Related references
Note: Only part of the references are listed.Possibility of producing thermal insulation materials from cementitious materials without foaming agent or lightweight aggregate
Alaa M. Rashad
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2022)
Thermal performance of the building envelope integrated with phase change material for thermal energy storage: an updated review
Pushpendra Kumar Singh Rathore et al.
SUSTAINABLE CITIES AND SOCIETY (2022)
Determining the feasibility of using PET bottles as construction material in urban context
Leela Pradeep et al.
MATERIALS TODAY-PROCEEDINGS (2022)
The effect of energy-saving options on environmental performance of a building: a combination of energy audit-life cycle assessment for a university building
Zerrin Gunkaya et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)
Study of a new capillary active bio-insulation material by hygrothermal simulation of multilayer wall
Muhammad Riaz Ahmad et al.
ENERGY AND BUILDINGS (2021)
An overview of factors influencing thermal conductivity of building insulation materials
Le Duong Hung et al.
JOURNAL OF BUILDING ENGINEERING (2021)
Date pits based nanomaterials for thermal insulation applications-Towards energy efficient buildings in Qatar
Moza Ghorab Al Marri et al.
PLOS ONE (2021)
Life-cycle cost analysis of building wall and insulation materials
Dileep Kumar et al.
JOURNAL OF BUILDING PHYSICS (2020)
A review of the challenges posed by the use of vacuum panels in external insulation finishing systems
Marcio Goncalves et al.
APPLIED ENERGY (2020)
An overview of and introduction to current researches on super insulating materials for high-performance buildings
Umberto Berardi et al.
ENERGY AND BUILDINGS (2020)
Physical, mechanical, and microstructural characterisation of an innovative thermal insulating render incorporating silica aerogel
M. Pedroso et al.
ENERGY AND BUILDINGS (2020)
Optimal insulation thickness of common classic and modern exterior walls in different climate zones of Iran
Behnam Rosti et al.
JOURNAL OF BUILDING ENGINEERING (2020)
Optimization approach of passive cool skin technology application for the Building's exterior walls
Yan Ding et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Optimum insulation thicknesses and energy conservation of building thermal insulation materials in Chinese zone of humid subtropical climate
Huakun Huang et al.
SUSTAINABLE CITIES AND SOCIETY (2020)
Comparative analysis of building insulation material properties and performance
Dileep Kumar et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)
Building heating applications with phase change material: A comprehensive review
Yantong Li et al.
JOURNAL OF ENERGY STORAGE (2020)
Preparation and thermophysical performance of diatomite-based composite PCM wallboard for thermal energy storage in buildings
Hang Yu et al.
JOURNAL OF BUILDING ENGINEERING (2020)
Investigation on the contaminant distribution with improved ventilation system in hospital isolation rooms: Effect of supply and exhaust air diffuser configurations
Jinkyun Cho
APPLIED THERMAL ENGINEERING (2019)
Microstructural and Thermo-Physical Characterization of a Water Hyacinth Petiole for Thermal Insulation Particle Board Manufacture
Adela Salas-Ruiz et al.
MATERIALS (2019)
On the Role of External Walls in the Reduction of Energy Demand and the Mitigation of Human Thermal Discomfort
Tomasz Kisilewicz
SUSTAINABILITY (2019)
Optimizing the insulation thickness of external wall by a novel 3E (energy, environmental, economic) method
Ehsan Amiri Rad et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Building envelope design: Multi-objective optimization to minimize energy consumption, global cost and thermal discomfort. Application to different Italian climatic zones
Fabrizio Ascione et al.
ENERGY (2019)
Effectiveness of the thermal mass of external walls on residential buildings for part-time part-space heating and cooling using the state-space method
Jie Deng et al.
ENERGY AND BUILDINGS (2019)
Transparent insulation materials: An overview on past, present and future developments
A. Paneri et al.
SOLAR ENERGY (2019)
Traditional, state-of-the-art and renewable thermal building insulation materials: An overview
Basim Abu-Jdayil et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Evaluation of the optimal thermal insulation thickness for an office building in different climates by means of the basic and modified cost-optimal methodology
Diana D'Agostino et al.
