☆ 4.5 Article

NaBF4-dimethyl sulfoxide/NaCl-H2O biphasic electrolytes for magnesium-air batteries

IONICS (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Na2SnO3 functions as outstanding magnesium alloy passivator by synergistic effect with trace carboxymethyl chitosan for Mg-air batteries for standby protection

Liangyuan Chen et al.

Summary: The study indicates that Na2SnO3 acts as a passivation inhibitor, CMCS acts as a cathodic type inhibitor, and the addition of mixed inhibitors can enhance the corrosion inhibition effect on the AZ61 alloy while maintaining high performance during discharge.

NEW JOURNAL OF CHEMISTRY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of homogenization treatment on corrosion behavior and discharge performance of the Mg-2Zn-1Ca anodes for primary Mg-air batteries

Changwei Gong et al.

Summary: The effects of different homogenization treatments on the corrosion and discharge performance of Mg-2Zn-1Ca alloy were investigated. The results showed that homogenization treatment reduced the corrosion rate and improved the discharge performance of the alloy.

MATERIALS CHEMISTRY AND PHYSICS (2022)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Study on the electrochemical behavior of Mg and Al ions in LiCl-KCl melt and preparation of Mg-Al alloy

Shaolong Li et al.

Summary: The electrochemical behavior of Mg2+ and Al3+ in LiCl-KCl melt was studied, and it was found that their reductions were reversible processes controlled by the rate of mass transfer. The presence of one ion did not significantly affect the reduction potential of the other ion. The equilibrium potentials and apparent standard potentials were determined, and the deposits obtained from electrolysis showed segregation of Al at grain boundaries.

JOURNAL OF MAGNESIUM AND ALLOYS (2022)

Add to Collection

Article Chemistry, Physical

Low-cost hydrocarbon membrane enables commercial-scale flow batteries for long-duration energy storage

Zhizhang Yuan et al.

Summary: This study demonstrates the pilot-scale synthesis and roll-to-roll manufacturing of sulfonated poly(ether ether ketone) (SPEEK) membranes and their successful integration in kilowatt-scale alkaline-based flow batteries. The membranes exhibit high hydroxide conductivity, chemical stability, and long-term stable operation. The use of these low-cost hydrocarbon membranes also leads to substantial cost savings compared to traditional Nafion membranes, suggesting a potential pathway for future cost-effective flow batteries for grid energy storage.

JOULE (2022)

Add to Collection

Article Chemistry, Physical

Hydrogen-bond network manipulation of aqueous electrolytes with high-donor solvent additives for Al-air batteries

Tao Wang et al.

Summary: Manipulating the hydrogen-bond network of aqueous electrolyte through solvents can suppress the unwanted parasitic hydrogen evolution reaction, leading to improved energy density of batteries.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Hypoeutectic Mg-Zn binary alloys as anode materials for magnesium-air batteries

Fanglei Tong et al.

Summary: Zn has high solid solubility in Mg and can improve the performance of Mg alloys. The addition of 2wt% Zn enhances anodic efficiency and specific capacity, while 6wt% and 15wt% Zn reduce the discharge properties.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Achieving Ultrahigh Anodic Efficiency via Single-Phase Design of Mg-Zn Alloy Anode for Mg-Air Batteries

Bo Xiao et al.

Summary: Magnesium-air battery with a novel Mg64Zn36 alloy anode has achieved a high discharge specific capacity and outstanding efficiency, breaking efficiency records among reported Mg anodes. The high efficiency is attributed to inhibiting hydrogen evolution by Zn alloying, passivating the Mg matrix, and converting intermediate ion Mg+ electrochemically. Uniform discharging products due to the homogeneous microstructure of Mg64Zn36 also contribute to the high efficiency. This design may open a new avenue for the development of Mg-air batteries.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Mg(ClO4)2-N,N-Dimethylformamide (Acetonitrile)/NaCl Double Electrolytes for Magnesium-Air Batteries

Jingling Ma et al.

Summary: The use of double solution in magnesium-air batteries can limit corrosion and improve performance, with organic electrolytes enhancing the utilization rate of magnesium anode and salt solution on the air cathode side increasing discharge voltage.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)

Add to Collection

Article Chemistry, Physical

An overview and prospective on Al and Al-ion battery technologies

Giuseppe Antonio Elia et al.

