☆ 4.7 Article

Improving the galloping energy harvesting performance with magnetic coupling

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

Related references

Note: Only part of the references are listed.

Review Thermodynamics

A review of flow-induced vibration energy harvesters

Xiaoqing Ma et al.

Summary: This paper comprehensively reviews the recent advances in flow-induced vibration energy harvesters in terms of their working principles, categories, enhancement methods, model derivation and calculation methods, influence of interface circuits, and energy harvesting efficiency calculation methods. The working principles and current development progress of various types of energy harvesters are discussed. Enhancement methods and critical challenges are characterized and summarized. Future research directions and prospects are proposed and discussed.

ENERGY CONVERSION AND MANAGEMENT (2022)

Add to Collection

Article Engineering, Mechanical

A unified equivalent circuit and impedance analysis method for galloping piezoelectric energy harvesters

Chunbo Lan et al.

Summary: A unified analysis framework for GPEHs is proposed in this paper, allowing insights at a system level. The framework is based on an equivalent circuit and equivalent impedance, providing a comprehensive view of the physics of linear GPEHs in different domains. By establishing analytical models, the framework eliminates the separation between the power performances of GPEHs connected with various interface circuits, facilitating the understanding of system power behavior.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Engineering, Multidisciplinary

Homoclinic bifurcation for a bi-stable piezoelectric energy harvester subjected to galloping and base excitations

Li Hai-Tao et al.

Summary: This paper studies the homoclinic bifurcation and nonlinear characteristics of a bistable piezoelectric energy harvester under galloping and base excitation simultaneously. The electromechanical model of the energy harvester is established, and the threshold for snap-through is derived using the Melnikov method. The study provides a guideline for the optimum design of the bi-stable piezoelectric energy harvester for wind and vibration in practice.

APPLIED MATHEMATICAL MODELLING (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Enhanced frequency synchronization for concurrent aeroelastic and base vibratory energy harvesting using a softening nonlinear galloping energy harvester

Shun Chen et al.

Summary: The proposed softening nonlinear aeroelastic galloping energy harvester enhances energy harvesting efficiency and achieves frequency synchronization over a broadened bandwidth, effectively utilizing energy sources from wind flow and base vibration.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2022)

Add to Collection

Article Engineering, Mechanical

Dynamic response mechanism of the galloping energy harvester under fluctuating wind conditions

Ming Xu et al.

Summary: The study investigates the dynamic characteristics of the galloping energy harvester by separating wind speed into mean and fluctuating components, considering the latter as Gaussian white noise. Decoupling the output voltage using a generalized harmonic transformation and deriving mean output power through stochastic averaging are key approaches employed. Critical wind speed and optimal parameters of the harvester were determined, with the analytical procedure validated through Monte Carlo simulation.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Instruments & Instrumentation

Modeling and experimental investigation of asymmetric distance with magnetic coupling based on galloping piezoelectric energy harvester

Huirong Zhang et al.

Summary: This paper presents an asymmetric magnetic coupling piezoelectric energy harvester based on galloping to scavenge low-speed wind. The mathematical model of the harvester is constructed and verified through experiments. The results show that the asymmetric harvester has a lower threshold wind speed and lower power and voltage output compared to the traditional galloping piezoelectric energy harvester. The potential energy of the harvesting system at different magnet distances is analyzed, and the harvester is found to operate in monostable and bistable states.

SMART MATERIALS AND STRUCTURES (2022)

Add to Collection

Article Thermodynamics

Wake galloping energy harvesting in heat exchange systems under the influence of ash deposition

Junlei Wang et al.

Summary: This study proposes a wake galloping energy harvester for heat exchange systems and investigates the effects of different ash deposition types on energy harvesting performance. The results show that the bell-shaped cylinder is more beneficial for energy harvesting, and the optimal configuration is determined with a space ratio of 1.5 between the upstream and downstream cylinders. Both types of ash deposit cylinders can cause the quenching phenomenon, and computational fluid dynamics (CFD) studies explain the underlying mechanisms.

ENERGY (2022)

Add to Collection

Article Thermodynamics

Novel piezoelectric wind energy harvester based on coupled galloping phenomena with characterization and quantification of its dynamic behavior

Hoyoung Kim et al.

