4.7 Review

Degradation mechanism and modeling study on reversible solid oxide cell in dual-mode d A review

Related references

Note: Only part of the references are listed.
Article Nanoscience & Nanotechnology

Mutual Conversion of CO-CO2 on a Perovskite Fuel Electrode with Endogenous Alloy Nanoparticles for Reversible Solid Oxide Cells

Yihang Li et al.

Summary: Researchers demonstrate a high-performing and durable fuel electrode for reversible solid oxide cells (RSOCs) that significantly improves the mutual CO-CO2 conversion kinetics. Their work provides an alternative way to design highly active and durable fuel electrodes for RSOC applications.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Chemistry, Physical

Degradation study of a reversible solid oxide cell (rSOC) short stack using distribution of relaxation times (DRT) analysis

Suhas Nuggehalli Sampathkumar et al.

Summary: This study tested a five-cell reversible solid oxide cell short stack and conducted cyclic durability testing. The results showed that the voltage degradation rate and fuel/steam utilization of the rSOC varied in different modes, and the post-cycle steady-state degradation rate indicated an improved lifetime.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Article Chemistry, Physical

A mechanistic damage model for solid oxide fuel cell ceramic materials-Part I: Constitutive modeling

Ba Nghiep Nguyen et al.

Summary: A multiscale mechanistic damage model for solid oxide fuel cell (SOFC) ceramics that incorporates micromechanics and continuum damage mechanics (CDM) is developed to study the damage evolution and failure mechanisms. The model considers the effects of material porosity change, microcracking, and volumetric swelling due to redox cycling. Pores and microcracks are modeled as randomly distributed ellipsoidal inclusions, and the evolution of microcracking damage is described using a CDM formulation. The proposed model has significant implications for understanding the mechanical behavior of SOFC stacks under redox cycling and normal operation.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Article Chemistry, Physical

Modeling and evaluation of sintered microstructure and its properties for rSOFC fuel electrodes by coarse-grained molecular dynamics

Chao Yang et al.

Summary: Degradation is a major issue affecting rSOFC performance, with defects on electrode microstructure possibly related to thermal stress. A bottom-up modeling approach using CG-MD is developed to simulate the sintering process of material particles, evaluating various properties and studying the effects of material composition, sintered temperature, pressure, and nanoparticle size.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Energy & Fuels

Performance and Degradation of Electrolyte-Supported Single Cell Composed of Mo-Au-Ni/GDC Fuel Electrode and LSCF Oxygen Electrode during High Temperature Steam Electrolysis

Vaibhav Vibhu et al.

Summary: Ni-gadolinia-doped ceria (GDC) based electrode materials have attracted attention due to their mixed ionic conductivity and high electronic and catalytic activity. However, prolonged operation can result in Ni migration.

ENERGIES (2022)

Article Thermodynamics

Modeling and control-oriented thermal safety analysis for mode switching process of reversible solid oxide cell system

Guoqiang Liu et al.

Summary: A dynamic model of a reversible solid oxide cell system was developed in this study, and the influence of different operating parameters on temperature distribution was investigated. The results showed that adjusting the air excess ratio and fuel utilization had minimal effects on the local temperature gradient, while the maximum PEN temperature was mainly affected by the air excess ratio.

ENERGY CONVERSION AND MANAGEMENT (2022)

Article Chemistry, Physical

Exchange current density of reversible solid oxide cell electrodes

Takuro Fukumoto et al.

Summary: Reversible solid oxide cells (r-SOCs) have high efficiency for power generation and hydrogen generation, making them important for supporting renewable energy. The exchange current density is a crucial parameter for quantifying electrode performance. This study investigates the microstructure and apparent exchange current density of different fuel and air electrodes under varying temperature, fuel humidification, and oxygen concentration conditions.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Article Chemistry, Physical

A modeling study of lifetime and performance improvements of solid oxide fuel cell by reversed pulse operation

Omid Babaie Rizvandi et al.

Summary: This paper investigates the effects of reversed pulse operation on alleviating chromium poisoning of the air electrode in solid oxide cells (SOCs). The study shows that longer operation times under electrolysis mode, cyclic operation starting from the beginning, and lower electrolysis current densities can increase cell lifetime, total power, and hydrogen production. The research provides a computational framework for assessing and quantifying the increased profitability of SOCs operating under co-production through reversed pulse operation.

JOURNAL OF POWER SOURCES (2022)

Article Nanoscience & Nanotechnology

Mutual Conversion of CO-CO2 on a Perovskite Fuel Electrode with Endogenous Alloy Nanoparticles for Reversible Solid Oxide Cells

Yihang Li et al.

Summary: A high-performing and durable fuel electrode consisting of redox-stable Sr-2(Fe, Mo)2O6-delta perovskite oxide and epitaxially endogenous NiFe alloy nanoparticles is demonstrated for improving mutual CO-CO2 conversion kinetics in RSOCs, achieving reliable reversible CO-CO2 conversion without performance degradation in 20 cycles.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Materials Science, Ceramics

Application of a negative thermal expansion oxide in SOFC cathode

Fei Lu et al.

