Journal
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
Volume 196, Issue -, Pages -Publisher
PERGAMON-ELSEVIER SCIENCE LTD
DOI: 10.1016/j.ijheatmasstransfer.2022.123300
Keywords
Attemperator; Spray; Numerical simulation; Droplet size distribution; Droplet evaporation; Droplet breakup
Categories
Funding
- National Research Foundation of Korea (NRF) - Ministry of Education [NRF-2016R1D1A1B04933874]
- Doosan Heavy Industries and Construction Co. Ltd.
Ask authors/readers for more resources
This study numerically simulated droplet breakup and evaporation in different attemperator design configurations, validated the simulation model, and obtained useful design insights. The simulation results showed that controlling droplet size, using a venturi-type thermal liner, and employing multiple nozzles can improve evaporation efficiency.
An attemperator (also called a desuperheater) sprays water into superheated steam to modulate its tem-perature to a desired set point. Here, the sprayed water must evaporate completely before it reaches the thermowell installed downstream of the attemperator, as the amount of water sprayed into the flow varies according to the steam temperature measured by the thermowell. Therefore, to develop optimal attemperator designs, it is vital to accurately predict the evaporation distance of the sprayed water and find suitable methods to reduce this distance. In this study, droplet breakup and evaporation in var-ious attemperator design configurations were numerically simulated in the three-dimensional domain, considering both primary and secondary droplet breakup. The simulation model was validated by com-paring the simulation results of four commissioning conditions with the corresponding transient thermal analysis results from a previous study. Subsequently, four attemperator designs were analyzed using the validated simulation model to obtain useful design insights. The simulation results demonstrated that all droplets should break up into droplets that are below a certain size to ensure complete evaporation. In addition, a venturi-type thermal liner can enhance droplet breakup by accelerating and decelerating the steam flow, resulting in faster droplet evaporation. Finally, the evaporation distance can be reduced by using multiple smaller-sized nozzles, which produce smaller initial droplets.(c) 2022 Elsevier Ltd. All rights reserved.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available