Summary: In this study, a novel piezoelectric energy harvester based on coupled transverse and interference galloping is proposed to improve the energetic performance of the conventional transverse galloping-based piezoelectric energy harvester. A special approach is developed to quantify the stochastic characteristics of the aerodynamic force under the coupled galloping effects and a set of coupled dynamic model system is developed. An additional nonlinear damping mechanism is revealed and validated through theoretical and experimental analysis.

ENERGY CONVERSION AND MANAGEMENT (2022)

Add to Collection

Article Engineering, Mechanical

A joint-nested structure piezoelectric energy harvester for high-performance wind-induced vibration energy harvesting

Weilin Liao et al.

Summary: This paper proposes a joint-nested structure piezoelectric energy harvester (JNS-PWEH) to improve the weak power generation performance of existing harvesters. Experimental results show that the performance of the JNS-PWEH has been significantly improved and further optimization of the structure can enhance the output performance. Therefore, the joint nested structure is of great importance in enhancing indirect-excitation piezoelectric energy harvesters.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Improved Flow-Induced Vibration Energy Harvester by Using Magnetic Force: An Experimental Study

Dongxing Cao et al.

Summary: This paper proposed a flow-induced piezoelectric vibration energy harvester with magnetic force enhancement and demonstrated its effectiveness in improving the acquisition voltage, especially in low velocity water flow. The introduction of magnetic force showed positive effects on enhancing the harvesting performance of the vibration energy harvester.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Hybrid energy harvesting technology: From materials, structural design, system integration to applications

Huicong Liu et al.

Summary: Advancements in the past decade have led to significant progress in hybrid energy harvesting technology, combining energy sources and conversion mechanisms to improve power output. Vibration and thermal energy harvesters play a dominant role in hybrid energy harvesting.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Add to Collection

Article Engineering, Mechanical

Enhancing energy harvesting from flow-induced vibrations of a circular cylinder using a downstream rectangular plate: An experimental study

Junlei Wang et al.

Summary: This study experimentally confirmed that placing a rectangular plate at the wake of a circular cylinder can significantly increase the effective wind speed range for energy harvesting. Different spacings between the cylinder and plate led to different effects, with the most effective design scheme being a 2D-high plate located around 0.2D to 0.4D downstream of the circular cylinder.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Article Thermodynamics

Hydrokinetic piezoelectric energy harvesting by wake induced vibration

Daoli Zhao et al.

Summary: A new hydrokinetic piezoelectric energy harvester utilizing wake-induced vibration (WIV) was proposed and studied experimentally and mathematically for different velocity regions. Frequency analysis showed the performance in VIV region and WIV region were dominated by wake vortex frequency and natural frequency, respectively. Experimental results demonstrated that the maximum output power was obtained in the reattachment region.

ENERGY (2021)

Add to Collection

Article Engineering, Mechanical

Flow-induced vibration of a trapezoidal cylinder placed at typical flow orientations

Hongjun Zhu et al.

Summary: The paper discusses the numerical results of flow-induced vibration for a trapezoidal cylinder at different flow orientations, showing VIV and galloping in different attack angles. It is found that the trapezoidal cylinder can extract more energy from the ambient flow compared to a square cylinder, especially in the VIV branch.

JOURNAL OF FLUIDS AND STRUCTURES (2021)

Add to Collection

Article Thermodynamics

Bio-inspired bistable piezoelectric vibration energy harvester: Design and experimental investigation

Jiaxi Zhou et al.

Summary: A novel bionic-dipteran energy harvester (BDEH) inspired by the flight mechanism of dipteran was proposed to collect ultralow-frequency vibration energy. The effectiveness of the BDEH was demonstrated under cross-well vibration pattern, where it showed the highest efficiency in energy harvesting.

ENERGY (2021)

Add to Collection

Article Thermodynamics

Exploring the potential benefits of using metasurface for galloping energy harvesting

Junlei Wang et al.

Summary: This paper explores the potential application of metasurfaces in designing aerodynamic systems, focusing on improving galloping energy harvesting. Different metasurfaces are proposed to be wrapped on bluff bodies, with experimental results confirming the benefits of using convex cylinder metasurfaces for enhancing energy harvesting performance.

