☆ 4.7 Article

Investigation of PCBM/ZnO and C60/BCP-based electron transport layer for high-performance p-i-n perovskite solar cells

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Multifunctional passivation agents for improving efficiency and stability of perovskite solar cells: Synergy of methyl and carbonyl groups

Se-Phin Cho et al.

Summary: This study explores the use of bi-functional and multi-functional passivation agents to enhance the performance of perovskite solar cells, showing that these compounds can improve the crystallinity and charge collection capabilities of perovskite films. By introducing different functional groups, such as COCH3 groups comprising piperidine rings, CH3, and C = O, the defect passivation effect is further enhanced, resulting in an increased power conversion efficiency (PCE) of 19.67%. Additionally, the Voc and long-term stability of COCH3-based PesC are substantially improved.

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Article Engineering, Environmental

Defect passivation and interface modification by tetra-n-octadecyl ammonium bromide for efficient and stable inverted perovskite solar cells

Weizhi Liu et al.

Summary: The introduction of TODB post-treatment in inverted PSCs can enhance device performance and stability, including defect passivation, built-in electric field enhancement, and hydrophobicity improvement.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Energy & Fuels

Efficient Slot-Die-Processed Perovskite Solar Cells With 3-Allyloxy-1, 2-Propanediol Additive

Hyun-Jung Lee et al.

Summary: In this study, a functional additive-assisted slot-die-coating process was used to fabricate high-quality perovskite films, resulting in improved performance and stability of perovskite solar cells. The addition of 3-allyloxy-1, 2-propanediol (AP) in the perovskite precursor solution led to the formation of a high-quality film and the suppression of surface defects.

IEEE JOURNAL OF PHOTOVOLTAICS (2022)

Add to Collection

Article Chemistry, Physical

Revealing key factors of efficient narrow-bandgap mixed lead-tin perovskite solar cells via numerical simulations and experiments

Wenjun Zhang et al.

Summary: This study investigates key factors for achieving high-performance narrow-bandgap Pb-Sn perovskite solar cells through numerical simulations. The results show that a p-i-n structure with appropriate charge transport layers and optimizing surface defect density, body defect density, and film thickness can significantly improve device performance. The simulations suggest that fully optimized narrow-bandgap Pb-Sn PSCs can achieve a power conversion efficiency of 28.56%. The study also successfully fabricates efficient narrow-bandgap Pb-Sn single-junction and all-perovskite tandem PSCs, demonstrating the potential for further improvement in the future.

NANO ENERGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Efficient mixed-cation perovskite photovoltaic cells via additive-assisted slot-die deposition

Hyun-Jung Lee et al.

Summary: The main aim of this study was to enhance the quality of slot-die-processed perovskite film layer by using an additive process, which could improve the performance and stability of perovskite devices. The addition of 2-hydroxyethyl acrylate (HEA) as an effective functional group controlled the growth, grain size, and defects of perovskite. The resulting device fabricated with HEA as an additive achieved a high efficiency of 16.08% and maintained an initial efficiency of 80% under air for 95 days.

MATERIALS RESEARCH BULLETIN (2022)

Add to Collection

Article Crystallography

Hydrogen Bonds in Precursor Solution: The Origin of the Anomalous J-V Curves in Perovskite Solar Cells

Lin Zhang et al.

Summary: Perovskite Solar Cells are a promising solar energy harvesting technology that can achieve high efficiency at low cost. This study investigates the use of a gas quenching process (GQP) to eliminate the need for toxic solvents in perovskite layer preparation. The research finds that the quality of perovskite crystal from GQP is more sensitive to Lewis base molecules in the precursor solution compared to traditional anti-solvent technology.

CRYSTALS (2022)

Add to Collection

Article Chemistry, Physical

High-effective SnO2-based perovskite solar cells by multifunctional molecular additive engineering

Chunyan Wang et al.

Summary: The study utilized SnO2 as the electron transport layer and incorporated FTPS molecule as an additive, resulting in the fabrication of a high-effective planar perovskite solar cell with improved electron transport and reduced defects and non-radiative recombination, achieving high efficiency and stability.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

Enhanced performance of p-i-n perovskite solar cell via defect passivation of nickel oxide/perovskite interface with self-assembled monolayer

Dilpreet Singh Mann et al.

Summary: By introducing the self-assembly molecule TSPA between NiOx and perovskite film in perovskite solar cells, surface defects were reduced while energy level alignment and charge extraction capabilities were improved, resulting in a significant increase in power conversion efficiency and long-term stability of the cells.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Ultra-thin and high transparent Cu2ZnSnSe4/NiOx double-layered inorganic hole-transporting layer for inverted structure CH3NH3PbI3 perovskite solar cells

Ching-Ho Tien et al.

Summary: In this study, a low-cost, highly transparent, and ultra-thin Cu2ZnSnSe4 (CZTSe) combined with NiOx film double-layered inorganic hole transporting layer (HTL) was presented for inverted CH3NH3PbI3 perovskite solar cells, aiming to enhance hole extraction and suppress electron transport. The double-layer HTL showed significant improvements in open-circuit voltage, short-circuit current density, fill factor, and power conversion efficiency of the solar cell, while also enhancing the stability of the device.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

Efficient and stable planar perovskite solar cells with a PEDOT:PSS/SrGO hole interfacial layer

Dilpreet Singh Mann et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Stability enhancement of inverted perovskite solar cells using LiF in electron transport layer

Dawei Tan et al.

ORGANIC ELECTRONICS (2020)

Add to Collection

Article Chemistry, Physical

High-Power and Flexible Indoor Solar Cells via Controlled Growth of Perovskite Using a Greener Antisolvent

Soyoung Kim et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Article Energy & Fuels

Interfacial defects passivation using fullerene-polymer mixing layer for planar-structure perovskite solar cells with negligible hysteresis

Xiaofei Hu et al.

SOLAR ENERGY (2020)

Add to Collection

Article Chemistry, Physical

Stabilizing n-type hetero-junctions for NiOx based inverted planar perovskite solar cells with an efficiency of 21.6%

Wei Chen et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Physical

Investigation of sol-gel and nanoparticle-based NiOx hole transporting layer for high-performance planar perovskite solar cells

You-Hyun Seo et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Chemistry, Physical

A systematic approach to ZnO nanoparticle-assisted electron transport bilayer for high efficiency and stable perovskite solar cells

Sung-Nam Kwon et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Chemistry, Physical

Thermally evaporated two-dimensional SnS as an efficient and stable electron collection interlayer for inverted planar perovskite solar cells

Hikmet Coskun et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Impact of PCBM/C60 electron transfer layer on charge transports on ordered and disordered perovskite phases and hysteresis-free perovskite solar cells

Gon Namkoong et al.

ORGANIC ELECTRONICS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Effect of BCP buffer layer on eliminating charge accumulation for high performance of inverted perovskite solar cells

Chuanliang Chen et al.

RSC ADVANCES (2017)

Add to Collection

Review Energy & Fuels

Stability of perovskite solar cells

Dian Wang et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2016)

Add to Collection

Article Chemistry, Physical

Air-Stable, Efficient Mixed-Cation Perovskite Solar Cells with Cu Electrode by Scalable Fabrication of Active Layer

Yehao Deng et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

High-performance planar heterojunction perovskite solar cells: Preserving long charge carrier diffusion lengths and interfacial engineering

Sai Bai et al.

NANO RESEARCH (2014)

Add to Collection

© Peeref 2019-2024. All rights reserved.