Summary: The addition of negative thermal expansion oxide in the cathode of solid oxide fuel cells can significantly improve their electrochemical performance, leading to a substantial increase in peak power density and a decrease in relative increment between 500-750 degrees Celsius.

CERAMICS INTERNATIONAL (2021)

Article Chemistry, Physical

A highly efficient and durable air electrode for intermediate-temperature reversible solid oxide cells

Weilin Zhang et al.

Summary: This study introduces a novel bifunctional air electrode material, PrBa0.9Co1.96Nb0.04O5+delta, that demonstrates outstanding electrochemical performance and excellent stability due to improved stability from Nb doping and enhanced electrocatalytic activity from tuning Ba deficiency.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Article Thermodynamics

Dynamic modelling of reversible solid oxide cells for grid stabilization applications

Konrad Motylinski et al.

Summary: This study develops a dynamic model of a system based on a reversible solid oxide cell (rSOC) and investigates its application in power balancing. Simulation results demonstrate that the rSOC system can achieve continuous energy balancing when switching between different operational modes, operating safely within predefined limits.

ENERGY CONVERSION AND MANAGEMENT (2021)

Article Chemistry, Physical

Long-term operation of a solid oxide fuel cell with MoNi-CeO2 as anode directly fed by biogas containing simultaneously sulphur and siloxane

M. J. Escudero et al.

Summary: The study demonstrates that the MoNi-Ce anode exhibits high tolerance to the co-presence of H2S and D4 in biogas and good resistance to carbon deposition.

JOURNAL OF POWER SOURCES (2021)

Article Electrochemistry

Long-Term Experience with a 5/15kW-Class Reversible Solid Oxide Cell System

Ro. Peters et al.

Summary: A 5/15 kW-class reversible Solid Oxide Cell system was developed and tested, achieving high efficiency and stable operation with the Julich Integrated Module as the main component.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Article Chemistry, Physical

A highly active and carbon-tolerant anode decorated with in situ grown cobalt nano-catalyst for intermediate-temperature solid oxide fuel cells

Chunming Xu et al.

Summary: This study introduces a novel anode material, Sr1.95Fe1.4Co0.1Mo0.5O6-δ (SFCoM), designed for intermediate-temperature solid oxide fuel cells (IT-SOFCs), which exhibits enhanced electrocatalytic activity and resistance to carbon deposition. By combining A-site defect regulation and B-site doping, the in-situ exsolved Co nanoparticle greatly improves the performance of the anode material, leading to promising potential for high-performance IT-SOFC anodes.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Article Electrochemistry

Damage Modeling of Solid Oxide Fuel Cells Accounting for Redox Effects

Ba Nghiep Nguyen et al.

Summary: This study applied a multiscale mechanistic damage model to investigate progressive damage in solid oxide fuel cells under various operating conditions, including redox effects. The model effectively captured irreversible volumetric swelling and microcracking influences on material damage, validated through numerical simulations.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Article Electrochemistry

Degradation Analysis of Long-Term Solid Oxide Fuel Cell Stacks with Respect to Chromium Poisoning in La0.58Sr0.4Co0.2Fe0.8O3-δ and La0.6Sr0.4CoO3-δ Cathodes

Qingping Fang et al.

Summary: It has been found that the LSC cathode shows more promising results in SOFCs compared to the LSCF cathode, with higher ionic conductivity and better resistance to chromium poisoning. Through long-term stack operation and various analyses, the degradation behavior of the stack due to chromium poisoning can be evaluated.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Article Materials Science, Ceramics

Effect of optimal GDC loading on long-term stability of La0.8Sr0.2Co0.2Fe0.8O3-δ/Gd0.2Ce0.8O1.9 composite cathodes

Dong Li et al.

Summary: Three types of La0.8Sr0.2Co0.2Fe0.8O3-delta/Gd0.2Ce0.8O1.9 (LSCF/GDC) composite cathodes with different optimal GDC loading were prepared, and their stability was tested by applying constant current polarization for 144 hours. The composite cathode with pore-forming treatment showed the smallest increase in polarization resistance after testing.

CERAMICS INTERNATIONAL (2021)

Article Chemistry, Physical

Efficient and controlled nano-catalyst solid-oxide fuel cell electrode infiltration with poly-norepinephrine surface modification

O. Ozmen et al.

Summary: This study demonstrates the enhanced efficiency and microstructural control of nano-catalyst infiltration in SOFC electrodes through pNE treatment. The results show that the nano-CeO2 film reduces degradation of the backbone and the pNE-assisted dip infiltration enhances infiltrant deposition efficiency.

JOURNAL OF POWER SOURCES (2021)

Article Chemistry, Physical

Multiscale modeling of degradation of full solid oxide fuel cell stacks

Omid Babaie Rizvandi et al.

