Related references
Note: Only part of the references are listed.Crystal-plasticity modeling of phase transformation-viscoplasticity coupling in high-temperature shape memory alloys
Pawan S. Chaugule et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2022)
Investigation of uniaxial ratcheting fatigue behaviours and fracture mechanism of GH742 superalloy at 923 K
Weiwen Kong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
A universal constitutive model for hybrid stress-strain controlled creep-fatigue deformation
Tianyu Zhang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)
Physically-based modeling of cyclic softening and damage behaviors for a martensitic turbine rotor material at elevated temperature
Dao-Hang Li et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
A full-field crystal plasticity model including the effects of precipitates: Application to monotonic, load reversal, and low-cycle fatigue behavior of Inconel 718
Adnan Eghtesad et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Direct comparison of microstructure-sensitive fatigue crack initiation via crystal plasticity simulations and in situ high-energy X-ray experiments
Veerappan Prithivirajan et al.
MATERIALS & DESIGN (2021)
A Lattice-misfit-dependent Micromechanical Approach in Ni-based Single Crystal Superalloys
Jean-Briac Le Graverend et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)
Dislocation density based crystal plasticity model incorporating the effect of precipitates in IN718 under monotonic and cyclic deformation
Sukumar Agaram et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2021)
Experimental characterization and crystal plasticity modeling of anisotropy, tension-compression asymmetry, and texture evolution of additively manufactured Inconel 718 at room and elevated temperatures
Saeede Ghorbanpour et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Stress response and microstructural evolution of nickel-based superalloys during low cycle fatigue: Physics-based modelling of cyclic hardening and softening
F. D. Leon-Cazares et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Viscoplastic Ratcheting Response of Materials under Step-Loading Conditions at Various Cyclic Stress Levels
P. Karvan et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)
Constitutive model of an additively manufactured ductile nickel-based superalloy undergoing cyclic plasticity
Thomas Lindstrom et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Uniaxial Ratcheting Behavior of a Weather-Resistant Rail Steel: Effect of Mean Stress and Stress Amplitude
P. P. Sarkar et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)
Modelling thermo-mechanical cyclic behavior of P91 steel
Wladyslaw Egner et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
High temperature fatigue and creep-fatigue behaviors in a Ni-based superalloy: Damage mechanisms and life assessment
Run-Zi Wang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Cyclic plasticity modeling of nickel-based superalloy Inconel 718 under multi-axial thermo-mechanical fatigue loading conditions
Jingyu Sun et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Improving creep resistance of nickel-based superalloy Inconel 718 by tailoring gamma double prime variants
Hongjun Zhang et al.
SCRIPTA MATERIALIA (2019)
Low-cycle fatigue of IN 718: Effect of waveform
Kaustav Barat et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2019)
Cyclic hardening/softening behavior of 316L stainless steel at elevated temperature including strain-rate and strain-range dependence: Experimental and damage-coupled constitutive modeling
Xue-fang Xie et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Investigation on ratcheting-fatigue behavior and damage mechanism of GH4169 at 650 °C
Y. M. Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Isothermal and thermomechanical fatigue behavior of Inconel 718 superalloy
Wenkai Deng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Crystal plasticity simulation of the effect of grain size on the fatigue behavior of polycrystalline Inconel 718
A. Cruzado et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Modeling the cyclic softening and lifetime of ferritic-martensitic steels under creep-fatigue loading
Ulrich Fuehrer et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
A microstructural based creep model applied to alloy 718
Andreas Drexler et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Modeling Tensile, Compressive, and Cyclic Response of Inconel 718 Using a Crystal Plasticity Model Incorporating the Effects of Precipitates
Marko Knezevic et al.
