Journal
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
Volume 195, Issue -, Pages -Publisher
PERGAMON-ELSEVIER SCIENCE LTD
DOI: 10.1016/j.ijheatmasstransfer.2022.123169
Keywords
Baffled micro combustor; Axis-switching phenomenon; Noncircular hole; Efficient combustion; Thermophotovoltaic system; Recirculating flow
Categories
Funding
- Basic Science Research Pro-gram through the National Research Foundation of Korea (NRF) - Ministry of Education [NRF-2016R1D1A1B02012446, 2020R1A6A3A01097105]
- National Research Foundation of Korea [2020R1A6A3A01097105] Funding Source: Korea Institute of Science & Technology Information (KISTI), National Science & Technology Information Service (NTIS)
Ask authors/readers for more resources
This study explores the design of a combustor for a thermophotovoltaic (TPV) generator to strengthen the axis-switching phenomenon. Various simulations and flow field investigations are conducted to analyze the effects of noncircular holes in the combustor on combustion efficiency.
For a thermophotovoltaic (TPV) generator, a combustor design for strengthening the axis-switching phenomenon is explored. Various simulations based on a Reynolds stress model and detailed chemical mechanism of GRI 3.0 are performed for methane (CH4)-air flames in a multihole baffled combustor. The reacting flow fields are investigated with the baffle plates of rotated square and triangular holes. The spreading and merging of multiple air jets past the baffle plate are significantly affected by rotating noncircular air holes. Considering the crossover location changes of the jet half-width, the air jets have a flow structure that quickly generates the axis-switching phenomenon. Compared with the baffled combustor of circular air holes, the center recirculation zone in the combustor of noncircular holes is enlarged by approximately 200% with a hole rotation. As the hole rotation increases, secondary flows become more complicated and the merging of air jets is quickly finished. Based on these flow structures, the region with the stoichiometric condition is observed in various forms of hexagonal, star, circular, and flower shapes. As a result, the flammable region and combustion efficiency are considerably increased. The flame lengths are roughly evaluated as three times the mixing lengths. From the viewpoint of a heat emitter for the TPV application, the heat transfer on the combustion chamber wall is discussed. Compared with the combustor with circular air holes, the combustor with noncircular air holes shows a 5% increase in flammable region and a 5.9% improvement in combustion efficiency. For a combustion-based TPV system, the best uniformity of wall temperature is observed for baffles with 30 degrees-rotated square holes and 15 degrees rotated triangular holes and the highest mean wall temperatures are obtained when the flame length is approximately 1/3 of the combustor length. (C) 2022 Elsevier Ltd. All rights reserved.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available