☆ 4.7 Article

Anchoring of 2D CdS on Nb2CTX MXene nanosheets for boosting photocatalytic H2 evolution

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Related references

Note: Only part of the references are listed.

Review Engineering, Environmental

Role of surface morphology and terminating groups in titanium carbide MXenes (Ti3C2Tx) cocatalysts with engineering aspects for modulating solar hydrogen production: A critical review

Areen Sherryna et al.

Summary: Hydrogen production through photoinduced water splitting is considered one of the best alternatives for clean and renewable energy. MXene, specifically titanium carbide (Ti3C2Tx) MXene, has shown great potential as a co-catalyst for solar to hydrogen conversion due to its flexible structure, surface morphology, and adjustable termination groups. This review discusses recent advances in the morphological design of Ti3C2Tx MXene and analyzes the role of termination groups in promoting photoactivity and product selectivity.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Physical

Ultrafine SnO2 nanoparticles on delaminated MXene nanosheets as an anode for lithium-ion batteries

Chen Zhao et al.

Summary: In this study, a ball-milling assisted exfoliation method was used to produce delaminated MXene nanosheets, which were then combined with SnO2 nanocrystals to form SnO2/MXene nanocomposites. These nanocomposites exhibited high capacity and long cycling life.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Materials Science, Ceramics

Efficient photocatalytic hydrogen evolution coupled with benzaldehyde production over 0D Cd0.5Zn0.5S/2D Ti3C2 Schottky heterojunction

Junnan Tao et al.

Summary: The novel dual-functional 0D Cd0.5Zn0.5S/2D Ti3C2 hybrid was fabricated to enhance the photocatalytic efficiency for simultaneous water-to-hydrogen conversion and benzyl alcohol-to-benzaldehyde oxidation under visible light illumination. By increasing the contact area and forming Schottky barrier (SB) sites, the hybrid showed improved electron-hole separation and light utilization. Experimental measurements and density functional theory (DFT) calculations supported the efficient performance of the hybrid catalyst in hydrogen evolution and benzaldehyde production.

JOURNAL OF ADVANCED CERAMICS (2022)

Add to Collection

Article Chemistry, Physical

S-scheme heterostructure based on ultrathin 2D CdS coated W18O49 nanosheets-assembled network for highly-efficient photocatalytic H2 evolution

Ya Xiong et al.

Summary: By designing a novel step-scheme 2D CdS/W18O49 heterostructure, the problem of severe photo-corrosion and rapid recombination of electrons and holes in ultrathin CdS nanosheets for photocatalytic hydrogen evolution has been solved. The resulting 40 wt% CdS/W18O49 (CW40) exhibits a prominent photocatalytic H-2 production rate and high apparent quantum efficiency, and it can protect CdS from photo-corrosion, showing outstanding stability.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Chemistry, Physical

Facile fabrication of a metal-free 2D-2D Nb2CTx@g-C3N4 MXene-based Schottky-heterojunction with the potential application in photocatalytic processes

Lekgowa C. Makola et al.

Summary: By combining niobium carbide (Nb2CTx) MXene co-catalyst with graphitic carbon nitride (g-C3N4) as the primary photocatalyst, an efficient photo-responsive Schottky-heterojunction photocatalyst is successfully prepared. The catalyst exhibits visible-light absorption and a lowered energy bandgap, showing great potential for promoting photocatalytic reactions.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Chemistry, Applied

Integration of 2D layered CdS/WO3 S-scheme heterojunctions and metallic Ti3C2 MXene-based Ohmic junctions for effective photocatalytic H2 generation

Junxian Bai et al.

Summary: A 2D/2D/2D layered heterojunction photocatalyst with cascaded 2D coupling interfaces was designed and constructed, which effectively promoted spatially directional charge separation and transport between CdS and WO3 nanosheets, resulting in an increased visible-light hydrogen evolution rate.

CHINESE JOURNAL OF CATALYSIS (2022)

Add to Collection

Article Chemistry, Physical

In situ construction of 1D CdS/2D Nb2CTx MXene Schottky heterojunction for enhanced photocatalytic hydrogen production activity

Jingran Huang et al.