Summary: The study presents a multiscale three-dimensional model for simulating the degradation of solid oxide fuel cell stacks, integrating various degradation phenomena to explore optimal operating conditions, validating with experimental data, and investigating the effects of operation modes, conditions, and configurations on the long-term performance of the stack. Results demonstrate that certain factors such as potentiostatic operation mode and flow configuration can improve the long-term performance of the stack.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Chemistry, Physical

A highly active and stable hybrid oxygen electrode for reversible solid oxide cells

Zhe Zhao et al.

Summary: A nanostructured hybrid material with BaZr0.2Co0.8O3-delta composition has been developed as an oxygen electrode for reversible solid oxide cells, showing high current density and stability in SOFC and SOEC modes with no obvious degradation after 100 cycles.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Review Chemistry, Physical

Solid oxide fuel cell (SOFC) performance evaluation, fault diagnosis and health control: A review

Jingxuan Peng et al.

Summary: Solid oxide fuel cells are a promising alternative energy source for new energy vehicles, distributed power generation, and military equipment, offering advantages such as high efficiency, low noise, low emission, and flexible fuel. To commercialize them effectively, performance evaluation, fault diagnosis, and health control strategies are essential for improving cell performance and ensuring efficient and stable operation.

JOURNAL OF POWER SOURCES (2021)

Review Thermodynamics

Continuum scale modelling and complementary experimentation of solid oxide cells

Steven B. Beale et al.

Summary: Solid oxide cells are a promising technology for energy conversion, capable of converting hydrogen-rich fuels into electrical energy or storing energy from transient resources. To compete in the market, improving reliability, extending product lifecycles, and reducing costs are essential. Mathematical models provide insights into physical phenomena and performance, but accurate parameterization and validation through experimental methods are crucial for model reliability.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2021)

Review Green & Sustainable Science & Technology

Air electrodes and related degradation mechanisms in solid oxide electrolysis and reversible solid oxide cells

M. S. Khan et al.

Summary: This paper reviews the degradation behavior of different air electrodes in solid oxide electrolysis cells (SOECs) and reversible solid oxide cells (RSOCs), with a focus on air electrode delamination mechanisms and potential solutions. Dependencies between different materials during SOEC operation are analyzed, as well as recommendations for future degradation studies and development of more active and stable air electrodes.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Article Thermodynamics

Morphology and performance evolution of anode microstructure in solid oxide fuel cell: A model-based quantitative analysis

Yang Wang et al.

Summary: The study conducted a model-based quantitative analysis to investigate the influences of Ni coarsening on SOFC performance, highlighting the importance of Ni content and providing an optimal range of Ni content for maintaining low overpotential.

APPLICATIONS IN ENERGY AND COMBUSTION SCIENCE (2021)

Article Chemistry, Physical

Reversible operation performance of microtubular solid oxide cells with a nickelate-based oxygen electrode

M. A. Morales-Zapata et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Review Materials Science, Multidisciplinary

Degradation of solid oxide electrolysis cells: Phenomena, mechanisms, and emerging mitigation strategies-A review

Yi Wang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Article Energy & Fuels

Effect of interface morphology on the residual stress distribution in solid oxide fuel cell

Qiangqiang Li et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2020)

Article Chemistry, Physical

3D thermo-electro-chemo-mechanical coupled modeling of solid oxide fuel cell with double-sided cathodes

Congying Jiang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Article Chemistry, Physical

Long-term operation of solid oxide fuel cells and preliminary findings on accelerated testing

Ludger Blum et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Article Chemistry, Inorganic & Nuclear

Characterizing transport mechanism of cathodic oxygen ions in SOFC by molecular dynamics

Hsin-Yi Lai et al.

JOURNAL OF SOLID STATE CHEMISTRY (2020)

Article Nanoscience & Nanotechnology

Redox-Reversible Electrode Material for Direct Hydrocarbon Solid Oxide Fuel Cells

Peng Qu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Physical

A double perovskite decorated carbon-tolerant redox electrode for symmetrical SOFC

Xianzhu Peng et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Article Chemistry, Physical

Thermal shock resistant solid oxide fuel cell ceramic composite electrolytes

Hagay Hayun et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Article Chemistry, Physical

Reversible, all-perovskite SOFCs based on La, Sr gallates

Antonella Glisenti et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Article Chemistry, Physical

A multiscale-architecture solid oxide fuel cell fabricated by electrophoretic deposition technique

Delaram Salehzadeh et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Review Chemistry, Physical

Materials for reversible solid oxide cells

Mogens B. Mogensen

CURRENT OPINION IN ELECTROCHEMISTRY (2020)

Article Energy & Fuels

Multiscale Modeling for Reversible Solid Oxide Cell Operation

Fiammetta Rita Bianchi et al.

ENERGIES (2020)

Article Thermodynamics

Mechanical response of nickel-based anodes in solid oxide fuel cells during carbon deposition using reaction molecular dynamics

Lu Haibin et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

Article Chemistry, Physical

Anti-carbon deposition mechanism of H2O on nickel-based anode of SOFC: A ReaxFF molecular modelling

Sheng Wu et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Article Chemistry, Physical

Long term durability test and post mortem for metal-supported solid oxide electrolysis cells

Fengyu Shen et al.

