☆ 4.7 Article

A novel monoclinic auxetic metamaterial with tunable mechanical properties

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

Related references

Note: Only part of the references are listed.

Article Mechanics

Deep-learning-based isogeometric inverse design for tetra-chiral auxetics

Zhongyuan Liao et al.

Summary: The study focuses on the application of deep learning in the inverse design of tetra-chiral auxetic materials, aiming to enhance design efficiency and simplify sensitivity analysis through the development of parameterization methods and surrogate models.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Mechanics

Stiffened star-shaped auxetic structure with tri-directional symmetry

Krishna Prasath Logakannan et al.

Summary: In this work, a new auxetic structure with rigid diamonds was designed to enhance the strength and symmetry of a star-shaped auxetic structure. The new structure showed better specific plateau stress and the Poisson's ratio can be adjusted by changing the angle of inclined members, as revealed by experimental and theoretical analysis.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Mechanics

Mechanical properties of foam-filled hexagonal and re-entrant honeycombs under uniaxial compression

Hui Chen Luo et al.

Summary: Filling slow recovery foam into re-entrant honeycombs can prevent lateral buckling, increase stiffness and energy absorption capacity, showing promising potential in protective engineering.

COMPOSITE STRUCTURES (2022)

Add to Collection

Review Engineering, Multidisciplinary

Manufacturing, characteristics and applications of auxetic foams: A state-of-the-art review

Wei Jiang et al.

Summary: Auxetic foams exhibit unique mechanical properties and multiphysics characteristics, making them potential candidates for applications in biomedicine, aerospace, and smart sensing. However, challenges such as complex fabrication and lacking stability hinder their practical applications, requiring further research and development to overcome these barriers.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Engineering, Multidisciplinary

In-plane energy absorption characteristics of a modified re-entrant auxetic structure fabricated via 3D printing

Niranjan Kumar Choudhry et al.

Summary: In this study, the in-plane energy absorption characteristics of modified re-entrant auxetic honeycombs were investigated, showing a 36% improvement in specific energy absorption capacity compared to conventional structures. The introduced nodes with low rotational stiffness contributed to the enhanced energy absorption capacity of the modified structure.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Engineering, Civil

Paper tube-guided blast response of sandwich panels with auxetic re-entrant and regular hexagonal honeycomb cores - An experimental study

Ganchao Chen et al.

Summary: This paper investigates the dynamic behavior and failure modes of metallic sandwich panels with different auxetic and non-auxetic cores under blast tests. The study reveals the effects of blast impulse and core density on the panel blast resistance and failure mechanisms. The research provides valuable references for the design of auxetic honeycomb sandwich core in protection applications.

ENGINEERING STRUCTURES (2022)

Add to Collection

Article Engineering, Civil

A novel enhanced anti-tetra-missing rib auxetic structure with tailorable in-plane mechanical properties

Yilin Zhu et al.

Summary: In this study, a novel enhanced anti-tetra-missing rib structure was proposed and its mechanical properties and deformation mechanism were investigated using mechanical modeling and finite element analysis. The results showed that the structure provides tunable Poisson's ratios and elastic and shear moduli.

ENGINEERING STRUCTURES (2022)

Add to Collection

Article Engineering, Civil

In-plane elastic properties of a novel re-entrant auxetic honeycomb with zigzag inclined ligaments

Yilin Zhu et al.

Summary: A novel 2D re-entrant auxetic honeycomb metamaterial is proposed in this study, which enhances stiffness without compromising auxeticity, while still being convenient and low-cost for fabrication by introducing zigzag inclined ligaments.

ENGINEERING STRUCTURES (2022)

Add to Collection

Article Engineering, Civil

In-plane mechanical behavior of novel auxetic hybrid metamaterials

Wenjiao Zhang et al.

Summary: This paper presents two novel concepts of hybrid metamaterials, combining a core unit cell of re-entrant or cross-chiral shape with lateral missing ribs. The in-plane mechanical properties of these materials have been investigated using finite element simulations, leading to optimized designs and specific effective properties. Nonlinear simulations and experimental tests have been conducted to understand the behavior of these architectures under large deformations.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Article Engineering, Mechanical

The effect of negative Poisson's ratio on the low-velocity impact response of an auxetic nanocomposite laminate beam

Yin Fan et al.