ENERGY CONVERSION AND MANAGEMENT (2021)

Add to Collection

Article Thermodynamics

Adaptive wind energy harvester with transformable bluff body

Sehun Jeon et al.

Summary: A novel adaptive wind energy harvester with a transformable bluff body is proposed in this study. The shape of the bluff body changes according to external wind velocity, leading to improved energetic performance compared to conventional systems.

ENERGY CONVERSION AND MANAGEMENT (2021)

Add to Collection

Article Physics, Multidisciplinary

Improving the performance of wind energy galloping harvesting with magnetic coupling

Hai-Tao Li et al.

Summary: In a realistic environment where wind speed is generally low, an advanced monostable galloping-based energy harvester (AM-GEH) with magnetic coupling was proposed to improve energy harvesting efficiency. Parameter analysis and experiments showed that the cut-in wind speed of AM-GEH decreased by 55% and its RMS voltage increased by 69.92%.

EPL (2021)

Add to Collection

Article Engineering, Mechanical

Potential well escape in a galloping twin-well oscillator

Hussam Alhussein et al.

NONLINEAR DYNAMICS (2020)

Add to Collection

Article Thermodynamics

An asymmetric bending-torsional piezoelectric energy harvester at low wind speed

Jinda Jia et al.

ENERGY (2020)

Add to Collection

Article Thermodynamics

A novel self-tuning wind energy harvester with a slidable bluff body using vortex-induced vibration

Wan Sun et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

Add to Collection

Article Engineering, Mechanical

Two-span piezoelectric beam energy harvesting

Ze-Qi Lu et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Add to Collection

Article Instruments & Instrumentation

Piezoelectric wind energy harvesting subjected to the conjunction of vortex-induced vibration and galloping: comprehensive parametric study and optimization

Kai Yang et al.

SMART MATERIALS AND STRUCTURES (2020)

Add to Collection

Article Engineering, Mechanical

Ultra-broadband piezoelectric energy harvesting via bistable multi-hardening and multi-softening

Zhimiao Yan et al.

NONLINEAR DYNAMICS (2020)

Add to Collection

Article Engineering, Mechanical

Dynamics of the double-beam piezo-magneto-elastic nonlinear wind energy harvester exhibiting galloping-based vibration

Junlei Wang et al.

NONLINEAR DYNAMICS (2020)

Add to Collection

Review Energy & Fuels

The state-of-the-art review on energy harvesting from flow-induced vibrations

Junlei Wang et al.

APPLIED ENERGY (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Miura-origami-inspired electret/triboelectric power generator for wearable energy harvesting with water-proof capability

Kai Tao et al.

MICROSYSTEMS & NANOENGINEERING (2020)

Add to Collection

Article Acoustics

Modeling and nonlinear analysis of stepped beam energy harvesting from galloping vibrations

Jiantao Zhang et al.

JOURNAL OF SOUND AND VIBRATION (2020)

Add to Collection

Review Chemistry, Analytical

Blood Pressure Sensors: Materials, Fabrication Methods, Performance Evaluations and Future Perspectives

Ahmed Al-Qatatsheh et al.

SENSORS (2020)

Add to Collection

Article Thermodynamics

High-performance piezoelectric wind energy harvester with Y-shaped attachments

Junlei Wang et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

Add to Collection

Article Engineering, Mechanical

Development of the optimal bluff body for wind energy harvesting using the synergetic effect of coupled vortex induced vibration and galloping phenomena

Wan Sun et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

Add to Collection

Article Physics, Applied

Performance evaluation of twin piezoelectric wind energy harvesters under mutual interference

Gang Hu et al.

APPLIED PHYSICS LETTERS (2019)

Add to Collection

Article Instruments & Instrumentation

Modeling and verification of piezoelectric wind energy harvesters enhanced by interaction between vortex-induced vibration and galloping

Xiaokang Yang et al.