JOURNAL OF POWER SOURCES (2020)

Article Electrochemistry

Degradation Analysis of an SOFC Short Stack Subject to 10,000 h of Operation

Qingping Fang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Article Chemistry, Physical

Dynamic modelling and performance analysis of reversible solid oxide fuel cell with syngas

Chao Yang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Article Chemistry, Physical

Effect of the geometrical size on time dependent failure probability of the solid oxide fuel cell

Yu-Cai Zhang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Article Engineering, Chemical

Dynamic Modeling of Reversible Solid Oxide Cells

Lukas Wehrle et al.

CHEMIE INGENIEUR TECHNIK (2019)

Article Thermodynamics

Dynamic modeling of reversible solid oxide cell stack and control strategy development

G. Botta et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

Article Materials Science, Ceramics

Characterization of Sr2Fe1.5Mo0.5O6-δ-Gd0.1Ce0.9O1.95 symmetrical electrode for reversible solid oxide cells

Yangyang Guo et al.

CERAMICS INTERNATIONAL (2019)

Article Chemistry, Physical

A strontium-free and iron-based oxygen electrode for solid-oxide electrochemical cells (SOCs)

Qimiao Zeng et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Article Chemistry, Physical

Effect of frame material on the creep of solid oxide fuel cell

Yu Wang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Article Chemistry, Physical

Highly carbon- and sulfur-tolerant Sr2TiMoO6-δ double perovskite anode for solid oxide fuel cells

Bingbing Niu et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Article Chemistry, Physical

Structural evolution of carbon deposition on a Ni/YSZ cermet of a SOFC analyzed by soft x-ray XANES spectroscopy

Hirotatsu Watanabe et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Article Chemistry, Physical

Redox stability of metal-supported fuel cells with nickel/gadolinium-doped ceria anode

Florian Thaler et al.

JOURNAL OF POWER SOURCES (2019)

Review Energy & Fuels

Reversible solid oxide systems for energy and chemical applications-Review & perspectives

Vikrant Venkataraman et al.

JOURNAL OF ENERGY STORAGE (2019)

Article Chemistry, Physical

Increased performance by use of a mixed conducting buffer layer, terbia-doped ceria, for Nd2NiO4+δ SOFC/SOEC oxygen electrodes

Devaraj Ramasamy et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Article Chemistry, Physical

Progress in durability of metal-supported solid oxide fuel cells with infiltrated electrodes

Emir Dogdibegovic et al.

JOURNAL OF POWER SOURCES (2019)

Article Chemistry, Physical

Threshold catalytic onset of carbon formation on CeO2 during CO2 electrolysis: mechanism and inhibition

Jiayue Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Article Electrochemistry

Chemo-Thermo-Mechanical Coupling in Protonic Ceramic Fuel Cells from Fabrication to Operation

Alexis Dubois et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Article Multidisciplinary Sciences

Mesoscience: exploring the common principle at mesoscales

Wenlai Huang et al.

NATIONAL SCIENCE REVIEW (2018)

Article Materials Science, Multidisciplinary

Anisotropic sintering behavior of freeze-cast ceramics by optical dilatometry and discrete-element simulations

Aaron Lichtner et al.

ACTA MATERIALIA (2018)

Article Chemistry, Physical

Density functional theory study for the enhanced sulfur tolerance of Ni catalysts by surface alloying

Bohyun Hwang et al.

APPLIED SURFACE SCIENCE (2018)

Article Materials Science, Ceramics

Analysis of the thermal-mechanical redox stability of Nb2TiO7 and Nb1.33Ti0.67O4 for SOFC application

T. Thomas et al.

CERAMICS INTERNATIONAL (2018)

Article Materials Science, Ceramics

Mechanical characterization of SOFC/SOEC cells

J. Wei et al.

CERAMICS INTERNATIONAL (2018)

Article Electrochemistry

Sulphur poisoning of solid oxide electrolysis cell anodes

Cheng Cheng Wang et al.

ELECTROCHIMICA ACTA (2018)

Article Energy & Fuels

Multidimensional Reversible Solid Oxide Fuel Cell Modeling for Embedded Applications

Rui Ma et al.

IEEE TRANSACTIONS ON ENERGY CONVERSION (2018)

Article Thermodynamics

Molecular dynamics simulations of the coke formation progress on the nickel-based anode of solid oxide fuel cells

Haibin Lu et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2018)

Article Chemistry, Physical

Improving sulfur tolerance of Ni-YSZ anodes of solid oxide fuel cells by optimization of microstructure and operating conditions

Muhammad Taqi Mehran et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Article Chemistry, Physical

Effect of operating temperature on creep and damage in the bonded compliant seal of planar solid oxide fuel cell

Yu-Cai Zhang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Article Chemistry, Physical

Safe heating-up of a full scale SOFC system using 3D multiphysics modelling optimisation

M. Peksen

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Article Chemistry, Physical

Modelling of anode delamination in solid oxide electrolysis cell and analysis of its effects on electrochemical performance

Marko Nerat et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Article Engineering, Electrical & Electronic

Effects of Zr doping on the phase composition, crystal structure and ionic conductivity of (Zr, Al)-doped lanthanum germinates

Qingle Shi et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2018)

Article Chemistry, Physical

Quantification of the degradation of Ni-YSZ anodes upon redox cycling

Bowen Song et al.

