Related references
Note: Only part of the references are listed.A bio-inspired foam-filled multi-cell structural configuration for energy absorption
Ruyang Yao et al.
COMPOSITES PART B-ENGINEERING (2022)
A reinforced energy-absorbing structure formed by combining multiple aluminum foam-filled open-hole tubes
Suchao Xie et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)
Mechanical characterization and numerical modeling on the yield and fracture behaviors of polymethacrylimide (PMI) foam materials
Xintao Huo et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)
Investigation into multiaxial mechanical behaviors of Kelvin and Octet-B polymeric closed-cell foams
Gang Zheng et al.
THIN-WALLED STRUCTURES (2022)
Crashworthiness performance of lightweight Composite Metallic Foams at high temperatures
Emanoil Linul et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)
Low-velocity impact response of multilayer foam core sandwich panels with composite face sheets
Yefei Zhu et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)
Initial yield behaviour of closed-cell aluminium foams in biaxial loading
Balaji Vengatachalam et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)
Influences of relative density and strain rate on the mechanical properties of Al-cenosphere-SWNTs hybrid foams
Dilip Muchhala et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)
On multiaxial failure behavior of closed-cell aluminum foams under medium strain rates
Erdong Wang et al.
THIN-WALLED STRUCTURES (2021)
Strain-rate dependency and impact dynamics of closed-cell aluminium foams
M. A. Kader et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Experimental study on the dynamic responses of foam sandwich panels with different facesheets and core gradients subjected to blast impulse
Guangyong Sun et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2020)
Inverse identification of cell-wall material properties of closed-cell aluminum foams based upon Vickers nano-indentation tests
Guangyong Sun et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Computational analysis and optimization of sandwich panels with homogeneous and graded foam cores for blast resistance
Erdong Wang et al.
THIN-WALLED STRUCTURES (2020)
Mechanical behavior of steel and aluminum foams at elevated temperatures. Local buckling based approach toward understanding of the material system behavior
M. Tavares et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Effects of impactor shape on the deformation and energy absorption of closed cell aluminium foams under low velocity impact
M. A. Islam et al.
MATERIALS & DESIGN (2020)
A numerical solution to accurately predict deformation behaviour of metallic foam material up -to densification region for the possible use in composite structures
Anshul Badkul et al.
COMPOSITE STRUCTURES (2020)
Characterization of initial and subsequent yield behaviors of closed-cell aluminum foams under multiaxial loadings
Erdong Wang et al.
COMPOSITES PART B-ENGINEERING (2020)
On low-velocity impact response of foam-core sandwich panels
Xintao Huo et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Sequential damage study induced in fiber reinforced composites by shear and tensile stress using a newly developed Arcan fixture
Israr Ud Din et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Energy absorption of cast metal and composite foams tested in extremely low and high-temperatures
Pawel Kaczynski et al.
MATERIALS & DESIGN (2020)
Experimental and numerical investigation into the crashworthiness of metal-foam-composite hybrid structures
Guangyong Sun et al.
COMPOSITE STRUCTURES (2019)
Global topology of failure surfaces of metallic foams in principal-stress space and principal-strain space studied by numerical simulations
Yidong Wu et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Modification and verification of the Deshpande-Fleck foam model: A variable ellipticity
Changfeng Zhu et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Flow stress of open-celled aluminum foams based on current density and the optimal foam for energy absorption
L. L. Hu et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Three dimensional modelling of closed-cell aluminium foams with predictive macroscopic behaviour
B. Vengatachalam et al.
MECHANICS OF MATERIALS (2019)
Numerical study on mechanical behavior of foam core sandwich plates under repeated impact loadings
Kailing Guo et al.
COMPOSITE STRUCTURES (2019)
Compressive behavior of Mg alloy foams at elevated temperature
Xiaotong Lu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Multiaxial failure surface of PVC foams and monitoring of deformation bands by three-dimensional digital image correlation
Francesca Concas et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2019)
On the high-temperature crushing of metal foams
B. S. Aakash et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2019)
Impact perforation of aluminium Cymat foam
I Elnasri et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Development of Modified Arcan Fixture for biaxial loading response of fiber-reinforced composites
P. Hao et al.
POLYMER TESTING (2019)
Mechanical response and dynamic deformation mechanisms of closed-cell aluminium alloy foams under dynamic loading
M. A. Islam et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2018)
Dynamic compressive behaviour of cellular materials: A review of phenomenon, mechanism and modelling
Yongle Sun et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2018)
Investigations on the yield behavior of metal foam under multiaxial loadings by an imaged-based mesoscopic model
Geng Luo et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
Deformation response of EPS foam under combined compression-shear loading. Part I: Experimental design and quasi-static tests
Chen Ling et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
Deformation response of EPS foam under combined compression-shear loading. Part II: High strain rate dynamic tests
Chen Ling et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
The mechanical properties of expanded perlite-aluminium syntactic foam at elevated temperatures
Mehdi Taherishargh et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
The temperature and anisotropy effect on compressive behavior of cylindrical closed-cell aluminum-alloy foams
Emanoil Linul et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Crashworthiness analysis of foam filled square column considering strain rate effect of the foam
Tatacipta Dirgantara et al.