SMART MATERIALS AND STRUCTURES (2019)

Add to Collection

Article Energy & Fuels

Theoretical modeling, wind tunnel measurements, and realistic environment testing of galloping-based electromagnetic energy harvesters

L. B. Zhang et al.

APPLIED ENERGY (2019)

Add to Collection

Article Physics, Applied

A double-beam piezo-magneto-elastic wind energy harvester for improving the galloping-based energy harvesting

Kai Yang et al.

APPLIED PHYSICS LETTERS (2019)

Add to Collection

Article Engineering, Mechanical

Wideband PZT energy harvesting from the wake of a bluff body in varying flow speeds

Masoud Rezaei et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

Add to Collection

Article Thermodynamics

Harvesting wind energy with bi-stable snap-through excited by vortex-induced vibration and galloping

Weiyang Qin et al.

ENERGY (2019)

Add to Collection

Article Instruments & Instrumentation

Nonlinear magnetic-coupled flutter-based aeroelastic energy harvester: modeling, simulation and experimental verification

Kui Li et al.

SMART MATERIALS AND STRUCTURES (2019)

Add to Collection

Review Acoustics

Micropower Generation Using Cross-Flow Instabilities: A Review of the Literature and Its Implications

Mohammed F. Daqaq et al.

JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME (2019)

Add to Collection

Article Energy & Fuels

An impact-based broadband aeroelastic energy harvester for concurrent wind and base vibration energy harvesting

Liya Zhao et al.

APPLIED ENERGY (2018)

Add to Collection

Article Physics, Applied

Y-type three-blade bluff body for wind energy harvesting

Feng-Rui Liu et al.

APPLIED PHYSICS LETTERS (2018)

Add to Collection

Article Thermodynamics

Scavenging wind energy by a Y-shaped bi-stable energy harvester with curved wings

Zhiyong Zhou et al.

ENERGY (2018)

Add to Collection

Article Engineering, Mechanical

A low-frequency, wideband quad-stable energy harvester using combined nonlinearity and frequency up-conversion by cantilever-surface contact

Chen Wang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

Add to Collection

Article Engineering, Mechanical

Modeling and experimental validation of a buckled compressive-mode piezoelectric energy harvester

Hai Tao Li et al.

NONLINEAR DYNAMICS (2018)

Add to Collection

Review Chemistry, Physical

High-Performance Piezoelectric Energy Harvesters and Their Applications

Zhengbao Yang et al.

JOULE (2018)

Add to Collection

Article Acoustics

Design and experimental analysis of broadband energy harvesting from vortex-induced vibrations

L. B. Zhang et al.

JOURNAL OF SOUND AND VIBRATION (2017)

Add to Collection

Article Energy & Fuels

Piezomagnetoelastic energy harvesting from vortex-induced vibrations using monostable characteristics

R. Naseer et al.

APPLIED ENERGY (2017)

Add to Collection

Article Physics, Applied

Enhanced piezoelectric wind energy harvesting based on a buckled beam

Jiantao Zhang et al.

APPLIED PHYSICS LETTERS (2017)

Add to Collection

Article Physics, Applied

Orientation of bluff body for designing efficient energy harvesters from vortex-induced vibrations

H. L. Dai et al.

APPLIED PHYSICS LETTERS (2016)

Add to Collection

Article Physics, Applied

A broadband bi-stable flow energy harvester based on the wake-galloping phenomenon

A. H. Alhadidi et al.

APPLIED PHYSICS LETTERS (2016)

Add to Collection

Article Physics, Applied

Enhanced broadband piezoelectric energy harvesting using rotatable magnets

Shengxi Zhou et al.

APPLIED PHYSICS LETTERS (2013)

Add to Collection

Article Instruments & Instrumentation

Comparison of modeling methods and parametric study for a piezoelectric wind energy harvester

Liya Zhao et al.

SMART MATERIALS AND STRUCTURES (2013)

Add to Collection

Article Instruments & Instrumentation

Aeroelastic flutter energy harvester design: the sensitivity of the driving instability to system parameters

Matthew Bryant et al.

SMART MATERIALS AND STRUCTURES (2011)

Add to Collection

Article Acoustics

Energy harvesting from transverse galloping

A. Barrero-Gil et al.

JOURNAL OF SOUND AND VIBRATION (2010)

Add to Collection

© Peeref 2019-2024. All rights reserved.