Summary: A one-step solvothermal method was used to grow CdS nanorods on Nb2CTX, forming a 1D/2D Schottky heterojunction to enhance photocatalytic activity. The CdS/Nb2CTX composite showed significantly improved hydrogen production rate under visible light compared to pristine CdS.

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Article Chemistry, Applied

Nb2CTx MXene: High capacity and ultra-long cycle capability for lithium-ion battery by regulation of functional groups

Jiabao Zhao et al.

Summary: MXenes are known for their potential application in supercapacitors due to high-rate intercalation pseudocapacitance and long cyclability, but low capacity of pristine MXenes limits their practical use in lithium-ion batteries. A robust strategy has been developed to control the functional groups of Nb2CTx MXene, significantly increasing its capacity through Li+ intercalation and surface modification. This approach has shown promising results in enhancing the electrochemical performance and potential application of MXenes in lithium-ion batteries.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Article Chemistry, Physical

Synergy of photocatalysis and photothermal effect in integrated 0D perovskite oxide/2D MXene heterostructures for simultaneous water purification and solar steam generation

Deqi Fan et al.

Summary: Inspired by plant transpiration and natural photosynthesis, bifunctional properties of mixed-dimensional Ti3C2Tx/MXene and La0.5Sr0.5CoO3/LSC nanohetero-structures were explored for degrading pollutants and producing fresh water simultaneously. Through the assembly of MXene/LSC hydrogels, high light-to-heat conversion efficiency and photodegradation efficiency were achieved, along with excellent water evaporation capacity for purifying brine and wastewater.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Add to Collection

Article Engineering, Environmental

Engineering highly active Ag/Nb2O5@Nb2CTx (MXene) photocatalysts via steering charge kinetics strategy

Chao Peng et al.

Summary: Steering charge kinetics is crucial in photocatalysis. In this study, Nb2O5 nanorods were grown on Nb2CTx MXenes, forming hierarchical nanohybrids with excellent photocatalytic performance, showcasing the potential of MXenes for high-performance heterojunction structures.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

The zinc vacancy induced CdS/ZnS Z-scheme structure as a highly stable photocatalyst for hydrogen production

Cong Guo et al.

Summary: The CdS/ZnS hybrid composite structure is a material with excellent photocatalytic hydrogen production performance and stability, and the formation of a Z-scheme photocatalytic system is due to the presence of zinc vacancies.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

Ti3C2 MXene embellished g-C3N4 nanosheets for improving photocatalytic redox capacity

Wenzhu Liu et al.

Summary: The coupling of Ti3C2 MXenes with g-C3N4 forming the Ti3C2/g-C3N4 schottky junction demonstrates superior performance in photocatalytic nitrogen fixation and antibiotics degradation.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Engineering, Environmental

The fabrication of 1D/2D CdS nanorod@Ti3C2 MXene composites for good photocatalytic activity of hydrogen generation and ammonia synthesis

Benteng Sun et al.

Summary: The study prepared unique 1D/2D CdS nanorod@Ti3C2 MXene composites photocatalysts, achieving suitable band structure and superior electronic reduction capability of CdS to enhance photocatalytic performance. Ti3C2 MXene NSs with good electronic transfer capability prevented carrier recombination, while the multilayer structure provided more reactive sites. The CdS@Ti3C2-15 composite showed excellent photocatalytic performance, with higher AQE and long-term stability.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Shape-controlled synthesis of copper based multinary sulfide catalysts for enhanced photocatalytic hydrogen evolution

Adem Sarilmaz et al.

Summary: In this study, phase and shape controlled copper-based multinary sulfide nanorods were synthesized, with Ni doped CuxS nanorods showing the highest catalytic activity and stability for photocatalytic hydrogen evolution.

RENEWABLE ENERGY (2021)

Add to Collection

Article Chemistry, Applied

Single-atomic Pt sites anchored on defective TiO2 nanosheets as a superior photocatalyst for hydrogen evolution

Xiaolong Hu et al.