Summary: Aluminum batteries have high charge storage capacity and low redox potential, with a variety of electrolyte chemistry options available, classified into aqueous and non-aqueous types.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Chemistry, Physical

Discharge performance of extruded Mg-Bi binary alloys as anodes for primary Mg-air batteries

Yu-hang Chen et al.

Summary: The study systematically evaluated the microstructural characteristic, electrochemical behavior, and discharge performance of extruded Mg-xBi (x = 0.5, 1.0 and 2.0 wt%) anodes. It was found that the Mg-0.5Bi anode showed better discharge activity and stability compared to other compositions, making it a promising anode material for Mg-air battery applications.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Electrochemistry

Regulating discharge performance of Mg anode in primary Mg-air battery by complexing agents

Yuxin Zhou et al.

Summary: Adding complexing agents can improve the discharge performance of Mg-air batteries, with strong Mg2+ complexing agents significantly lowering the discharge potential of Mg anode, while complexing agents with low stability constant can improve the utilization efficiency of the anode.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Chemistry, Physical

Microgalvanic Corrosion of Mg-Ca and Mg-Al-Ca Alloys in NaCl and Na2SO4 Solutions

Peixu Yang et al.

Summary: The study found that the Mg2Ca phase acts as a microanode in microgalvanic corrosion in both NaCl and Na2SO4 solutions, accelerating corrosion of the adjacent Mg matrix, while Cl- and SO42- have different sensibilities to microgalvanic corrosion.

MATERIALS (2021)

Add to Collection

Article Electrochemistry

Dual-electrolyte aluminum/air microfluidic fuel cell with electrolyte-recirculation

Lei Wang et al.

Summary: The Aluminum/air microfluidic fuel cell combines the advantages of co-laminar MFC and aluminum/air batteries, making it a promising device for powering numerous nodes in the Internet of Things ecosystems with high energy density, low cost, membraneless, and miniaturized design. The recirculating dual-electrolyte design in the cell exhibits outstanding performance with an open-circuit voltage of 2.2 V and a short-current density of 1 A cm(-2), benefiting from the regular hierarchical porous carbon paper separator that minimizes electrolyte mixing and facilitates recirculation. This work provides an alternative route for cost-effective and high-performance aluminum/air MFCs towards real applications.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Chemistry, Physical

Electrochemical behaviors and discharge properties of Al-Mg-Sn-Ca alloys as anodes for Al-air batteries

Zibin Wu et al.

Summary: The study found that adding appropriate amount of calcium to the Al-0.5Mg-0.1Sn alloy can generate CaxSny phases or Al4Ca phases in the matrix, further refining grains, improving discharge activity, and reducing self-corrosion rate. Among the alloys tested, Al-0.5Mg-0.1Sn-0.1Ca exhibited the best performance, showing potential as a promising anode material for Al-air batteries.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Chemistry, Physical

Revisiting the degradation of solid/electrolyte interfaces of magnesium metal anodes: Decisive role of interfacial composition

Huanglin Dou et al.

Summary: The study revealed that the native SEI is dominated by organic components and designed a model system with controllable electronically insulating SEI by increasing the inorganic component, showing that the interfacial electronic property and composition is decisive to the degradation of Mg metal anodes. The initial organic-rich SEI hinders ion transport by undergoing continuous cracking/reformation and electronic leakage, leading to continuous proliferation during operation process.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Understanding the discharge behavior of an ultra-high-purity Mg anode for Mg-air primary batteries

Xingrui Chen et al.

Summary: This study used experiments and modeling methods to identify that charge transfer resistance is the main internal anodic resistance for ultra-high-purity (UHP) Mg discharge in Mg-air primary batteries, and the drop in anodic efficiency is caused by the anodic hydrogen reaction. In addition, it was observed that UHP Mg has a strong preferred dissolution orientation during discharge at low current densities.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Chemistry, Multidisciplinary

An artificial hybrid interphase for an ultrahigh-rate and practical lithium metal anode

Anjun Hu et al.

Summary: An artificial hybrid SEI layer composed of lithium-antimony alloy and lithium fluoride was constructed to reduce electron tunneling between the Li anode and SEI, resulting in uniform Li deposition and stable Li plating/stripping behaviors at an ultrahigh rate. This work uncovers the internal mechanism of Li+ transport within the SEI component, providing a pathway to stabilize the Li anode under practical high-rate conditions.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Inhibition effect and mechanism of inorganic-organic hybrid additives on three-dimension porous aluminum foam in alkaline Al-air battery

Hao Jiang et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Chemistry, Physical

Tailoring electrolyte additives for controlled Mg-Ca anode activity in aqueous Mg-air batteries

Linqian Wang et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

A corrosion resistant die-cast Mg-9Al-1Zn anode with superior discharge performance for Mg-air battery

Bo Xiao et al.

