTY (2014)
Practical considerations for volumetric wear analysis of explanted hip arthroplasties
D. J. Langton et al.
BONE & JOINT RESEARCH (2014)
Predicting the cost-effectiveness of total hip and knee replacement A HEALTH ECONOMIC ANALYSIS
P. J. Jenkins et al.
BONE & JOINT JOURNAL (2013)
The cost-effectiveness of total joint arthroplasty: A systematic review of published literature
Meghan E. Daigle et al.
BEST PRACTICE & RESEARCH IN CLINICAL RHEUMATOLOGY (2012)
A prospective randomised controlled trial comparing three alternative bearing surfaces in primary total hip replacement
V. S. Nikolaou et al.
JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME (2012)
Volumetric wear assessment of retrieved metal-on-metal hip prostheses and the impact of measurement uncertainty
P. J. Bills et al.
WEAR (2012)
Bearing couples in total hip arthroplasty
Hiteshkumar Tailor et al.
BRITISH JOURNAL OF HOSPITAL MEDICINE (2010)
Minimum Five-Year Follow-Up Wear Measurement of Longevity Highly Cross-Linked Polyethylene Cup Against Cobalt-Chromium or Zirconia Heads
Ichiro Nakahara et al.
JOURNAL OF ARTHROPLASTY (2010)
Wear is Reduced in THA Performed with Highly Cross-linked Polyethylene
Burak Beksac et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2009)
Femoral Head Size and Wear of Highly Cross-linked Polyethylene at 5 to 8 Years
Paul F. Lachiewicz et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2009)
Differences in Highly Cross-Linked Polyethylene Wear Between Zirconia and Cobalt-Chromium Femoral Heads in Japanese Patients A prospective, randomized study
Kenji Kawate et al.
JOURNAL OF ARTHROPLASTY (2009)
The Epidemiology of Revision Total Hip Arthroplasty in the United States
Kevin J. Bozic et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2009)
Novel method to evaluate femoral head penetration in the polyethylene liner after total hip arthroplasty: three-dimensional evaluation on standing radiographs
Hiroshi Hamaji et al.
JOURNAL OF ORTHOPAEDIC SCIENCE (2008)
How have wear testing and joint simulator studies helped to discriminate among materials and designs?
Harry A. McKellop et al.
JOURNAL OF THE AMERICAN ACADEMY OF ORTHOPAEDIC SURGEONS (2008)
Radiostereometric analysis comparison of wear of highly cross-linked polyethylene against 36-vs 28-mm femoral heads
Charles R. Bragdon et al.
JOURNAL OF ARTHROPLASTY (2007)
Economic evaluation in total hip arthroplasty - Analysis and review of the literature
KJ Bozic et al.
JOURNAL OF ARTHROPLASTY (2004)
Measuring inconsistency in meta-analyses
JPT Higgins et al.
BMJ-BRITISH MEDICAL JOURNAL (2003)
Quantifying heterogeneity in a meta-analysis
JPT Higgins et al.
STATISTICS IN MEDICINE (2002)
Crack growth resistance of alumina, zirconia and zirconia toughened alumina ceramics for joint prostheses
AH De Aza et al.
BIOMATERIALS (2002)
Share Paper
