4.6 Article

Simulation of Tensile Strength for Halloysite Nanotube-Filled System

Related references

Note: Only part of the references are listed.
Article Materials Science, Composites

Comparison of mechanical properties and thermal stability of graphene-based materials and halloysite nanotubes reinforced maleated polymer compatibilized polypropylene nanocomposites

Obinna Emmanuel Ezenkwa et al.

Summary: This study compared the reinforcing effects of different nanofillers in polypropylene nanocomposites. Graphene nanoplatelets showed the best mechanical properties and thermal stability, graphene oxide improved bending properties, and halloysite nanotubes exhibited good ductility.

POLYMER COMPOSITES (2022)

Article Materials Science, Multidisciplinary

Preparation of intelligent magnetic halloysite nanotubes/polyurethane nanocomposites: The role of nanotube modification on the shape recovery rate

Fatemeh Mohammadzadeh et al.

Summary: This study investigated the effect of adding modified halloysite nanotubes (HNTs) and iron oxide-functionalized halloysite nanotubes (I-HNTs) on the morphology and thermomechanical properties of polyurethane with shape memory behavior. The results showed that the addition of HNTs or I-HNTs increased phase separation and improved the shape recovery speed and shape stability of polyurethane in shape memory behavior.

MATERIALS RESEARCH BULLETIN (2022)

Article Chemistry, Multidisciplinary

Osteogenesis capability of three-dimensionally printed poly(lactic acid)-halloysite nanotube scaffolds containing strontium ranelate

Seyyed Behnam Abdollahi Boraei et al.

Summary: This study investigates the 3D printing of scaffolds containing halloysite nanotubes and strontium ranelate as a carrier for bone regeneration. The results show that the addition of strontium ranelate improves the morphological, biological, and in vitro release properties of the scaffolds.

NANOTECHNOLOGY REVIEWS (2022)

Article Materials Science, Composites

Preparation of polyurethane composites reinforced with halloysite and carbon nanotubes

Mohammadali Pourmohammadi-Mahunaki et al.

Summary: Polyurethane composites were synthesized with varying amounts of carbon nanotubes (CNT) and CNT-halloysite (HNT) hybrids, leading to improvements in elastic modulus, tensile strength, and hardness. However, the incorporation of CNT-HNT hybrids may reduce tensile strength and decrease phase separation and melting points.

POLYMER COMPOSITES (2021)

Article Multidisciplinary Sciences

Plasma Hsp90 levels in patients with systemic sclerosis and relation to lung and skin involvement: a cross-sectional and longitudinal study

Hana Storkanova et al.

Summary: According to the study, plasma levels of Hsp90 are increased in patients with systemic sclerosis compared to healthy controls, and are associated with increased inflammatory activity, worsened lung function, and extent of skin involvement in patients with diffuse cutaneous systemic sclerosis. In patients with systemic sclerosis-associated interstitial lung disease treated with cyclophosphamide, baseline Hsp90 levels can predict changes in DLCO over 12 months of therapy.

SCIENTIFIC REPORTS (2021)

Article Materials Science, Composites

Hybridization as an efficient strategy for enhancing the performance of polymer nanocomposites

Ali Tajdari et al.

Summary: This study aimed to compare the effects of different modes of metal oxide addition on the properties of poly(lactic acid) (PLA), synthesizing zinc oxide nanorods and hybrid nanoparticles and incorporating them into PLA matrices. The results showed that proper dispersion and lowest aggregation were achieved with the TZO nano-hybrid, leading to improved physical, mechanical, and antibacterial properties of PLA. This novel nanocomposite film has potential applications in the packaging industry.

POLYMER COMPOSITES (2021)

Article Polymer Science

Interface and Interphase in Polymer Nanocomposites with Bare and Core-Shell Gold Nanoparticles

Albert J. Power et al.

Summary: Metal nanoparticles are used to modify the properties of polymer matrix in bio-nanotechnology. The properties of polymer/gold nanoparticle nanocomposites are studied through molecular dynamics simulations, revealing the dependence of interface size on different properties and changes in behavior caused by anchored polymeric chains.

POLYMERS (2021)

Article Chemistry, Physical

Comparative cytotoxicity of kaolinite, halloysite, multiwalled carbon nanotubes and graphene oxide

Elvira Rozhina et al.

Summary: This study compared the interactions of carbon nanomaterials and nanoclays with human lung adenocarcinoma cells, finding that carbon nanomaterials were more toxic and genotoxic to cells. The shape of the nanomaterials did not significantly affect their internalization and cytotoxicity.

APPLIED CLAY SCIENCE (2021)

Article Materials Science, Composites

Thermoplastic polyurethane/multiwalled carbon nanotubes nanocomposites: Effect of nanoparticle content, shear, and thermal processing

Arman Farzaneh et al.

Summary: Nanocomposites of thermoplastic polyurethane and multiwalled carbon nanotubes were prepared with varying nanofiller content, and the influence of nanofiller content on physical properties was studied. The results showed that an increase in nanofiller content led to increased phase separation degree and electrical conductivity.

POLYMER COMPOSITES (2021)

Article Chemistry, Physical

Effects of halloysite content on the thermo-mechanical performances of composite bioplastics

Lorenzo Lisuzzo et al.