JOURNAL OF POWER SOURCES (2018)

Article Chemistry, Physical

Carbon deposition and sulfur poisoning during CO2 electrolysis in nickel based solid oxide cell electrodes

Theis Loye Skafte et al.

JOURNAL OF POWER SOURCES (2018)

Article Chemistry, Physical

Localized carbon deposition in solid oxide electrolysis cells studied by multiphysics modeling

Maria Navasa et al.

JOURNAL OF POWER SOURCES (2018)

Article Chemistry, Physical

Thermal stress analysis of sulfur deactivated solid oxide fuel cells

Shumao Zeng et al.

JOURNAL OF POWER SOURCES (2018)

Article Chemistry, Physical

Impact of Nickel agglomeration on Solid Oxide Cell operated in fuel cell and electrolysis modes

M. Hubert et al.

JOURNAL OF POWER SOURCES (2018)

Article Electrochemistry

Investigation of rate-determining step of LaNi0.6Co0.4O3-δ film electrode

R. A. Budiman et al.

JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2018)

Article Electrochemistry

A Detailed Post Mortem Analysis of Solid Oxide Electrolyzer Cells after Long-Term Stack Operation

Carolin E. Frey et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Review Thermodynamics

Macroscopic modeling of solid oxide fuel cell (SOFC) and model-based control of SOFC and gas turbine hybrid system

Cheng Bao et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2018)

Article Electrochemistry

Thermally Driven SOFC Degradation in 4D: Part I. Microscale

T. M. M. Heenan et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Article Energy & Fuels

Modeling cooperative creep reoxidation effect on the mechanical stability of anode-supported solid oxide fuel cell

Shuaipeng Shang et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2018)

Article Energy & Fuels

Multi-objective modeling, uncertainty analysis, and optimization of reversible solid oxide cells

Zahra Salehi et al.

INTERNATIONAL JOURNAL OF ENERGY AND ENVIRONMENTAL ENGINEERING (2018)

Article Electrochemistry

Modeling of Gas Diffusion in Ni/YSZ Electrodes in CO2 and Co-electrolysis

J. Dragsbaek Duhn et al.

FUEL CELLS (2017)

Article Materials Science, Ceramics

Dimensional analysis of Ni-NiO grains at anode/electrolyte interface for SOFC during redox reaction

Bo Liang et al.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2017)

Article Chemistry, Physical

CFD-simulation of effective carbon gasification strategies from high temperature SOFC Ni-YSZ cermet anodes

C. Schluckner et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Article Chemistry, Physical

Simulation of a reversible SOFC with Aspen Plus

Maximilian Hauck et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Article Energy & Fuels

Dynamic Processes of Mode Switching in Reversible Solid Oxide Fuel Cells

Yi Zheng et al.

JOURNAL OF ENERGY ENGINEERING (2017)

Article Chemistry, Physical

Reversible solid oxide fuel cell for natural gas/renewable hybrid power generation systems

Yu Luo et al.

JOURNAL OF POWER SOURCES (2017)

Article Energy & Fuels

Dynamic Processes of Mode Switching in Reversible Solid Oxide Fuel Cells

Yi Zheng et al.

JOURNAL OF ENERGY ENGINEERING (2017)

Proceedings Paper Electrochemistry

Ceramic Fuel Electrodes for Reversible Solid Oxide Cells Operating on Carbon Dioxide

S. Balomenou et al.

SOLID OXIDE FUEL CELLS 15 (SOFC-XV) (2017)

Article Chemistry, Physical

CH4 internal dry reforming over a Ni/YSZ/ScSZ anode catalyst in a SOFC: A transient kinetic study

Wenbin Yin et al.

CATALYSIS COMMUNICATIONS (2017)

Article Materials Science, Ceramics

Crystal structure, thermal expansion and electrical conduction behavior of PrNi1-xFexO3-δ at high temperature

Kazuhiro Kurata et al.

JOURNAL OF THE CERAMIC SOCIETY OF JAPAN (2017)

Article Electrochemistry

Nanocrystalline cathode functional layer for SOFC

Aleksander Chrzan et al.

ELECTROCHIMICA ACTA (2017)

Article Engineering, Environmental

Sulfur poisoning in Ni-anode solid oxide fuel cells (SOFCs): Deactivation in single cells and a stack

Davide Papurello et al.

CHEMICAL ENGINEERING JOURNAL (2016)

Article Chemistry, Physical

Computational analysis of IR-SOFC: Transient, thermal stress, carbon deposition and flow dependency

Tushar Choudhary et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)

Article Chemistry, Physical

A novel Ni/ceria-based anode for metal-supported solid oxide fuel cells

Veronika A. Rojek-Woeckner et al.