JOURNAL OF BUILDING ENGINEERING (2019)
Optimal Thermal Insulation Thicknesses of External Walls Based on Economic and Ecological Heating Cost
Robert Dylewski
ENERGIES (2019)
Thermo-economic analysis of building energy retrofits using VIP - Vacuum Insulation Panels
Stefano Fantucci et al.
ENERGY AND BUILDINGS (2019)
Innovative use of giant reed and cork residues for panels of buildings in Mediterranean area
Francesco Barreca et al.
RESOURCES CONSERVATION AND RECYCLING (2019)
Life cycle cost analysis for determining optimal insulation thickness in Palestinian buildings
Mohammed F. Alsayed et al.
JOURNAL OF BUILDING ENGINEERING (2019)
Thermal insulation materials based on agricultural residual wheat straw and corn husk biomass, for application in sustainable buildings
Carlos Rojas et al.
SUSTAINABLE MATERIALS AND TECHNOLOGIES (2019)
The economic and environmental combination between building materials and fuel source to improve building energy performance
Rakshit Doddegowdankoppal Muddu et al.
INTERNATIONAL JOURNAL OF AMBIENT ENERGY (2019)
A Review of Transparent Insulation Material (TIM) for building energy saving and daylight comfort
Yanyi Sun et al.
APPLIED ENERGY (2018)
Characterization of the thermal properties of fibrous insulation materials made from recycled textile fibers for building applications: Theoretical and experimental analyses
Amine Tilioua et al.
APPLIED THERMAL ENGINEERING (2018)
Rice husk panels for building applications: Thermal, acoustic and environmental characterization and comparison with other innovative recycled waste materials
C. Buratti et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Optimizing the insulation thickness of walls and roofs of existing buildings based on primary energy consumption, global cost and pollutant emissions
Pengfei Jie et al.
ENERGY (2018)
Wood waste as an alternative thermal insulation for buildings
Ikbal Cetiner et al.
ENERGY AND BUILDINGS (2018)
An exploration of the relationship between improvements in energy efficiency and life-cycle energy and carbon emissions using the BIRDS low-energy residential database
Joshua Kneifel et al.
ENERGY AND BUILDINGS (2018)
A comparison of the environmental impacts of different categories of insulation materials
Callum Hill et al.
ENERGY AND BUILDINGS (2018)
Review on building energy performance improvement using phase change materials
Song Mengjie et al.
ENERGY AND BUILDINGS (2018)
Hygrothermal performance of various Typha-clay composite
Ibrahim Niang et al.
JOURNAL OF BUILDING PHYSICS (2018)
Thermal inertia in buildings: A review of impacts across climate and building use
Stijn Verbeke et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
The use of forest-based materials for the efficient energy of cities: Environmental and economic implications of cork as insulation material
J. Sierra-Perez et al.
SUSTAINABLE CITIES AND SOCIETY (2018)
Impact of Insulation Type and Thickness on the Dynamic Thermal Characteristics of an External Wall Structure
Jihui Yuan
SUSTAINABILITY (2018)
The use of polyurethane for structural and infrastructural engineering applications: A state-of-the-art review
H. M. C. C. Somarathna et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Optimization of the wall thermal insulation characteristics based on the intermittent heating operation
Xi Meng et al.
CASE STUDIES IN CONSTRUCTION MATERIALS (2018)
Mitigation of heat stress risks through building energy efficiency upgrade: a case study of Melbourne, Australia
Morshed Alam et al.
AUSTRALIAN JOURNAL OF CIVIL ENGINEERING (2018)
Potential analysis of a new removable insulation system
Thibault Pflug et al.
ENERGY AND BUILDINGS (2017)
Optimal combination of thermal resistance of insulation materials and primary fuel sources for six climate zones of Japan
Jihui Yuan et al.