APPLIED CLAY SCIENCE (2020)

Article Biophysics

Effect of SrR delivery in the biomarkers of bone regeneration during the in vitro degradation of HNT/GN coatings prepared by EPD

Seyyed Behnam Abdollahi Boraei et al.

COLLOIDS AND SURFACES B-BIOINTERFACES (2020)

Article Polymer Science

Ethylene vinyl acetate copolymer/halloysite nanotubes nanocomposites with enhanced mechanical and thermal properties

Agata Zubkiewicz et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2020)

Article Chemistry, Multidisciplinary

Halloysite nanotubes in polymer science: purification, characterization, modification and applications

Cong Cheng et al.

NANOTECHNOLOGY REVIEWS (2020)

Article Materials Science, Composites

Effects of interphase regions and filler networks on the viscosity of PLA/PEO/carbon nanotubes biosensor

Yasser Zare et al.

POLYMER COMPOSITES (2019)

Article Engineering, Multidisciplinary

Creep performance of CNT polymer nanocomposites -An emphasis on viscoelastic interphase and CNT agglomeration

Mohammad Kazem Hassanzadeh-Aghdam et al.

COMPOSITES PART B-ENGINEERING (2019)

Article Chemistry, Multidisciplinary

A modeling methodology to investigate the effect of interfacial adhesion on the yield strength of MMT reinforced nanocomposites

Yasser Zare et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2019)

Article Materials Science, Multidisciplinary

Modeling the roles of carbon nanotubes and interphase dimensions in the conductivity of nanocomposites

Yasser Zare et al.

RESULTS IN PHYSICS (2019)

Article Materials Science, Multidisciplinary

Morphology correlated investigation on mechanical and dielectric properties of plasticized poly vinyl chloride/MWCNT nanocomposites

Elizabeth Francis et al.

FUNCTIONAL COMPOSITES AND STRUCTURES (2019)

Article Materials Science, Composites

Identifying interphase properties in polymer nanocomposites using adaptive optimization

Yixing Wang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

Article Engineering, Manufacturing

Effect of aspect ratio on thermal conductivity of high density polyethylene/multi-walled carbon nanotubes nanocomposites

Tuba Evgin et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

Article Materials Science, Multidisciplinary

Study on interfacial properties in polymer blend ternary nanocomposites: Role of nanofiller content

Yasser Zare

COMPUTATIONAL MATERIALS SCIENCE (2016)

Article Chemistry, Physical

Modeling approach for tensile strength of interphase layers in polymer nanocomposites

Yasser Zare

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2016)

Article Materials Science, Multidisciplinary

An extended micromechanics method for probing interphase properties in polymer nanocomposites

Zeliang Liu et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2016)

Article Materials Science, Multidisciplinary

From the Volume-Filling Effect to the Stress-Bearing Network: The Reinforcement Mechanisms of Carbon Black Filler in Natural Rubber

Liang Chen et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2016)

Article Engineering, Multidisciplinary

A developed model to assume the interphase properties in a ternary polymer nanocomposite reinforced with two nanofillers

Yasser Zare et al.

COMPOSITES PART B-ENGINEERING (2015)

Article Materials Science, Multidisciplinary

Modeling of tensile modulus in polymer/carbon nanotubes (CNT) nanocomposites

Yasser Zare

SYNTHETIC METALS (2015)

Article Materials Science, Multidisciplinary

An analysis of interfacial adhesion in nanocomposites from recycled polymers

Yasser Zare et al.

COMPUTATIONAL MATERIALS SCIENCE (2014)

Article Engineering, Manufacturing

Micromechanics modeling of the electrical conductivity of carbon nanotube (CNT)-polymer nanocomposites

Chuang Feng et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)

Article Biochemistry & Molecular Biology

Development of regenerated cellulose/halloysite nanotube bionanocomposite films with ionic liquid

Mohammad Soheilmoghaddam et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2013)

Article Polymer Science

Thermal, mechanical, and rheological properties of poly(ε-caprolactone)/halloysite nanotube nanocomposites

Kang-Suk Lee et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2013)

Article Engineering, Chemical

Micromechanical models for carbon nanotube and cellulose nanowhisker reinforced composites

M. R. Loos et al.

POLYMER ENGINEERING AND SCIENCE (2013)

Article Chemistry, Applied

Modified natural halloysite/potato starch composite films

Yongqiang He et al.

CARBOHYDRATE POLYMERS (2012)

Article Polymer Science

Nonisothermal crystallization and melting behavior of PP/nanoclay/CaCO3 ternary nanocomposite

Yasser Zare et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2012)

Article Polymer Science

Estimation of interphase thickness and properties in PP/layered silicate nanocomposites

Zita Dominkovics et al.

EUROPEAN POLYMER JOURNAL (2011)

Review Polymer Science

Newly emerging applications of halloysite nanotubes: a review

Mingliang Du et al.

POLYMER INTERNATIONAL (2010)

Article Materials Science, Composites

Simulation of interphase percolation and gradients in polymer nanocomposites

Rui Qiao et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2009)

Review Chemistry, Physical

Halloysite clay minerals - A review

E Joussein et al.

CLAY MINERALS (2005)