☆ 4.7 Article

Bi2Se0.5Te2.5/S, N-doped reduced graphene oxide as anode materials for high-performance Lithium ion batteries

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Multidisciplinary

Three-dimensional porous aerogel assembly from ultrathin rGO@SnO2 nanosheets for advanced lithium-ion batteries

Hewei Zhao et al.

Summary: The research team has developed a 3D porous rGO@SnO2 nanosheets aerogel, which successfully meets the high rate and long cycling life requirements of lithium-ion batteries through the design strategy of combining 2D active materials and 3D porous architecture.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Review Chemistry, Physical

The impact of electrode with carbon materials on safety performance of lithium-ion batteries: A review

Xiaomei Jiang et al.

Summary: This review explores the influence of carbon materials on the safety of lithium-ion batteries, highlighting their importance as electrodes and in thermal runaway processes. It also summarizes measures for improving carbon electrode materials and their impact on battery safety.

CARBON (2022)

Add to Collection

Article Chemistry, Physical

Electrochemical phase evolution of tetradymite-type Bi2Te3 in lithium, sodium and potassium ion half cells

Conrad H. R. Gillard et al.

Summary: Tetradymite-type Bi2Te3 is synthesized via a solid-state method and its electrochemical phase evolution upon discharge against Li, Na, and K counter-electrodes is detailed. Rietveld analysis reveals that Li and K systems undergo a sequence of intercalation, conversion, and alloying reactions. Bi2Te3 shows high initial capacities for Li, Na, and K cells, but poor cyclabilities due to large volume changes and irreversibilities. Gravimetric capacities for Li, Na, and K half-cells decrease significantly after several cycles.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

A Se-Doped S@CMK3 Composite as a High-Performance Cathode for Magnesium-Sulfur Batteries with Mg2+/Li+ Hybrid Electrolytes

Di Wu et al.

Summary: The Se-doped S0.96Se0.04@CMK3 composite cathode for magnesium-sulfur batteries exhibits significantly increased electronic conductivity and improved capacity stability compared to the undoped cathode, delivering almost twice the reversible capacity after 110 cycles and better rate performance. This Se-doping strategy presents an effective method for developing high-performance cathodes for Mg-S batteries.

JOURNAL OF PHYSICAL CHEMISTRY C (2021)

Add to Collection

Article Chemistry, Physical

Exploring sodium storage mechanism of topological insulator Bi2Te3 nanosheets encapsulated in conductive polymer

Xiaofeng Liu et al.

Summary: This study synthesized a high-conductive polypyrrole encapsulated Bi2Te3 composite, demonstrating excellent electrochemical performance and stability in sodium ion batteries. The reaction mechanism of the composite was revealed through experiments and calculations, providing a reliable strategy for the development of topological insulator as anode materials for sodium-ion batteries.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Electrochemistry

A one-pot method to fabricate reduced graphene oxide (rGO)-coated Si@SiOx@β-Bi2O3/Bi composites for lithium-ion batteries

Shengyang Huang et al.

Summary: The novel rGO-coated Si@SiOx@beta-Bi2O3/Bi composite exhibits high specific capacity and cycling stability, mainly achieved through the structural integrity guarantee of Si-core by Bi2O3 shell and synergistic action with Bi nanodots to expedite Li+/e(-) transport kinetics.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Chemistry, Physical

SnSe coupled with nitrogen/sulfur dual-doped rGO for superior anode of lithium ion batteries

Yaopeng Chen et al.

Summary: The composite of SnSe coupled with nitrogen/sulfur dual-doped rGO (SnSe@N/S-rGO) is reported as a superior anode material for LIBs, exhibiting high capacity and encouraging electrochemical performance.

IONICS (2021)

Add to Collection

Article Chemistry, Physical

PbSe/sulfur-doped carbon nanocube composites prepared from Pb-MOF precursors as anode materials for lithium and sodium-ion batteries

Tianming Lu et al.