ENERGY AND BUILDINGS (2017)
Investigation of efficient parameters on optimum insulation thickness based on theoretical-Taguchi combined method
Nurullah Arslanoglu et al.
ENVIRONMENTAL PROGRESS & SUSTAINABLE ENERGY (2017)
Environmental assessment of a nano-technological aerogel-based panel for building insulation
Aitana Saez de Guinoa et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Impact of external insulation and internal thermal density upon energy consumption of buildings in a temperate climate with four distinct seasons
Junghun Lee et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Passive cooling of buildings with phase change materials using whole-building energy simulation tools: A review
Mohammad Saffari et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Intra-articular injection of expanded autologous bone marrow mesenchymal cells in moderate and severe knee osteoarthritis is safe: a phase I/II study
Mahasen Al-Najar et al.
JOURNAL OF ORTHOPAEDIC SURGERY AND RESEARCH (2017)
Effect of female genital mutilation/cutting; types I and II on sexual function: case-controlled study
Sahar A. Ismail et al.
REPRODUCTIVE HEALTH (2017)
Passive wall cooling panel with phase change material as a cooling agent
Masni A. Majid et al.
GLOBAL CONGRESS ON CONSTRUCTION, MATERIAL AND STRUCTURAL ENGINEERING 2017 (GCOMSE2017) (2017)
Improved sandwich structured ceramic matrix composites with excellent thermal insulation
Yang Wang et al.
COMPOSITES PART B-ENGINEERING (2017)
Review of moisture behavior and thermal performance of polystyrene insulation in building applications
Shanshan Cai et al.
BUILDING AND ENVIRONMENT (2017)
The environmental impact of phenolic foam insulation boards
Danielle Densley Tingley et al.
PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-CONSTRUCTION MATERIALS (2017)
The determination of the most economical combination between external wall and the optimum insulation material in Cameroonian's buildings
Fohagui Fodoup Cyrille Vincelas et al.
JOURNAL OF BUILDING ENGINEERING (2017)
Energy and economic analysis of Vacuum Insulation Panels (VIPs) used in non-domestic buildings
M. Alam et al.
APPLIED ENERGY (2017)
An innovative structural and energy retrofitting system for URM walls using textile reinforced mortars combined with thermal insulation: Mechanical and fire behavior
Thanasis C. Triantafillou et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Effect of nano vacuum insulation panel and nanogel glazing on the energy performance of office building
Muhammad Abdul Mujeebu et al.
APPLIED ENERGY (2016)
A review on the properties of cellulose fibre insulation
Pablo Lopez Hurtado et al.
BUILDING AND ENVIRONMENT (2016)
Microstructure and properties of lightweight fibrous porous mullite ceramics prepared by vacuum squeeze moulding technique
Rubing Zhang et al.
CERAMICS INTERNATIONAL (2016)
Mechanical and thermal performance of concrete and mortar cellular materials containing plastic waste
Jose Luis Ruiz-Herrero et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Energy use and overheating risk of Swedish multi-storey residential buildings under different climate scenarios
Ambrose Dodoo et al.
ENERGY (2016)
Embodied energy of mud concrete block (MCB) versus brick and cement blocks
Chameera Udawattha et al.
ENERGY AND BUILDINGS (2016)
Economic implications of the energy issue: Evidence for a positive non-linear relation between embodied energy and construction cost
Sergio Copiello
ENERGY AND BUILDINGS (2016)
Determination of optimum insulation thickness for building walls by using heating and cooling degree-day values of all Turkey's provincial centers
Nuri Alpay Kurekci
ENERGY AND BUILDINGS (2016)
Experimental and numerical investigation of thermal bridging effects of jointed Vacuum Insulation Panels
Alice Lorenzati et al.
ENERGY AND BUILDINGS (2016)
Overheating risk barriers to energy renovations of single family houses: Multicriteria analysis and assessment
Theofanis Psomas et al.
ENERGY AND BUILDINGS (2016)
Study on ecological cost-effectiveness for the thermal insulation of building external vertical walls in Poland
Robert Dylewski et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Insulation materials for the building sector: A review and comparative analysis
S. Schiavoni et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
Properties of light-weight extruded concrete with hollow glass microspheres
Dmitriy Oreshkin et al.