Summary: This study investigates the low-velocity impact response of a shear deformable beam laminated by carbon nanotube reinforced composite layers, which exhibit negative out-of-plane Poisson's ratio due to special symmetric stacking sequences designed based on the Classical Laminate Theory. The newly defined Hertz model and Reddy beam theory are employed to study the effect of out-of-plane NPR on the impact response, considering temperature-dependent material properties and functionally graded patterns of CNT reinforcements. Numerical results obtained by using a Range-Kutta method elucidate the influence of temperature, FG distribution, and CNT volume fraction on the out-of-plane Poisson's ratio and impact response of the beam.

INTERNATIONAL JOURNAL OF MECHANICS AND MATERIALS IN DESIGN (2021)

Add to Collection

Article Construction & Building Technology

Tunable mechanical behavior of auxetic cementitious cellular composites (CCCs): Experiments and simulations

Yading Xu et al.

Summary: This research investigates the compressive behavior of auxetic cementitious cellular composites using experiments and finite element simulations. Results show that CCCs with chiral sections exhibit auxetic behavior, with a unique cracking initiated section rotation mechanism and re-entrant confinement zone under restrained boundary conditions. The unique properties of auxetic CCCs make them promising for various civil engineering applications.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Review Engineering, Multidisciplinary

Advanced honeycomb designs for improving mechanical properties: A review

Chang Qi et al.

Summary: Honeycombs are ultra-light materials with outstanding mechanical properties, widely used in various fields. Different designs at different scales affect the mechanical properties of honeycombs, and classifying honeycomb designs can better understand their characteristics.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Engineering, Civil

Bending response and energy absorption of sandwich beams with novel auxetic honeycomb core

Xuan Zhao et al.

Summary: The study focuses on the bending response and energy absorption of the star-triangular honeycomb core (STH-C) and sandwich beam with an STH-C (STH-SW), showing that structural parameters significantly influence the load-bearing capacity of the sandwich beams, especially the thickness-to-length ratio t/l.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Based on auxetic foam: A novel type of seismic metamaterial for Lamb waves

Ting Ting Huang et al.

Summary: Seismic metamaterial (SM) has gained significant attention in vibration isolation and damping due to its wave manipulation and bandgap properties. A novel 2D SM composed of auxetic foam and steel is proposed to attenuate seismic waves at ultra-low frequencies. Numerical simulations show that modifying the parameters of the components can enhance the bandgap and effectively attenuate seismic waves, aiming to cover the seismic peak spectrum at 2 Hz.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

A novel buckling-restrained brace with auxetic perforated core: Experimental and numerical studies

Yi Zhang et al.

Summary: A novel perforated negative Poisson's ratio core buckling-restrained brace was designed and studied to explore the seismic performance of auxetic metamaterials, revealing their potential for seismic mitigation applications.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Engineering, Mechanical

A 3D Mechanism-driven Hexagonal Metamaterial: Evaluation of Auxetic Behavior

Yutai Su et al.

Summary: This paper introduces a stable 3D sliding-induced hexagonal auxetic metamaterial concept, demonstrating higher compression resistance and stable auxetic behavior through theoretical modeling, finite element analysis, and experimentation. Additionally, the sensitivity of performance and auxetic behavior to the friction coefficient in the sliding mechanism is investigated.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Hybrid Auxetic Structures: Structural Optimization and Mechanical Characterization

Stefan Bronder et al.

Summary: This study focuses on developing new lightweight crash absorbers for cars using auxetic materials with increased energy absorption capacity. Through finite element analysis, parameterized optimization, and experimental investigation, it is found that auxetic hybrid structures can absorb more energy under dynamic loading while saving mass and cost. These structures are produced using additive manufacturing and enhanced with nickel coating and polymer removal to further improve their mechanical properties.