PROCEEDINGS OF THE 9TH INTERNATIONAL SYMPOSIUM ON SUPERALLOY 718 & DERIVATIVES: ENERGY, AEROSPACE, AND INDUSTRIAL APPLICATIONS (2018)
Effect of anisotropy and texture on the low cycle fatigue behavior of Inconel 718 processed via electron beam melting
M. M. Kirka et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Interaction of cyclic softening and stress relaxation of 9-12% Cr steel under strain-controlled fatigue-creep condition: Experimental and modeling
Shang-Lin Zhang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
A crystal plasticity model incorporating the effects of precipitates in superalloys: Application to tensile, compressive, and cyclic deformation of Inconel 718
Saeede Ghorbanpour et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Modeling cyclic deformation of inconel 718 superalloy by means of crystal plasticity and computational homogenization
A. Cruzado et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2017)
Fatigue strain mapping via digital image correlation for Ni-based superalloys: The role of thermal activation on cube slip
Alberto W. Mello et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Creep behaviors and mechanisms of Inconel718 and Allvac718plus
Tongwei Ni et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Non-saturated cyclic softening and uniaxial ratcheting of a high-strength steel: Experiments and viscoplastic constitutive modeling
Qiang Wang et al.
MECHANICS OF MATERIALS (2017)
1D cyclic yield model independent of load spectrum characteristics and its application to Inconel 718
T. Klotz et al.
MECHANICS OF MATERIALS (2017)
Prediction of fatigue crack growth retardation using a cyclic cohesive zone model
Huan Li et al.
ARCHIVE OF APPLIED MECHANICS (2017)
Micromechanism of cyclic plastic deformation of alloy IN 718 at 600°C
A. Banerjee et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2016)
Effect of Double Aging Heat Treatment on the Short-Term Creep Behavior of the Inconel 718
Felipe Rocha Caliari et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2016)
A high temperature fatigue damage model for single crystal superalloys
Myriam Kaminski et al.
MATERIALS AT HIGH TEMPERATURES (2016)
Low cycle fatigue and creep-fatigue interaction behavior of nickel-base superalloy GH4169 at elevated temperature of 650°C
G. Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Multiscale modeling of the mechanical behavior of IN718 superalloy based on micropillar compression and computational homogenization
A. Cruzado et al.
ACTA MATERIALIA (2015)
Flow stress model for IN718 accounting for evolution of strengthening precipitates during thermal treatment
M. Fisk et al.
COMPUTATIONAL MATERIALS SCIENCE (2014)
Analysis of uniaxial ratcheting behavior and cyclic mean stress relaxation of a duplex stainless steel
Chin-Hyung Lee et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2014)
Modeling of abnormal mechanical properties of nickel-based single crystal superalloy by three-dimensional discrete dislocation dynamics
Hui Yang et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2014)
Development of new cyclic plasticity model for 304LN stainless steel through simulation and experimental investigation
N. Khutia et al.
MECHANICS OF MATERIALS (2014)
Applying viscoplastic constitutive models to predict ratcheting behavior of sintered nanosilver lap-shear joint
Gang Chen et al.
MECHANICS OF MATERIALS (2014)
Viscoplastic constitutive equations of combustion chamber materials including cyclic hardening and dynamic strain aging
J. -L. Chaboche et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
Low-cycle fatigue behavior of a high manganese austenitic twin-induced plasticity steel
Pengcheng Guo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
High temperature low cycle fatigue deformation behaviour of forged IN 718 superalloy turbine disc
Kartik Prasad et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Constitutive model for uniaxial time-dependent ratcheting of 6061-T6 aluminum alloy
Jun Ding et al.
COMPUTATIONAL MATERIALS SCIENCE (2012)
Imposing periodic boundary condition on arbitrary meshes by polynomial interpolation
V. -D. Nguyen et al.
COMPUTATIONAL MATERIALS SCIENCE (2012)
Cyclic inelastic constitutive equations and their impact on the fatigue life predictions
J. -L. Chaboche et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2012)
Creep Behavior of the Inconel 718 Superalloy
T. Sugahara et al.
DIFFUSION IN SOLIDS AND LIQUIDS VII (2012)
Cyclic polycrystalline visco-plastic model for ratchetting of 316L stainless steel
Guozheng Kang et al.