Summary: A highly active single-atomic Pt site photocatalyst was synthesized using defective TiO2 nanosheets as solid support, leading to significantly improved photocatalytic H-2 evolution performance. The Ti-Pt-Ti structure effectively stabilized the single-atomic Pt sites and facilitated the separation and transfer of photoinduced charge carriers, highlighting the benefits of a single-site catalyst for rational design of highly active and stable photocatalysts.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Article Engineering, Environmental

Insights into different dimensional MXenes for photocatalysis

Ke Zhang et al.

Summary: Introducing cocatalyst is an effective strategy to improve the photocatalytic performance of semiconductors, where novel transition metal carbides and nitrides like MXenes have emerged as a good alternative due to their high surface area and adjustable elemental composition. The performance of MXenes critically relies on their dimensions, as suggested by many theoretical and experimental studies. Understanding the current state of art of different dimensional MXenes in photocatalysis is essential for clarifying the prospects of their development.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Review Materials Science, Ceramics

From structural ceramics to 2D materials with multi-applications: A review on the development from MAX phases to MXenes

Aiguo Zhou et al.

Summary: MAX phases and MXenes are key focuses of research, with MAX phases known for their unique microstructure and properties, particularly their crack healing abilities; MXene research centers around preparation processes, microstructure, composites, and applications, with a primary focus on energy storage and electromagnetic interference shielding. New research directions and future trends on MAX phases and MXenes are also discussed.

JOURNAL OF ADVANCED CERAMICS (2021)

Add to Collection

Article Chemistry, Physical

Mo2C-MXene/CdS Heterostructures as Visible-Light Photocatalysts with an Ultrahigh Hydrogen Production Rate

Sen Jin et al.

Summary: The study introduces a visible-light photocatalyst Mo2C-MXene/CdS, which exhibits a higher H-2 production rate compared to catalysts based on noble metals or other MXenes, along with favorable electronic structures for water splitting. This heterostructure provides an efficient reaction site for the hydrogen evolution reaction, making it a promising catalyst with ultrahigh performance to replace noble-metal catalysts.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Review Engineering, Environmental

Photocatalytic water splitting for solving energy crisis: Myth, Fact or Busted?

Kim Hoong Ng et al.

Summary: Despite theoretical feasibility, photocatalytic water splitting for H-2 production is limited by low efficiency, high cost, and other technical challenges, making it an impractical pathway for solar energy harnessing at this point.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Lattice-Matched CoP/CoS2 Heterostructure Cocatalyst to Boost Photocatalytic H2 Generation

Xiaoyang Hong et al.

Summary: Transition-metal phosphides and sulfides are promising cocatalysts for HER, especially when engineered into lattice-matched heterostructures like CoP/CoS2. The optimized CoP/CoS2 cocatalyst exhibited excellent activity, highlighting the potential of heterostructure engineering for water splitting applications.

INORGANIC CHEMISTRY (2021)

Add to Collection

Article Chemistry, Physical

Oxygen vacancy stimulated direct Z-scheme of mesoporous Cu2O/TiO2 for enhanced photocatalytic hydrogen production from water and seawater

Shuhua Lv et al.

Summary: This study designed and constructed oxygen vacancy stimulated direct Z-scheme Cu2O/TiO2 hybrid photocatalysts using a Cu2+ ions adsorption-reduction strategy, with a proposed all-solid direct Z-scheme electron transport mechanism to explain their high activity and stability. The catalyst showed enhanced hydrogen evolution rate and quantum yield in both water and seawater.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

Photocatalytic H2 evolution integrated with selective amines oxidation promoted by NiS2 decorated CdS nanosheets

Junhua Zou et al.

Summary: The study focuses on immobilizing ultrafine nickel disulfide (NiS2) nanoparticles on CdS nanosheets to enhance the surface redox reactions for photocatalytic hydrogen production and imine synthesis. NiS2 exhibits unique bifunctional catalytic behavior in proton reduction and substrate activation, leading to remarkable enhanced photocatalytic performance of NiS2/CdS for simultaneous production of H-2 and imines.