XXV POLISH - RUSSIAN - SLOVAK SEMINAR -THEORETICAL FOUNDATION OF CIVIL ENGINEERING (2016)
Analysis of perlite and pumice based building insulation materials
Serdar Celik et al.
JOURNAL OF BUILDING ENGINEERING (2016)
Building envelope with a new aerogel-based insulating rendering: Experimental and numerical study, cost analysis, and thickness optimization
Mohamad Ibrahim et al.
APPLIED ENERGY (2015)
Hygrothermal performance of wood-hemp insulation in timber frame wall panels with and without a vapour barrier
Eshrar Latif et al.
BUILDING AND ENVIRONMENT (2015)
Thermal performance of a selection of insulation materials suitable for historic buildings
Rosanne Walker et al.
BUILDING AND ENVIRONMENT (2015)
Air exchange rates from atmospheric CO2 daily cycle
Joao Dias Carrilho et al.
ENERGY AND BUILDINGS (2015)
On the use of plug-and-play walls (PPW) for evaluating thermal enhancement technologies for building enclosures: Evaluation of a thin phase change material (PCM) layer
Kyoung Ok Lee et al.
ENERGY AND BUILDINGS (2015)
Diurnal thermal analysis of microencapsulated PCM-concrete composite walls
Alexander M. Thiele et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Minimization of thermal insulation thickness taking into account condensation on external walls
Nurettin Yamankaradeniz
ADVANCES IN MECHANICAL ENGINEERING (2015)
Thermal Transmittance and the Embodied Energy of Timber Frame Lightweight Walls Insulated with Straw and Reed
M. Miljan et al.
2ND INTERNATIONAL CONFERENCE ON INNOVATIVE MATERIALS, STRUCTURES AND TECHNOLOGIES (2015)
Insulating glazing units with silica aerogel granules: The impact of particle size
Tao Gao et al.
APPLIED ENERGY (2014)
An environmentally friendly thermal insulation material from sunflower stalk, textile waste and stubble fibres
Hanifi Binici et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Environmental impacts and thermal insulation performance of innovative composite solutions for building applications
A. D. La Rosa et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Comparative environmental life cycle assessment of thermal insulation materials of buildings
Nuno Pargana et al.
ENERGY AND BUILDINGS (2014)
In situ measurement of thermal transmittance and thermal resistance of hollow reinforced precast concrete walls
Aftab Ahmad et al.
ENERGY AND BUILDINGS (2014)
Impact of the optimization criteria on the determination of the insulation thickness
Jerome Barrau et al.
ENERGY AND BUILDINGS (2014)
Thermal behavior of cement based plastering mortar containing hybrid microencapsulated phase change materials
Mohammad Kheradmand et al.
ENERGY AND BUILDINGS (2014)
Building application and thermal performance of vacuum insulation panels (VIPs) in Canadian subarctic climate
P. Mukhopadhyaya et al.
ENERGY AND BUILDINGS (2014)
Porous thermal insulation materials derived from fly ash using a foaming and slip casting method
Ruifang Zhang et al.
ENERGY AND BUILDINGS (2014)
Thermal and mechanical performance of natural mortar reinforced with date palm fibers for use as insulating materials in building
Nadia Benmansour et al.
ENERGY AND BUILDINGS (2014)
Thermal performance of a building envelope incorporating ETICS with vacuum insulation panels and EPS
I. Mandilaras et al.
ENERGY AND BUILDINGS (2014)
Energy life-cycle approach in Net zero energy buildings balance: Operation and embodied energy of an Italian case study
Maurizio Cellura et al.
ENERGY AND BUILDINGS (2014)
Optimization of thermal insulation to achieve energy savings in low energy house (refurbishment)
Milorad Bojic et al.