JOURNAL OF POWER SOURCES (2016)

Article Electrochemistry

Strategy for Carbon Gasification from Porous Ni-YSZ Anodes of Industrial-Sized ASC-SOFCs and Effects of Carbon Growth

Vanja Subotic et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)

Article Electrochemistry

Defect-Transport-Induced Stress in Mixed Ionic-Electronic Conducting (MIEC) Ceramic Membranes

Bryan Euser et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)

Article Electrochemistry

Meso-Scale Phase-Field Modeling of Microstructural Evolution in Solid Oxide Fuel Cells

Taufiq Abdullah et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)

Review Green & Sustainable Science & Technology

Current developments in reversible solid oxide fuel cells

Sergio Yesid Gomez et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Proceedings Paper Electrochemistry

Carbon and Redox Tolerant Infiltrated Oxide Fuel-Electrodes for Solid Oxide Cells

T. L. Skafte et al.

IONIC AND MIXED CONDUCTING CERAMICS 10 (2016)

Article Materials Science, Ceramics

La2NiO4+δ as oxygen electrode in reversible solid oxide cells

Young-Sung Yoo et al.

CERAMICS INTERNATIONAL (2015)

Article Engineering, Environmental

Reversible operation of solid oxide cells under electrolysis and fuel cell modes: Experimental study and model validation

Domenico Ferrero et al.

CHEMICAL ENGINEERING JOURNAL (2015)

Article Chemistry, Physical

Electrochemistry of La0.3Sr0.7Fe0.7Cr0.3O3-δ as an oxygen and fuel electrode for RSOFCs

Beatriz Molero-Sanchez et al.

FARADAY DISCUSSIONS (2015)

Article Chemistry, Physical

High performance La0.3Ca0.7Cr0.3Fe0.7O3-δ air electrode for reversible solid oxide fuel cell applications

Beatriz Molero-Sanchez et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)

Article Electrochemistry

Performance and Degradation of Solid Oxide Electrolysis Cells in Stack

Q. Fang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

Review Thermodynamics

Numerical thermomechanical modelling of solid oxide fuel cells

Murat Peksen

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2015)

Review Materials Science, Multidisciplinary

Progress in material selection for solid oxide fuel cell technology: A review

Neelima Mahato et al.

PROGRESS IN MATERIALS SCIENCE (2015)

Article Chemistry, Physical

Electrochemistry of La0.3Sr0.7Fe0.7Cr0.3O3-δ as an oxygen and fuel electrode for RSOFCs

Beatriz Molero-Sanchez et al.

FARADAY DISCUSSIONS (2015)

Article Chemistry, Multidisciplinary

Numerical analysis of thermal stresses in a new design of microtubular stack

Paulina Pianko-Oprych et al.

OPEN CHEMISTRY (2015)

Article Chemistry, Physical

Eliminating degradation in solid oxide electrochemical cells by reversible operation

Christopher Graves et al.

NATURE MATERIALS (2015)

Proceedings Paper Electrochemistry

Analysis of Porosity and Tortuosity in a 2D Selected Region of Solid Oxide Fuel Cell Cathode Using the Lattice Boltzmann Method

M. Espinoza et al.

FUEL CELL SEMINAR & ENERGY EXPOSITION 2014 (2015)

Article Chemistry, Physical

Derivation of coarse-grained potentials via multistate iterative Boltzmann inversion

Timothy C. Moore et al.

JOURNAL OF CHEMICAL PHYSICS (2014)

Article Chemistry, Physical

ReaxFF Reactive Force-Field Modeling of the Triple-Phase Boundary in a Solid Oxide Fuel Cell

Boris V. Merinov et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)

Article Chemistry, Physical

Creep rupture of the joint of a solid oxide fuel cell glass-ceramic sealant with metallic interconnect

Chih-Kuang Lin et al.

JOURNAL OF POWER SOURCES (2014)

Article Chemistry, Physical

Deactivation of nickel-based anode in solid oxide fuel cells operated on carbon-containing fuels

Jie Xiao et al.

JOURNAL OF POWER SOURCES (2014)

Article Electrochemistry

Carbon Deposition in Solid Oxide Cells during Co-Electrolysis of H2O and CO2

Youkun Tao et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)

Article Chemistry, Physical

A Raman spectroscopic study of the carbon deposition mechanism on Ni/CGO electrodes during CO/CO2 electrolysis

V. Duboviks et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)

Article Engineering, Environmental

Durability of anode supported Solid Oxides Fuel Cells (SOFC) under direct dry-reforming of methane

A. Lanzini et al.

CHEMICAL ENGINEERING JOURNAL (2013)

Article Chemistry, Physical

Fabrication and characterization of functionally-graded LSCF cathodes by tape casting

Ze Liu et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)

Article Chemistry, Physical

3D thermomechanical behaviour of solid oxide fuel cells operating in different environments

M. Peksen

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)

Article Chemistry, Physical

Micro modelling of solid oxide electrolysis cell: From performance to durability

E. Lay-Grindler et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)

Article Chemistry, Physical

Long-term tests of a Julich planar short stack with reversible solid oxide cells in both fuel cell and electrolysis modes

Van Nhu Nguyen et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)

Review Chemistry, Physical

A review and comprehensive analysis of degradation mechanisms of solid oxide electrolysis cells

Philippe Mocoteguy et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)

Article Chemistry, Physical

Creep analysis of solid oxide fuel cell with bonded compliant seal design

Wenchun Jiang et al.