ADVANCED ENGINEERING MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Micropolar homogenization of wavy tetra-chiral and tetra-achiral lattices to identify axial-shear coupling and directional negative Poisson's ratio

Zhihao Yuan et al.

Summary: The study establishes a generalized micropolar homogenization method to characterize the elastic constants of chiral and achiral lattices, revealing coupling effects and directional Poisson's ratio properties of different structures. This offers a powerful platform for designing metamaterials by adjusting both anisotropy and chirality through geometric reconfiguration of lattice structures.

MATERIALS & DESIGN (2021)

Add to Collection

Article Mechanics

Novel Isotropic Anti-Tri-Missing Rib Auxetics with Prescribed In-Plane Mechanical Properties Over Large Deformations

Yilin Zhu et al.

Summary: A novel anti-tri-missing rib structure was proposed in this study, with an enhanced design to improve the auxetic behavior and in-plane isotropy achieved by increasing ligament angle and triangle reinforcement. The results show constant NPR over a large strain range at specific orientations, with improved tunable elastic modulus and controllable isotropic constant NPRs without compromising overall stiffness.

INTERNATIONAL JOURNAL OF APPLIED MECHANICS (2021)

Add to Collection

Article Engineering, Civil

Linear and non-linear in-plane behaviour of a modified re-entrant core cell

Mehmet Seha Tatlier et al.

Summary: This paper presents a method to improve the auxetic re-entrant cell by conserving negative or zero Poisson's ratio feature while enhancing stiffness. A new design element was introduced to achieve this improvement, with analytical expressions and finite element models used for validation. The results show that the new design provides additional rigidity while maintaining negative Poisson's ratios.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Topological characteristics and mechanical properties of uniaxially thermoformed auxetic foam

Qicheng Zhang et al.

Summary: The study presents a simplified procedure for manufacturing auxetic PU foam using a single direction thermoforming compression process on conventional open cell foam samples. Auxetic foams exhibit transverse isotropy with specific compression ratios required to achieve auxeticity. Numerical models built from 3D scans show good agreement with experimental data and help explain deformation mechanisms of auxetic foams.

MATERIALS & DESIGN (2021)

Add to Collection

Article Engineering, Multidisciplinary

A novel combined auxetic tubular structure with enhanced tunable stiffness

Xiang Yu Zhang et al.

Summary: The study introduced a novel combined tubular structure with tunable stiffness to improve bearing capacity and stability by adjusting the length of the central column. Experimental results verified the effectiveness of the finite element model and examined the compression process and stress-strain curve of the tubular structure.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Engineering, Mechanical

Graphene Origami-Enabled Auxetic Metallic Metamaterials: An Atomistic Insight

Shaoyu Zhao et al.

Summary: Graphene origami (GOri)-enabled metallic metamaterials with highly tunable negative Poisson's ratio (NPR) and improved mechanical properties demonstrate a significant potential for auxetic behavior at room temperature, with the NPR of the nanocomposite being further enhanced under pressure and temperature.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

A novel butterfly-shaped auxetic structure with negative Poisson's ratio and enhanced stiffness

ZiWen Zhang et al.

Summary: A novel auxetic butterfly-shaped honeycomb structure was constructed based on butterfly pattern and star-shaped honeycomb structure, with optimized structural parameters obtained through numerical analysis to achieve improved performance. Comparative analysis showed significant enhancements in relative elastic modulus and auxetic effect of the new structure compared to traditional designs.

JOURNAL OF MATERIALS SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Design, fabrication and applications of soft network materials

Jianxing Liu et al.

Summary: Soft network materials, with well-organized microarchitectures inspired by biological tissues, offer a unique combination of properties and design flexibility for customized mechanical performance, leading to a range of promising applications in cutting-edge technologies like bio-integrated electronics and regenerative medicine. Perspectives on remaining challenges and open opportunities are also provided.

MATERIALS TODAY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Novel hybrid auxetic structures for improved in- plane mechanical properties via additive manufacturing

Kusum Meena et al.

Summary: By utilizing additive manufacturing methods like selective laser melting, a novel auxetic structure with S-shaped unit cell was hybridized with star re-entrant unit cells and analyzed numerically and experimentally, showing enhanced auxetic properties and mechanical attributes.