MATERIALS & DESIGN (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Aluminum electrolytes for Al dual-ion batteries

Kostiantyn V. Kravchyk et al.

COMMUNICATIONS CHEMISTRY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Solvation Structure Design for Aqueous Zn Metal Batteries

Longsheng Cao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Add to Collection

Article Polymer Science

Novel nanofiber-enhanced SPEEK proton-exchange membranes with high conductivity and stability

Xuehua Zhou et al.

POLYMER (2020)

Add to Collection

Article Chemistry, Physical

Electrochemical performance of Mg-air batteries based on AZ series magnesium alloys

Jingling Ma et al.

IONICS (2019)

Add to Collection

Article Polymer Science

Effect of Sulfonation Degree and PVDF Content on the Structure and Transport Properties of SPEEK/PVDF Blend Membranes

Shaojian He et al.

POLYMERS (2019)

Add to Collection

Article Chemistry, Physical

An embedded heterostructure Fe2O3@α-FeOOH/RGO with optimized SEI film and fast Li-ion diffusion

Meng Ma et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Chemistry, Physical

Properties of reduced graphene oxide for Mg-air battery

Jingling Ma et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Chemistry, Physical

Wrought Mg-Al-Pb-RE alloy strips as the anodes for Mg-air batteries

Naiguang Wang et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Chemistry, Physical

The understanding of solid electrolyte interface (SEI) formation and mechanism as the effect of flouro-o-phenylenedimaleimaide (F-MI) additive on lithium-ion battery

Nur Laila Hamidah et al.

SURFACE AND INTERFACE ANALYSIS (2019)

Add to Collection

Article Chemistry, Physical

A C-coated and Sb-doped SnO2 nanocompsite with high surface area and low charge transfer resistance as ultrahigh capacity lithium ion battery anode

Qiang Zhang et al.

MATERIALS TODAY ENERGY (2019)

Add to Collection

Article Electrochemistry

Electrochemical Performance of 1-Ethyl-3-Methylimidazolium Bis(Trifluoromethylsulfonyl)Imide Ionic Liquid as Electrolyte for Primary Mg-Air Batteries

Jingli Zhang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Add to Collection

Article Chemistry, Physical

Stabilizing a sodium-metal battery with the synergy effects of a sodiophilic matrix and fluorine-rich interface

Qidi Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of Sodium Silicate/Sodium Alginate Additives on Discharge Performance of Mg-Air Battery Based on AZ61 Alloy

Jingling Ma et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)

Add to Collection

Article Chemistry, Physical

Mg-Ca binary alloys as anodes for primary Mg-air batteries

Min Deng et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Article Construction & Building Technology

Reinforced Masonry Building Seismic Response Models for ASCE/SEI-41

Mohamed Ezzeldin et al.

JOURNAL OF STRUCTURAL ENGINEERING (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of phosphate and vanadate as electrolyte additives on the performance of Mg-air batteries

Yanchun Zhao et al.

MATERIALS CHEMISTRY AND PHYSICS (2018)

Add to Collection

Article Construction & Building Technology

Reinforced Masonry Building Seismic Response Models for ASCE/SEI-41

Mohamed Ezzeldin et al.

JOURNAL OF STRUCTURAL ENGINEERING (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Composition optimization and electrochemical properties of Mg-Al-Sn-Mn alloy anode for Mg-air batteries

Tianxu Zheng et al.

MATERIALS & DESIGN (2018)

Add to Collection

Article Nanoscience & Nanotechnology

β-Sn Nanorods with Active (001) Tip Induced LiF-Rich SEI Layer for Stable Anode Material in Lithium Ion Battery

Lyn Marie Z. De Juan et al.

ACS APPLIED NANO MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Graphene-based carbon coated tin oxide as a lithium ion battery anode material with high performance

Qiang Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Chemistry, Physical

Double liquid electrolyte for primary Mg batteries

Junlin Du et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection

© Peeref 2019-2024. All rights reserved.