THIN-WALLED STRUCTURES (2018)
The effects of foam filling on the dynamic response of metallic corrugated core sandwich panel under air blast loading - Experimental investigations
Yuansheng Cheng et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
Crushing and densification of rapid prototyping polylactide foam: Meso-structural effect and a statistical constitutive model
Wang Shilong et al.
MECHANICS OF MATERIALS (2018)
Low-velocity impact behaviour of sandwich panels with homogeneous and stepwise graded foam cores
Guangyong Sun et al.
MATERIALS & DESIGN (2018)
Deformation and perforation of sandwich panels with aluminum-foam core at elevated temperatures
Zhibin Li et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2017)
Global topology of yield surfaces of metallic foams in principal-stress space and principal-strain space studied by experiments and numerical simulations
Yidong Wu et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)
Experimental and numerical investigation into axial compressive behaviour of thin-walled structures filled with foams and composite skeleton
Guohua Zhu et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)
A constitutive model of aluminum foam for crash simulations
Howie Fang et al.
INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS (2017)
Quasi-static compressive behavior of the ex-situ aluminum-alloy foam-filled tubes under elevated temperature conditions
Nima Movahedi et al.
MATERIALS LETTERS (2017)
Yield properties of closed-cell aluminum foam under triaxial loadings by a 3D Voronoi model
Xiaoyang Zhang et al.
MECHANICS OF MATERIALS (2017)
A numerical study of temperature effect on the penetration of aluminum foam sandwich panels under impact
Huifeng Xi et al.
COMPOSITES PART B-ENGINEERING (2017)
Strain-rate effects in Ni/Al composite metal foams from quasi-static to low-velocity impact behaviour
A. Jung et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Investigation of strain-rate effect on the compressive behaviour of closed-cell aluminium foam by 3D image-based modelling
Yongle Sun et al.
MATERIALS & DESIGN (2016)
Uniaxial and biaxial failure behaviors of aluminum alloy foams
Zhiwei Zhou et al.
COMPOSITES PART B-ENGINEERING (2014)
Dynamic stress-strain states for metal foams using a 3D cellular model
Zhijun Zheng et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2014)
Temperature effects on the mechanical behavior of aluminum foam under dynamic loading
Pengfei Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Identification of material parameters for aluminum foam at high strain rate
Yong Zhang et al.
COMPUTATIONAL MATERIALS SCIENCE (2013)
Effect of temperature on the indentation behavior of closed-cell aluminum foam
Zhibin Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Analysis of anisotropy and strain rate sensitivity of open-cell metal foam
M. Vesenjak et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Loading rate effect on yield surface of aluminum alloy foams
Zhiwei Zhou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Numerical and experimental studies of polyurethane foam under impact loading
Eva Kasparek et al.
COMPUTATIONAL MATERIALS SCIENCE (2011)
Compressive behavior of closed-cell aluminum alloy foams at medium strain rates
Zhihua Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Compressive behaviour of closed-cell aluminium foams at high strain rates
Jianhu Shen et al.
COMPOSITES PART B-ENGINEERING (2010)
Finite element simulation of the plastic collapse of closed-cell aluminum foams with X-ray computed tomography
Insu Jeon et al.
MECHANICS OF MATERIALS (2010)
Comparison of quasi-static and dynamic compression behavior of closed-cell aluminum foam
R. Edwin Raj et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Behavior of closed cell aluminium foams upon compressive testing at elevated temperatures: Experimental results
Mohamed Shehata Aly
MATERIALS LETTERS (2007)
Compressive response of a closed-cell aluminum foam at high strain rate
T Mukai et al.
SCRIPTA MATERIALIA (2006)
The effect of structural defects on the compressive behavior of closed-cell Al foam
I Jeon et al.
ACTA MATERIALIA (2005)
Measurement of strain rate sensitivity of aluminium foams for energy dissipation
R Montanini
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2005)
In-plane shear testing of thick-section pultruded FRP composites using a modified Arcan fixture
R El-Hajjar et al.
COMPOSITES PART B-ENGINEERING (2004)
Experimental studies on the yield behavior of ductile and brittle aluminum foams
M Doyoyo et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2003)
Validation of constitutive models applicable to aluminium foams
AG Hanssen et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2002)
Isotropic constitutive models for metallic foams
VS Deshpande et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2000)
Strain rate sensitivity of a closed-cell aluminum foam
A Paul et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
A continuum plasticity model for the constitutive and indentation behaviour of foamed metals
RE Miller
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2000)
High strain rate compressive behaviour of aluminium alloy foams
VS Deshpande et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2000)
Share Paper