MECHANICS OF MATERIALS (2021)

Add to Collection

Review Engineering, Civil

Design, manufacturing and applications of auxetic tubular structures: A review

Chen Luo et al.

Summary: This paper extensively reviews the design methods, advanced manufacturing technologies, mechanical properties, and potential applications of auxetic tubular structures. Furthermore, it discusses the challenges and opportunities in this field to inspire future research work.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

A novel type of tubular structure with auxeticity both in radial direction and wall thickness

Xiang Yu Zhang et al.

Summary: A novel tubular structure with auxeticity in both wall thickness and radial direction has been proposed, showing good stability under axial compression. The innovative feature lies in opposite deformation directions of its inner and outer diameter. This structure's closed tube wall surfaces broaden its applications in civil and mechanical engineering fields.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Article Mechanics

Mechanical properties of hybrid metamaterial with auxetic chiral cellular structure and silicon filler

Nejc Novak et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Mechanics

A novel design method for 3D positive and negative Poisson's ratio material based on tension-twist coupling effects

Shengyu Duan et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Mechanics

Auxeticity of monoclinic tetrachiral honeycombs

X. Lu et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Instruments & Instrumentation

Enhanced hexa-missing rib auxetics for achieving targeted constant NPR and in-plane isotropy at finite deformation

Yilin Zhu et al.

SMART MATERIALS AND STRUCTURES (2020)

Add to Collection

Article Mechanics

Study on the mechanism of band gap and directional wave propagation of the auxetic chiral lattices

Kai Zhang et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Engineering, Multidisciplinary

Auxetic graphene oxide-porous foam for acoustic wave and shock energy dissipation

Jung-Hwan Oh et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Review Chemistry, Analytical

Cellular Auxetic Structures for Mechanical Metamaterials: A Review

Parth Uday Kelkar et al.

SENSORS (2020)

Add to Collection

Article Engineering, Biomedical

Mechanical performance of auxetic meta-biomaterials

H. M. A. Kolken et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)

Add to Collection

Article Engineering, Mechanical

Re-entrant auxetic lattices with enhanced stiffness: A numerical study

Zeyao Chen et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Add to Collection

Article Engineering, Multidisciplinary

Programmable soft bending actuators with auxetic metamaterials

Pan Qi et al.

SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2020)

Add to Collection

Review Materials Science, Biomaterials

The use of auxetic materials in tissue engineering

Paul Mardling et al.

BIOMATERIALS SCIENCE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Systematic design of tetra-petals auxetic structures with stiffness constraint

Zhen-Pei Wang et al.

MATERIALS & DESIGN (2019)

Add to Collection

Article Engineering, Mechanical

In-plane crushing response of tetra-chiral honeycombs

Chang Qi et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2019)

Add to Collection

Article Engineering, Mechanical

Mechanical modeling of an auxetic tubular braided structure: Experimental and numerical analyses

Yu Chen et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

Add to Collection

Article Engineering, Civil

Negative Poisson's ratio effect of re-entrant anti-trichiral honeycombs under large deformation

L. L. Hu et al.

THIN-WALLED STRUCTURES (2019)

Add to Collection

Article Engineering, Multidisciplinary

Isogeometric shape optimization of smoothed petal auxetics with prescribed nonlinear deformation

Deepak Kumar et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Mechanical design and multifunctional applications of chiral mechanical metamaterials: A review

Wenwang Wu et al.

MATERIALS & DESIGN (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Two nature-mimicking auxetic materials with potential for high energy absorption

Seung Chul Han et al.

MATERIALS TODAY (2019)

Add to Collection

Article Physics, Condensed Matter

Auxetic Yarn Made with Circular Braiding Technology

Ning Jiang et al.

PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2019)

Add to Collection

Article Engineering, Civil

Development and performance evaluation of large-scale auxetic protective systems for localised impulsive loads

Alex Remennikov et al.