COMPUTATIONAL MATERIALS SCIENCE (2011)
Large-scale 3D random polycrystals for the finite element method: Generation, meshing and remeshing
R. Quey et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2011)
Uniaxial ratcheting and low-cycle fatigue failure behaviors of AZ91D magnesium alloy under cyclic tension deformation
Y. C. Lin et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
Modeling of the Constitutive Behavior of Inconel 718 at Intermediate Temperatures
D. Gustafsson et al.
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2011)
Experimental characterization and modelling of the cyclic softening of carbon-black filled rubbers
Yannick Merckel et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Tensile deformation behaviour of forged disc of IN 718 superalloy at 650 °C
Kartik Prasad et al.
MATERIALS & DESIGN (2010)
Ratcheting and fatigue behavior of a copper alloy under uniaxial cyclic loading with mean stress
C. -B. Lim et al.
INTERNATIONAL JOURNAL OF FATIGUE (2009)
Uniaxial ratcheting and fatigue failure of tempered 42CrMo steel: Damage evolution and damage-coupled visco-plastic constitutive model
Guozheng Kang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2009)
Macro versus micro-scale constitutive models in simulating proportional and nonproportional cyclic and ratcheting responses of stainless steel 304
Shree Krishna et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2009)
Tensile deformation behavior of superalloy 718 at elevated temperatures
Y. Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Aging effects on the microstructure and creep behavior of Inconel 718 superalloy
C. -M. Kuo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
A review of some plasticity and viscoplasticity constitutive theories
J. L. Chaboche
INTERNATIONAL JOURNAL OF PLASTICITY (2008)
Microstructure-sensitive modeling of polycrystalline IN 100
Mahesh Shenoy et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2008)
Benchmark experiments and characteristic cyclic plasticity deformation
Yanyao Jiang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2008)
Cyclic deformation mechanisms of precipitation-hardened Inconel 718 superalloy
L. Xiao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Gamma double prime precipitation kinetic in Alloy 718
A. Devaux et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Flow behavior and microstructures of superalloy 718 during high temperature deformation
Y. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Ratcheting behaviour and mean stress considerations in uniaxial low-cycle fatigue of Inconel 718 at 649 °C
S. J. Park et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2007)
Investigation of ratcheting characteristics of modified 9Cr-1 Mo steel by using the Chaboche constitutive model
Gyeong-Hoi Koo et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2007)
Analysis of the hysteresis loops of a martensitic steel -: Part I:: Study of the influence of strain amplitude and temperature under pure fatigue loadings using an enhanced stress partitioning method
B. Fournier et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Uniaxial ratcheting and failure behaviors of two steels
GZ Kang et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2005)
Effect of strain rate on high-temperature low-cycle fatigue of 17-4 PH stainless steels
JH Wu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Ratchetting of viscoplastic material with cyclic softening, part 1: experiments on modified 9Cr-1Mo steel
M Yaguchi et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2005)
Ratchetting of viscoplastic material with cyclic softening, part 2: application of constitutive models
M Yaguchi et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2005)
A visco-plastic constitutive model for ratcheting of cyclically stable materials and its finite element implementation
GZ Kang
MECHANICS OF MATERIALS (2004)
Effect of boron on the low-cycle fatigue behavior and deformation structure of INCONEL 718 at 650 ○C
L Xiao et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2004)
Kear-Wilsdorf locks and the formation of antiphaseboundary tubes in L12 alloys
PB Hirsch
PHILOSOPHICAL MAGAZINE (2003)
Creep strain and creep-life prediction for Alloy 718 using the omega method
JT Yeom et al.
METALS AND MATERIALS INTERNATIONAL (2003)
Number of grains necessary to homogenize elastic materials with cubic symmetry
M Nygards
MECHANICS OF MATERIALS (2003)
An advancement in cyclic plasticity modeling for multiaxial ratcheting simulation
S Bari et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2002)
Fatigue softening of X10CrAl24 ferritic steel
T Kruml et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
Kinematic hardening model suitable for ratchetting with steady-state
M Abdel-Karim et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2000)
Share Paper
