☆ 4.4 Article

Investigation of Mechanical Characterization, Thermal Behavior and Dielectric Properties on Al7075-TiB2 MMC Fabricated Using Stir Casting Route

INTERNATIONAL JOURNAL OF METALCASTING (2023)

Related references

Note: Only part of the references are listed.

Article Metallurgy & Metallurgical Engineering

Investigations on Mechanical Properties of Micro- and Nano-Particulates (Al2 O3/B4C) Reinforced in Al 7075 Matrix Composite

G. Kumaresan et al.

Summary: This study aimed to investigate the enhancement of mechanical properties in composites by adding micro- and nanoparticles to the aluminium matrix. The research found that the reinforcement of nanoparticles significantly improved the mechanical properties compared to micro-particles, due to their high surface energy.

INTERNATIONAL JOURNAL OF METALCASTING (2022)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effect of TiB2 Particles on the Morphological, Mechanical and Corrosion Behaviour of Al7075 Metal Matrix Composite Produced Using Stir Casting Process

M. Manoj et al.

Summary: This study focused on investigating the morphological, mechanical, and corrosion behavior of Al7075-TiB2 metal matrix composites. The addition of TiB2 particles through stir casting process improved the tensile strength and micro hardness of the composites, while reducing the wear rate. Electrochemical potentiodynamic polarization and salt spray tests confirmed the enhanced corrosion resistance of the Al-TiB2 composites.

INTERNATIONAL JOURNAL OF METALCASTING (2022)

Add to Collection

Article Metallurgy & Metallurgical Engineering

The Effect of Fe Content on the Solidification Pathway, Microstructure and Thermal Conductivity of Hypoeutectic Al-Si Alloys

Junqi Gan et al.

Summary: The present study systematically investigated the solidification pathway, microstructure, and thermal conductivity of Fe-rich Al-x Si alloys. It was found that the thermal conductivity initially improved and then decreased with increasing Fe content, with the rate depending on the Si content. The addition of Fe led to the precipitation of different phases, which had varying effects on thermal conductivity.

INTERNATIONAL JOURNAL OF METALCASTING (2022)

Add to Collection

Article Chemistry, Physical

Tribological Behaviour of Al8090-SiC Metal Matrix Composites with Dissimilar B4C Addition

Leo Bright R. Singh et al.

Summary: In this study, a hybrid composite was prepared using the double stir casting method. The density, hardness, and wear behavior of the fabricated composite were measured. Characterization testing revealed the performance of the composite material.

SILICON (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Scandium in Al-Sc and Al-Sc-Zr Alloys Under Precipitation Strengthening Mechanism at 350 °C Aging

Xue Na et al.

Summary: The study focused on the micro hardness and micro structure of Al-Sc alloy and Al-Sc-Zr alloy with different scandium percentages. It was observed that there was only slight difference in hardness during the initial aging stage of the developed alloys, while the Al-Sc-Zr alloy maintained peak hardness for a longer period, showing better thermal stability. Analysis also indicated the inhibition of precipitate growth through precipitation of Zr in the initial aging stage. TEM results revealed the formation of two different sized precipitates in the Al-Sc-Zr alloy after reaching peak hardness.

METALS AND MATERIALS INTERNATIONAL (2021)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Comparative Evaluation of Ex Situ and In Situ Method of Fabricating Aluminum/TiB2 Composites

V. S. Ayar et al.

Summary: The present study investigated the fabrication of Al-TiB2 composites using in situ and ex situ methods, focusing on the effect of processing temperature on the formation of titanium diboride particles. Comparative evaluation of the two methods was conducted, along with an analysis of various process parameters on mechanical properties. The results indicated that in situ composites exhibited a more homogeneous distribution of particles and higher mechanical properties compared to ex situ composites.

INTERNATIONAL JOURNAL OF METALCASTING (2021)

Add to Collection

Article Materials Science, Composites

Characterization of physical and mechanical properties of aluminium based composites reinforced with titanium diboride particulates

Dipankar Dey et al.

Summary: This study investigated the effect of titanium diboride addition on physical and mechanical properties of Al2024-TiB2 composites manufactured using stir casting route. The results showed that an increase in TiB2 content resulted in improved hardness and tensile strength of the composites, with a significant enhancement in Al2024-9% TiB2 composite. SEM analysis revealed a different fracture mode between reinforced and unreinforced materials.

JOURNAL OF COMPOSITE MATERIALS (2021)

Add to Collection

Article Engineering, Manufacturing

Surface quality measures analysis and optimization on machining titanium alloy using CO2 based laser beam drilling process

T. Muthuramalingam et al.

Summary: Laser power plays a significant role in determining surface quality measures, and optimizing process parameters can reduce plasma energy and improve machining accuracy.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Development and Characterization of In Situ AlSi5Cu3/TiB2 Composites

V. S. Ayar et al.

INTERNATIONAL JOURNAL OF METALCASTING (2020)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effect of TiB2 on the Corrosion Resistance Behavior of In Situ Al Composites

P. Senthil Kumar et al.

INTERNATIONAL JOURNAL OF METALCASTING (2020)

Add to Collection

Article Chemistry, Physical

Experimental study of ZrB2-Si3N4 on the microstructure, mechanical and electrical properties of high grade AA8011 metal matrix composites

J. Fayomi et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Engineering, Multidisciplinary

Effect of B4C and MOS2 reinforcement on micro structure and wear properties of aluminum hybrid composite for automotive applications

Shoufa Liu et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Thermal Analysis and Production of As-Cast Al 7075/6060 Bilayer Billets

Thomas Gress et al.

INTERNATIONAL JOURNAL OF METALCASTING (2019)

Add to Collection

Article Chemistry, Physical

Effects of Silicon Carbide and Tungsten Carbide in Aluminium Metal Matrix Composites

Cao Fenghong et al.

SILICON (2019)

Add to Collection

Article Chemistry, Physical

Multi Response Optimization of AWJM Process Parameters on Machining TiB2 Particles Reinforced Al7075 Composite Using Taguchi-DEAR Methodology

M. Manoj et al.

SILICON (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Analysis of surface performance measures on WEDM processed titanium alloy with coated electrodes

T. Muthuramalingam et al.

MATERIALS RESEARCH EXPRESS (2018)

Add to Collection

Article Engineering, Mechanical

High-Temperature Tribology of AA5052/ZrB2 PAMCs

Narendra Kumar et al.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2017)

Add to Collection

Proceedings Paper Energy & Fuels

Thermal analysis on Al7075/Al2O3 metal matrix composites fabricated by stir casting process

S. Jacob et al.

INTERNATIONAL CONFERENCE ON EMERGING TRENDS IN ENGINEERING RESEARCH (2017)

Add to Collection

Article Engineering, Civil

Effect of TiB2 content and temperature on sliding wear behavior of AA7075/TiB2 in situ aluminum cast composites

H. B. Michael Rajan et al.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Investigations on dry sliding wear behavior of in situ casted AA7075-TiC metal matrix composites by using Taguchi technique

S. Baskaran et al.

MATERIALS & DESIGN (2014)

Add to Collection

Article Metallurgy & Metallurgical Engineering

EFFECT OF HIGH THERMAL CONDUCTIVITY DIE STEEL IN ALUMINUM CASTING

M. Ayabe et al.

INTERNATIONAL JOURNAL OF METALCASTING (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.