INTERNATIONAL JOURNAL OF PROTECTIVE STRUCTURES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Auxetic Mechanical Metamaterials to Enhance Sensitivity of Stretchable Strain Sensors

Ying Jiang et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Mechanics

Optimal form and size characterization of planar isotropic petal-shaped auxetics with tunable effective properties using IGA

Zhen-Pei Wang et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Engineering, Mechanical

An analytical model for star-shaped re-entrant lattice structures with the orthotropic symmetry and negative Poisson's ratios

L. Ai et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

Add to Collection

Article Mechanics

A Mechanics Model of Soft Network Materials With Periodic Lattices of Arbitrarily Shaped Filamentary Microstructures for Tunable Poisson's Ratios

Jianxing Liu et al.

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2018)

Add to Collection

Article Instruments & Instrumentation

Auxetic hexachiral structures with wavy ligaments for large elasto-plastic deformation

Yilin Zhu et al.

SMART MATERIALS AND STRUCTURES (2018)

Add to Collection

Review Instruments & Instrumentation

Auxetic metamaterials and structures: a review

Xin Ren et al.

SMART MATERIALS AND STRUCTURES (2018)

Add to Collection

Article Polymer Science

Woven Fabrics Made of Auxetic Plied Yarns

Wing Sum Ng et al.

POLYMERS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

3D Printed Chiral Cellular Solids with Amplified Auxetic Effects Due to Elevated Internal Rotation

Yunyao Jiang et al.

ADVANCED ENGINEERING MATERIALS (2017)

Add to Collection

Article Instruments & Instrumentation

Auxetic behavior and acoustic properties of microstructured piezoelectric strain sensors

Maria Laura De Bellis et al.

SMART MATERIALS AND STRUCTURES (2017)

Add to Collection

Article Multidisciplinary Sciences

Origami-based cellular metamaterial with auxetic, bistable, and self-locking properties

Soroush Kamrava et al.

SCIENTIFIC REPORTS (2017)

Add to Collection

Article Engineering, Multidisciplinary

Isogeometric shape optimization of smoothed petal auxetic structures via computational periodic homogenization

Zhen-Pei Wang et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2017)

Add to Collection

Article Engineering, Manufacturing

Development, characterization and analysis of auxetic structures from braided composites and study the influence of material and structural parameters

Rui Magalhaes et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

Add to Collection

Article Mechanics

Elastic properties of chiral, anti-chiral, and hierarchical honeycombs: A simple energy-based approach

Davood Mousanezhad et al.

THEORETICAL AND APPLIED MECHANICS LETTERS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Topology Optimized Architectures with Programmable Poisson's Ratio over Large Deformations

Anders Clausen et al.

ADVANCED MATERIALS (2015)

Add to Collection

Article Engineering, Multidisciplinary

Influence of translational disorder on the mechanical properties of hexachiral honeycomb systems

Luke Mizzi et al.

COMPOSITES PART B-ENGINEERING (2015)

Add to Collection

Article Physics, Condensed Matter

Poisson's ratio of rectangular anti-chiral structures with size dispersion of circular nodes

A. A. Pozniak et al.

PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2014)

Add to Collection

Article Materials Science, Textiles

Auxetic materials and their potential applications in textiles

Zhengyue Wang et al.

TEXTILE RESEARCH JOURNAL (2014)

Add to Collection

Article Instruments & Instrumentation

Homogenized mechanical properties of auxetic composite materials in finite-strain elasticity

Dennis M. Kochmann et al.

SMART MATERIALS AND STRUCTURES (2013)

Add to Collection

Article Materials Science, Composites

Elastic constants of 3-, 4-and 6-connected chiral and anti-chiral honeycombs subject to uniaxial in-plane loading

A. Alderson et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2010)

Add to Collection

Article Acoustics

An edge-based smoothed finite element method (ES-FEM) for static, free and forced vibration analyses of solids

G. R. Liu et al.

JOURNAL OF SOUND AND VIBRATION (2009)

Add to Collection

Article Materials Science, Multidisciplinary

A novel mechanism for generating auxetic behaviour in reticulated foams: Missing rib foam model

CW Smith et al.

ACTA MATERIALIA (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.