JOURNAL OF CATALYSIS (2021)

Add to Collection

Article Materials Science, Ceramics

In situ reduced MXene/AuNPs composite toward enhanced charging/discharging and specific capacitance

Zixiang Zheng et al.

Summary: In this work, gold nanoparticles (AuNPs) decorated Ti3C2Tx nanosheets (MXene/AuNPs composite) were successfully fabricated through self-reduction reaction. The obtained composite exhibited uniform dispersion of 23 nm AuNPs on Ti3C2Tx nanosheets, leading to a higher specific capacitance and cyclic stability in supercapacitor applications. The composite also showed promising potential as a candidate for integrated and flexible supercapacitors.

JOURNAL OF ADVANCED CERAMICS (2021)

Add to Collection

Article Chemistry, Applied

In situ construction of protonated g-C3N4/Ti3C2 MXene Schottky heterojunctions for efficient photocatalytic hydrogen production

Haotian Xu et al.

Summary: The heterojunction photocatalyst of PCN/Ti3C2 MXene exhibits a highly improved hydrogen evolution rate, thanks to the well-defined dimensionality and perfectly matched interfaces with strong interfacial interactions. The charge-regulated surfaces of PCN and the accelerated charge transport at the face-to-face 2D/2D Schottky heterojunction interface are the main reasons for the excellent hydrogen evolution performance.

CHINESE JOURNAL OF CATALYSIS (2021)

Add to Collection

Article Chemistry, Physical

Highly efficient photocatalytic hydrogen evolution from 0D/2D heterojunction of FeP nanoparticles/CdS nanosheets

Kouhua Sun et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Bi2WO6/Nb2CTx MXene hybrid nanosheets with enhanced visible-light-driven photocatalytic activity for organic pollutants degradation

Ce Cui et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection

Article Electrochemistry

A safe etching route to synthesize highly crystalline Nb2CTx MXene for high performance asymmetric supercapacitor applications

Junpeng Xiao et al.

ELECTROCHIMICA ACTA (2020)

Add to Collection

Article Energy & Fuels

Artificial all-solid-state system by RGO bridged Cu2O and Bi2WO6 for Z-scheme H2 production and tetracycline degradation

Hongqiang Shen et al.

FUEL (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Liquid exfoliating CdS and MoS2 to construct 2D/2D MoS2/CdS heterojunctions with significantly boosted photocatalytic H2 evolution activity

Minghui Xiong et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Physical

Integrating 2D/2D CdS/α-Fe2O3 ultrathin bilayer Z-scheme heterojunction with metallic β-NiS nanosheet-based ohmic junction for efficient photocatalytic H2 evolution

Rongchen Shen et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2020)

Add to Collection

Article Energy & Fuels

Constructing a Stable 2D Layered Ti3C2 MXene Cocatalyst-Assisted TiO2/g-C3N4/Ti3C2 Heterojunction for Tailoring Photocatalytic Bireforming of Methane under Visible Light

Azmat Ali Khan et al.

ENERGY & FUELS (2020)

Add to Collection

Review Chemistry, Physical

Recent progress for hydrogen production by photocatalytic natural or simulated seawater splitting

Jining Zhang et al.

NANO RESEARCH (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Oxygen doped g-C3N4with nitrogen vacancy for enhanced photocatalytic hydrogen evolution

Hua Tang et al.

CHEMISTRY-AN ASIAN JOURNAL (2020)

Add to Collection

Article Chemistry, Physical

A Whole-Cell Inorganic-Biohybrid System Integrated by Reduced Graphene Oxide for Boosting Solar Hydrogen Production

Hongqiang Shen et al.

ACS CATALYSIS (2020)

Add to Collection

Article Energy & Fuels

2D/2D/3D architecture Z-scheme system for simultaneous H2 generation and antibiotic degradation

Hongqiang Shen et al.

FUEL (2020)

Add to Collection

Article Energy & Fuels

In Situ Fabrication of Robust Cocatalyst-Free CdS/g-C3N4 2D-2D Step-Scheme Heterojunctions for Highly Active H2 Evolution

Doudou Ren et al.