Summary: PbSe/sulfur-doped carbon nanocube composites were successfully synthesized and show promising potential as anode materials for lithium-ion batteries and sodium-ion batteries due to their excellent electrochemical performance and cyclic stability.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Morphology and nanostructured features in BiSbTe and BiSeTe solid solutions obtained by hot extrusion

G. N. Kozhemyakin et al.

Summary: The microcrystalline structure of (Bi1-xSbx)2Te3 (p-type) and (Bi1-xSex)2Te3 (n-type) solid solutions was studied using optical and scanning electron microscopes, characterized by X-ray diffraction and X-ray energy dispersive spectroscopy in SEM. The semiconductor thermoelectric materials were obtained by hot extrusion method, resulting in polycrystalline pieces with nanocrystalline structure formed by nanocrystals and voids. The p-type extrusions consisted of spherical nanocrystals with dimensions up to 100 nm, while the n-type extrusions were comprised of interwoven fibers with lengths up to 50 μm and diameters of 20-200 nm.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Conversion-alloying dual mechanism anode: Nitrogen-doped carbon-coated Bi2Se3 wrapped with graphene for superior potassium-ion storage

Kuan-Ting Chen et al.

Summary: The construction of an anode material with a conversion-alloying dual mechanism has facilitated the development of high-energy density potassium-ion batteries. The Bi2Se3@NC@rGO composite exhibits excellent electrode integrity and electrochemical kinetics, achieving a high reversible capacity, great rate capability, and ultra-long cycling life. The K-ion full cell assembled using K2Ni[Fe(CN)(6)] cathode also contributes to a high-energy density and excellent cyclability.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Materials Science, Ceramics

Electrochemical performance of Bi2Te3/GO composite anode for LIB application

Khalid B. Masood et al.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2020)

Add to Collection

Article Physics, Applied

Effect of the Se → Te substitutions on thermal properties of binary Bi2Se3 semiconductor

S. R. Azimova et al.

MODERN PHYSICS LETTERS B (2020)

Add to Collection

Article Engineering, Chemical

One-step solvothermal synthesis of BiSbTe3/N-doped reduced graphene oxide composite as lithium-ion batteries anode materials

Yaqin Zhu et al.

CHEMICAL ENGINEERING SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Carbon-encapsulated Bi2Te3 derived from metal-organic framework as anode for highly durable lithium and sodium storage

Siying Wen et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Review Chemistry, Physical

An overview of graphene and its derivatives reinforced metal matrix composites: Preparation, properties and applications

Zhanyong Zhao et al.

CARBON (2020)

Add to Collection

Article Chemistry, Physical

Bi2Se3@C Rod-like Architecture with Outstanding Electrochemical Properties in Lithium/Potassium-Ion Batteries

Tao Yang et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Enhanced thermoelectric performance of n-type Bi2Te3 alloyed with low cost and highly abundant sulfur

Iram Malik et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

Add to Collection

Article Materials Science, Ceramics

Bismuth metal-organic frameworks derived bismuth selenide nanosheets/nitrogen-doped carbon hybrids as anodes for Li-ion batteries with improved cyclic performance

Zhongchun Li et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Electrochemistry

Polyborosilazane derived ceramics - Nitrogen sulfur dual doped graphene nanocomposite anode for enhanced lithium ion batteries

Muhammad Idrees et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Article Chemistry, Physical

Enhanced electronic conductivity and sodium-ion adsorption in N/S co-doped ordered mesoporous carbon for high-performance sodium-ion battery anode

Jianqi Ye et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Materials Science, Ceramics

Structural and electrochemical studies of undoped and In3+-doped cobinary Cu2-xTe and Bi2Te3 thin films for aqueous Na-S batteries

Rawita Sreerung et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Chemistry, Physical

Chemical bonding boosts nano-rose-like MoS2 anchored on reduced graphene oxide for superior potassium-ion storage

Shaokun Chong et al.

NANO ENERGY (2019)

Add to Collection

Article Chemistry, Inorganic & Nuclear

BiSbS3@N-doped carbon core-shell nanorods as efficient anode materials for sodium-ion batteries

Siying Wen et al.