JOURNAL OF POWER SOURCES (2013)

Article Electrochemistry

Microstructural Degradation of Ni/YSZ Electrodes in Solid Oxide Electrolysis Cells under High Current

Ming Chen et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)

Article Materials Science, Ceramics

Effects of the microwave heating on the properties of gadolinium-doped cerium oxide prepared by polyol method

A. Gondolini et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2013)

Article Chemistry, Physical

Life testing of LSM-YSZ composite electrodes under reversing-current operation

Gareth A. Hughes et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)

Proceedings Paper Electrochemistry

Chemical Expansion in SOFC Materials: Ramifications, Origins, and Mitigation

S. R. Bishop et al.

SOLID OXIDE FUEL CELLS 13 (SOFC-XIII) (2013)

Proceedings Paper Electrochemistry

Steam Electrolysis in Reversibly Operated SOFC: Long-Term Cell Testing Beyond 1000 h

J. Schefold et al.

HYDROGEN PRODUCTION, CONVERSION AND STORAGE 4 (2013)

Article Chemistry, Multidisciplinary

Sulfur-Tolerant Redox-Reversible Anode Material for Direct Hydrocarbon Solid Oxide Fuel Cells

Chenghao Yang et al.

ADVANCED MATERIALS (2012)

Article Chemistry, Physical

Redox stability and electrochemical study of nickel doped chromites as anodes for H2/CH4-fueled solid oxide fuel cells

Vicente B. Vert et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2012)

Article Chemistry, Physical

Atomic-scale mechanisms of oxygen electrode delamination in solid oxide electrolyzer cells

Sergey N. Rashkeev et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)

Article Chemistry, Physical

A model for the delamination kinetics of La0.8Sr0.2MnO3 oxygen electrodes of solid oxide electrolysis cells

Yanxiang Zhang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)

Article Chemistry, Physical

LSM-YSZ interactions and anode delamination in solid oxide electrolysis cells

Michael Keane et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)

Article Electrochemistry

Degradation Issues in Solid Oxide Cells During High Temperature Electrolysis

M. S. Sohal et al.

JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY (2012)

Article Electrochemistry

Numerical Analysis of the Possibility of Carbon Formation in Planar SOFC Fueled With Syngas

Jianguo Yu et al.

JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY (2012)

Article Chemistry, Physical

Impact of direct butane microtubular solid oxide fuel cells

Hirofumi Sumi et al.

JOURNAL OF POWER SOURCES (2012)

Review Chemistry, Physical

Recent advances in high temperature electrolysis using solid oxide fuel cells: A review

M. A. Laguna-Bercero

JOURNAL OF POWER SOURCES (2012)

Article Electrochemistry

Nine Thousand Hours of Operation of a Solid Oxide Cell in Steam Electrolysis Mode

J. Schefold et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)

Article Chemistry, Physical

Effect of strontium concentration on sulfur poisoning of LSCF cathodes

Fangfang Wang et al.

SOLID STATE IONICS (2012)

Review Chemistry, Physical

Solid Oxide Fuel Cell Anode Materials for Direct Hydrocarbon Utilization

Xiao-Ming Ge et al.

ADVANCED ENERGY MATERIALS (2012)

Review Materials Science, Multidisciplinary

Point Defects in Oxides: Tailoring Materials Through Defect Engineering

Harry L. Tuller et al.

ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 41 (2011)

Article Chemistry, Physical

A coupled 3D thermofluid-thermomechanical analysis of a planar type production scale SOFC stack

M. Peksen

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)

Article Chemistry, Physical

Failure mechanism of (La,Sr)MnO3 oxygen electrodes of solid oxide electrolysis cells

Kongfa Chen et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)

Article Chemistry, Physical

Pore-scale modeling of the reactive transport of chromium in the cathode of a solid oxide fuel cell

E. M. Ryan et al.

JOURNAL OF POWER SOURCES (2011)

Article Chemistry, Physical

Simulation of coarsening in three-phase solid oxide fuel cell anodes

Hsun-Yi Chen et al.

JOURNAL OF POWER SOURCES (2011)

Review Chemistry, Multidisciplinary

Symmetric and reversible solid oxide fuel cells

Juan Carlos Ruiz-Morales et al.

RSC ADVANCES (2011)

Article Materials Science, Multidisciplinary

In situ redox cycle of a nickel-YSZ fuel cell anode in an environmental transmission electron microscope

Q. Jeangros et al.

ACTA MATERIALIA (2010)

Article Chemistry, Multidisciplinary

A Novel Electrode Material for Symmetrical SOFCs

Qiang Liu et al.