SOLAR RRL (2020)

Add to Collection

Article Chemistry, Physical

Excellent oxidation resistive MXene aqueous ink for micro-supercapacitor application

Chien-Wei Wu et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

In Situ Synthesis of CdS/Graphdiyne Heterojunction for Enhanced Photocatalytic Activity of Hydrogen Production

Jia-Xin Lv et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Physical

Ultra-efficient electromagnetic wave absorption with ethanol-thermally treated two-dimensional Nb2CTx nanosheets

Zhaoyong Jin et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Interfacial optimization of g-C3N4-based Z-scheme heterojunction toward synergistic enhancement of solar-driven photocatalytic oxygen evolution

Xiaofei Yang et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2019)

Add to Collection

Article Chemistry, Physical

Titanium-carbide MXenes for work function and interface engineering in perovskite solar cells

A. Agresti et al.

NATURE MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Ti3C2 Mxene/porous g-C3N4 interfacial Schottky junction for boosting spatial charge separation in photocatalytic H2O2 production

Yang Yang et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2019)

Add to Collection

Article Energy & Fuels

One-Step Solid-Phase Synthesis of 2D Ultrathin CdS Nanosheets for Enhanced Visible-Light Photocatalytic Hydrogen Evolution

Lei Cheng et al.

SOLAR RRL (2019)

Add to Collection

Article Materials Science, Ceramics

A hydrothermal etching route to synthesis of 2D MXene (Ti3C2, Nb2C): Enhanced exfoliation and improved adsorption performance

Chao Peng et al.

CERAMICS INTERNATIONAL (2018)

Add to Collection

Article Chemistry, Multidisciplinary

One-Step Synthesis of Nb2O5/C/Nb2C (MXene) Composites and Their Use as Photocatalysts for Hydrogen Evolution

Tongming Su et al.

CHEMSUSCHEM (2018)

Add to Collection

Review Chemistry, Multidisciplinary

CdS-Based photocatalysts

Lei Cheng et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Add to Collection

Article Chemistry, Physical

A 2D/1D TiO2 nanosheet/CdS nanorods heterostructure with enhanced photocatalytic water splitting performance for H-2 evolution

Junmei Wang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Effect of mixed surface terminations on the structural and electrochemical properties of two-dimensional Ti3C2T2 and V2CT2 MXenes multilayers

Nuala M. Caffrey

NANOSCALE (2018)

Add to Collection

Article Chemistry, Physical

Ultrathin CdS nanosheets with tunable thickness and efficient photocatalytic hydrogen generation

Chuanbiao Bie et al.

APPLIED SURFACE SCIENCE (2018)

Add to Collection

Article Multidisciplinary Sciences

Ti3C2 MXene co-catalyst on metal sulfide photo-absorbers for enhanced visible-light photocatalytic hydrogen production

Jingrun Ran et al.

NATURE COMMUNICATIONS (2017)

Add to Collection

Article Chemistry, Physical

High Efficiency Photocatalytic Water Splitting Using 2D α-Fe2O3/g-C3N4 Z-Scheme Catalysts

Xiaojie She et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Titania Composites with 2D Transition Metal Carbides as Photocatalysts for Hydrogen Production under Visible-Light Irradiation

Hui Wang et al.

CHEMSUSCHEM (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Schottky-Barrier-Free Contacts with Two-Dimensional Semiconductors by Surface-Engineered MXenes

Yuanyue Liu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Add to Collection

Article Multidisciplinary Sciences

Metal-free efficient photocatalyst for stable visible water splitting via a two-electron pathway

Juan Liu et al.

SCIENCE (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Photogenerated Charge Carriers and Reactive Oxygen Species in ZnO/Au Hybrid Nanostructures with Enhanced Photocatalytic and Antibacterial Activity

Weiwei He et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

Add to Collection

Article Chemistry, Multidisciplinary

New Two-Dimensional Niobium and Vanadium Carbides as Promising Materials for Li-Ion Batteries

Michael Naguib et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Two-Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2

Michael Naguib et al.

ADVANCED MATERIALS (2011)

Add to Collection

© Peeref 2019-2024. All rights reserved.