Related references
Note: Only part of the references are listed.High temperature oxidation and room temperature axial strength of pre-oxidized zircaloy-4 cladding after a simulated LOCA
Jean Desquines et al.
JOURNAL OF NUCLEAR MATERIALS (2021)
Thermomechanical model for solidification and cooling simulation of Ni-based superalloy components
C. Labergere et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2021)
Formulation and implementation of strain rate-dependent fracture toughness in context of the phase-field method
Bo Yin et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2020)
A framework to model the fatigue behavior of brittle materials based on a variational phase-field approach
P. Carrara et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)
A phase-field investigation of the effect of grain-boundary diffusion on austenite to ferrite transformation
Avisor Bhattacharya et al.
COMPUTATIONAL MATERIALS SCIENCE (2020)
An open-source Abaqus implementation of the phase-field method to study the effect of plasticity on the instantaneous fracture toughness in dynamic crack propagation
Gergely Molnar et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)
Phase field simulation for fracture behavior of hyperelastic material at large deformation based on edge-based smoothed finite element method
Fan Peng et al.
ENGINEERING FRACTURE MECHANICS (2020)
Toughness or strength? Regularization in phase-field fracture explained by the coupled criterion
Gergely Molnar et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)
A length scale insensitive anisotropic phase field fracture model for hyperelastic composites
Tushar Kanti Mandal et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Phase field fracture in elasto-plastic solids: Abaqus implementation and case studies
Jianguang Fang et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)
Hyperelastic phase-field fracture mechanics modeling of the toughening induced by Bouligand structures in natural materials
Sheng Yin et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2019)
A phase-field model for fatigue crack growth
Yu-Sheng Lo et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2019)
Phase-field models for fatigue crack growth
A. Mesgarnejad et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)
A coupled phase field/diffusional/mechanical framework for simulation of upper and lower bainitic transformation
Martin Duesing et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2019)
Contribution to the understanding of brittle fracture conditions of zirconium alloy fuel cladding tubes during LOCA transient
Ronan Thieurmel et al.
JOURNAL OF NUCLEAR MATERIALS (2019)
A phase field method for modeling anodic dissolution induced stress corrosion crack propagation
T-T. Nguyen et al.
CORROSION SCIENCE (2018)
An approach to study oxidation-induced stresses in Zr alloys oxidized at high temperature
M. Le Saux et al.
CORROSION SCIENCE (2018)
Ductile damage modelling with locking-free regularised GTN model
Yi Zhang et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2018)
Elasto-plastic phase field modelling of oxidation of zirconium alloys
Yunong Zhao et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2018)
Effect of pre-oxide and hydrogen on creep of Zircaloy-4 at 1123 K
C. Dominguez
JOURNAL OF NUCLEAR MATERIALS (2018)
2D and 3D Abaqus implementation of a robust staggered phase-field solution for modeling brittle fracture
Gergely Molnar et al.
FINITE ELEMENTS IN ANALYSIS AND DESIGN (2017)
Quasi-static and high strain rate fracture behaviour of Ti6Al4V
P. Verleysen et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2017)
A phase field method for modeling stress corrosion crack propagation in a nickel base alloy
Thanh-Tung Nguyen et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2017)
Identification of the steady-state creep behavior of Zircaloy-4 claddings under simulated Loss-Of-Coolant Accident conditions based on a coupled experimental/numerical approach
D. Campello et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2017)
A Phase Field Model for Rate-Dependent Ductile Fracture
Hojjat Badnava et al.
METALS (2017)
A phase-field model for chemo-mechanical induced fracture in lithium-ion battery electrode particles
C. Miehe et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2016)
A phase field model for damage in elasto-viscoplastic materials
P. Shanthraj et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2016)
Phase-field modeling of crack propagation in multiphase systems
Daniel Schneider et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2016)
A fracture-controlled path-following technique for phase-field modeling of brittle fracture
N. Singh et al.
FINITE ELEMENTS IN ANALYSIS AND DESIGN (2016)
Phase field modeling of ductile fracture at finite strains: A variational gradient-extended plasticity-damage theory
Christian Miehe et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Homogenization of viscoplastic constitutive laws within a phase field approach
Victor de Rancourt et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2016)
Creep flow and fracture behavior of the oxygen-enriched alpha phase in zirconium alloys
R. Chosson et al.
SCRIPTA MATERIALIA (2016)
Phase-field modeling of ductile fracture
M. Ambati et al.
COMPUTATIONAL MECHANICS (2015)
A phase-field/gradient damage model for brittle fracture in elastic-plastic solids
Fernando P. Duda et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
A review on phase-field models of brittle fracture and a new fast hybrid formulation
Marreddy Ambati et al.
COMPUTATIONAL MECHANICS (2015)
A novel homogenization method for phase field approaches based on partial rank-one relaxation
J. Mosler et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2014)
Modelling inheritance of plastic deformation during migration of phase boundaries using a phase field method
Kais Ammar et al.
MECCANICA (2014)
Modeling dendritic solidification of Al-3%Cu using cellular automaton and phase-field methods
Mohsen Asle Zaeem et al.
APPLIED MATHEMATICAL MODELLING (2013)
Evaluation of interfacial excess contributions in different phase-field models for elastically inhomogeneous systems
A. Durga et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2013)
Damage growth modeling using the Thick Level Set (TLS) approach: Efficient discretization for quasi-static loadings
P. E. Bernard et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2012)
A phase field model incorporating strain gradient viscoplasticity: Application to rafting in Ni-base superalloys
M. Cottura et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2012)
A level set based model for damage growth: The thick level set approach
N. Moes et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2011)
Stabilized global-local X-FEM for 3D non-planar frictional crack using relevant meshes
A. Gravouil et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2011)
A phase field model for rate-independent crack propagation: Robust algorithmic implementation based on operator splits
Christian Miehe et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2010)
Ostwald Ripening in Nanoalloys: When Thermodynamics Drives a Size-Dependent Particle Composition
D. Alloyeau et al.
PHYSICAL REVIEW LETTERS (2010)
Quantitative analysis of grain boundary properties in a generalized phase field model for grain growth in anisotropic systems
N. Moelans et al.
PHYSICAL REVIEW B (2008)
The phase field technique for modeling multiphase materials
I. Singer-Loginova et al.
REPORTS ON PROGRESS IN PHYSICS (2008)
Three-dimensional phase field simulation of the effect of anisotropy in grain-boundary mobility on growth kinetics and morphology of grain structure
Yoshihiro Suwa et al.
COMPUTATIONAL MATERIALS SCIENCE (2007)
On the growth strain origin and stress evolution prediction during oxidation of metals
B. Panicaud et al.
APPLIED SURFACE SCIENCE (2006)
Appropriate extended functions for X-FEM simulation of plastic fracture mechanics
T Elguedj et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2006)
An energy-conserving scheme for dynamic crack growth using the eXtended finite element method
J Réthoré et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2005)
Dynamic crack propagation with cohesive elements: a methodology to address mesh dependency
F Zhou et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2004)
Quantitative phase-field model of alloy solidification
B Echebarria et al.
PHYSICAL REVIEW E (2004)
Ostwald ripening and related phenomena
A Kabalnov
JOURNAL OF DISPERSION SCIENCE AND TECHNOLOGY (2001)
A study of the coarsening in tin/lead solders
W Dreyer et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2000)
Numerical experiments in revisited brittle fracture
B Bourdin et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2000)