ADVANCED MATERIALS (2010)

Article Chemistry, Physical

Computational fluid dynamics analysis of solid oxide electrolysis cells with delaminations

Xinfang Jin et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)

Article Chemistry, Physical

Perovskite Sr2Fe1.5Mo0.5O6-δ as electrode materials for symmetrical solid oxide electrolysis cells

Qiang Liu et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)

Article Chemistry, Physical

Mechanism of oxygen electrode delamination in solid oxide electrolyzer cells

Anil V. Virkar

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)

Article Chemistry, Physical

Thermal stresses in an operating micro-tubular solid oxide fuel cell

Mustafa Fazil Serincan et al.

JOURNAL OF POWER SOURCES (2010)

Article Electrochemistry

Degradation Mechanism in La0.8Sr0.2CoO3 as Contact Layer on the Solid Oxide Electrolysis Cell Anode

Vivek Inder Sharma et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2010)

Article Electrochemistry

Poisoning of Solid Oxide Electrolysis Cells by Impurities

Sune D. Ebbesen et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2010)

Article Chemistry, Physical

A DFT study on the removal of adsorbed sulfur from a nickel(111) surface: Reducing anode poisoning

Natasha M. Galea et al.

JOURNAL OF CATALYSIS (2009)

Article Chemistry, Physical

Solid Oxide Fuel Cells damage mechanisms due to Ni-YSZ re-oxidation: Case of the Anode Supported Cell

J. Laurencin et al.

JOURNAL OF POWER SOURCES (2009)

Article Chemistry, Physical

Effects of GDC interlayer on performance of low-temperature SOFCs

Min Yang et al.

JOURNAL OF POWER SOURCES (2008)

Article Chemistry, Physical

Use of a catalyst layer for anode-supported SOFCs running on ethanol fuel

Xiao-Feng Ye et al.

JOURNAL OF POWER SOURCES (2008)

Article Chemistry, Physical

Micro modeling of solid oxide fuel cell anode based on stochastic reconstruction

Yoshinori Suzue et al.

JOURNAL OF POWER SOURCES (2008)

Article Electrochemistry

Solid oxide electrolysis cells: Microstructure and degradation of the Ni/yttria-stabilized zirconia electrode

A. Hauch et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2008)

Review Chemistry, Physical

A review of numerical modeling of solid oxide fuel cells

Sadik Kakac et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2007)

Article Computer Science, Interdisciplinary Applications

Simulations of reactive transport and precipitation with smoothed particle hydrodynamics

Alexandre M. Tartakovsky et al.

JOURNAL OF COMPUTATIONAL PHYSICS (2007)

Article Chemistry, Physical

Theoretical and experimental investigation of the thermochemistry of CrO2(OH)2(g)

Elizabeth J. Opila et al.

JOURNAL OF PHYSICAL CHEMISTRY A (2007)

Article Chemistry, Physical

Thermal stress analysis of a planar SOFC stack

Chih-Kuang Lin et al.

JOURNAL OF POWER SOURCES (2007)

Article Chemistry, Physical

Lanthanum strontium manganese chromite cathode and anode synthesized by gel-casting for solid oxide fuel cells

San Ping Jiang et al.

JOURNAL OF MATERIALS CHEMISTRY (2007)

Article Electrochemistry

Internal reforming of SOFCs - Carbon deposition on fuel electrode and subsequent deterioration of cell

Tatsuya Iida et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2007)

Article Electrochemistry

Silica segregation in the Ni/YSZ electrode

Anne Hauch et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2007)

Article Chemistry, Physical

A study of carbon formation and prevention in hydrocarbon-fueled SOFC

T Kim et al.

JOURNAL OF POWER SOURCES (2006)

Article Chemistry, Physical

A symmetrical solid oxide fuel cell demonstrating redox stable perovskite electrodes

DM Bastidas et al.

JOURNAL OF MATERIALS CHEMISTRY (2006)

Article Chemistry, Physical

Thermal analysis of the cyclic reduction and oxidation behaviour of SOFC anodes

D Waldbillig et al.

SOLID STATE IONICS (2005)

Article Chemistry, Physical

Evaluation of residual stresses in a SOFC stack

H Yakabe et al.

JOURNAL OF POWER SOURCES (2004)

Article Chemistry, Physical

Study on steam reforming of CH4 and C2 hydrocarbons and carbon deposition on Ni-YSZ cermets

T Takeguchi et al.

JOURNAL OF POWER SOURCES (2002)

Article Engineering, Chemical

Smoothed particle hydrodynamics model for diffusion through porous media

Y Zhu et al.

TRANSPORT IN POROUS MEDIA (2001)

Article Materials Science, Multidisciplinary

Modelling of the agglomeration of Ni-particles in anodes of solid oxide fuel cells

R Vassen et al.

JOURNAL OF MATERIALS SCIENCE (2001)