DALTON TRANSACTIONS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

In Situ Synthesis of CuCo2S4@N/S-Doped Graphene Composites with Pseudocapacitive Properties for High-Performance Lithium-Ion Batteries

Pengxiang Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Engineering, Environmental

Boosting lithium-ion storage performance by synergistically coupling Zn0.76Co0.24S with N-/S-doped carbon and carbon nanofiber

Xiaojie Yin et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Hierarchical CoTe2 Nanowire Array: An Effective Oxygen Evolution Catalyst in Alkaline Media

Lei Ji et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Graphene-Loaded Bi2Se3: A Conversion-Alloying-type Anode Material for Ultrafast Gravimetric and Volumetric Na Storage

Dan Li et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Carbon/two-dimensional MoTe2 core/shell-structured microspheres as an anode material for Na-ion batteries

Jung Sang Cho et al.

NANOSCALE (2017)

Add to Collection

Article Chemistry, Physical

Bio-inspired engineering of Bi2S3-PPy yolk-shell composite for highly durable lithium and sodium storage

Haichen Liang et al.

NANO ENERGY (2017)

Add to Collection

Article Materials Science, Ceramics

CNTs@C@Bi2Se3 composite as an improved-performance anode for lithium ion batteries

Rencheng Jin et al.

CERAMICS INTERNATIONAL (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Exfoliation of Layered Topological Insulators Bi2Se3 and Bi2Te3 via Electrochemistry

Adriano Ambrosi et al.

ACS NANO (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Three-Dimensional Hierarchical Reduced Graphene Oxide/Tellurium Nanowires: A High-Performance Freestanding Cathode for Li-Te Batteries

Jiarui He et al.

ACS NANO (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructural characterization of sulfur-doped Bi2Te3 crystals

Chaolun Liang et al.

MATERIALS CHARACTERIZATION (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Solvothermal synthesis and electrochemical properties of S-doped Bi2Se3 hierarchical microstructure assembled by stacked nanosheets

Fangxin Mao et al.

RSC ADVANCES (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Reduced Graphene Oxide/Tin-Antimony Nanocomposites as Anode Materials for Advanced Sodium-Ion Batteries

Liwen Ji et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Add to Collection

Article Electrochemistry

Enhanced Performance of Lithium Sulfur Battery with a Reduced Graphene Oxide Coating Separator

Wei Lin et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

Add to Collection

Article Chemistry, Physical

Tellurium@Ordered Macroporous Carbon Composite and Free-Standing Tellurium Nanowire Mat as Cathode Materials for Rechargeable Lithium-Tellurium Batteries

Ning Ding et al.

ADVANCED ENERGY MATERIALS (2015)

Add to Collection

Article Chemistry, Physical

Lithium-tellurium batteries based on tellurium/porous carbon composite

Ying Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Add to Collection

Review Chemistry, Multidisciplinary

Graphene-based electrodes for electrochemical energy storage

Chaohe Xu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2013)

Add to Collection

Article Chemistry, Physical

Self-Assembly of Bi2Te3-Nanoplate/Graphene-Nanosheet Hybrid by One-Pot Route and Its Improved Li-Storage Properties

Fangfang Tu et al.

MATERIALS (2012)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Top-down fabrication of nano-scaled Bi2Se0.3Te2.7 associated by electrochemical Li intercalation

Jikun Chen et al.

DALTON TRANSACTIONS (2011)

Add to Collection

Article Physics, Condensed Matter

Features of the Charge-Transport Mechanism in Layered Bi2Te3 Single Crystals Doped with Chlorine and Terbium

N. A. Abdullaev et al.

SEMICONDUCTORS (2011)

Add to Collection

Article Physics, Condensed Matter

Effect of annealing on the structure of Bi2Te3-Bi2Se3 films

N. M. Abdullayev et al.

SEMICONDUCTORS (2010)

Add to Collection

© Peeref 2019-2024. All rights reserved.