ENERGY CONVERSION AND MANAGEMENT (2014)
Toward aerogel based thermal superinsulation in buildings: A comprehensive review
Erdem Cuce et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)
Recycled-PET fibre based panels for building thermal insulation: Environmental impact and improvement potential assessment for a greener production
Carlo Ingrao et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2014)
A Multi-Objective (Energy, Economic and Environmental Performance) Life Cycle Analysis for Better Building Design
Jian Yao
SUSTAINABILITY (2014)
Impact of the insulation materials' features on the determination of optimum insulation thickness
Jerome Barrau et al.
INTERNATIONAL JOURNAL OF ENERGY AND ENVIRONMENTAL ENGINEERING (2014)
Monodisperse Hollow Silica Nanospheres for Nano Insulation Materials: Synthesis, Characterization, and Life Cycle Assessment
Tao Gao et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Sustainability assessment of an innovative lightweight building technology for partition walls - Comparison with conventional technologies
Ricardo Mateus et al.
BUILDING AND ENVIRONMENT (2013)
Experimental evaluation of insulation materials for walls and roofs and their impact on indoor thermal comfort under composite climate
Ashok Kumar et al.
BUILDING AND ENVIRONMENT (2013)
Determination of optimum insulation thickness based on cooling transmission load for building walls in a hot climate
Meral Ozel
ENERGY CONVERSION AND MANAGEMENT (2013)
Vacuum insulated panels for sustainable buildings: a review of research and applications
Sultan Sanat Alotaibi et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2013)
CONVECTION IN MINERAL WOOL USED AS INSULATION FOR BUILDINGS
Vytautas Stankevicius et al.
JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT (2013)
Wood nanocelluloses: fundamentals and applications as new bio-based nanomaterials
Akira Isogai
JOURNAL OF WOOD SCIENCE (2013)
System boundary for embodied energy in buildings: A conceptual model for definition
Manish K. Dixit et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2013)
Experimental and numerical study of a usual brick filled with PCM to improve the thermal inertia of buildings
Necib Hichem et al.
TERRAGREEN 13 INTERNATIONAL CONFERENCE 2013 - ADVANCEMENTS IN RENEWABLE ENERGY AND CLEAN ENVIRONMENT (2013)
Development of Thermal Insulating Materials on Natural Base for Thermal Insulation Systems
Jiri Zach et al.
MODERN BUILDING MATERIALS, STRUCTURES AND TECHNIQUES (2013)
Synthesis of Silica Aerogel by Supercritical Drying Method
Tomasz Blaszczynski et al.
MODERN BUILDING MATERIALS, STRUCTURES AND TECHNIQUES (2013)
Review on thermal energy storage with phase change materials (PCMs) in building applications
D. Zhou et al.
APPLIED ENERGY (2012)
Experimental performance evaluation of aerogel glazing systems
C. Buratti et al.
APPLIED ENERGY (2012)
Investigating sound insulation, thermal conductivity and radioactivity of chipboards produced with cotton waste, fly ash and barite
Hanifi Binici et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Study of the influence of roof insulation involving local materials on cooling load of houses built of clay and straw
David Y. K. Toguyeni et al.
ENERGY AND BUILDINGS (2012)
Ranking of interventions to reduce dwelling overheating during heat waves
S. M. Porritt et al.
ENERGY AND BUILDINGS (2012)
Thermal analysis of the application of pcm and low emissivity coating in hollow bricks
Paolo Principi et al.
ENERGY AND BUILDINGS (2012)
Experimental Research on Properties of High-Strength Foamed Concrete
Chen Bing et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2012)
Economic and environmental benefits of thermal insulation of building external walls
Robert Dylewski et al.
BUILDING AND ENVIRONMENT (2011)
Life cycle assessment of building materials: Comparative analysis of energy and environmental impacts and evaluation of the eco-efficiency improvement potential
Ignacio Zabalza Bribian et al.
BUILDING AND ENVIRONMENT (2011)
Energy, environmental and economic optimization of thermal insulation solutions by means of an integrated decision support system
Dimitris Anastaselos et al.
ENERGY AND BUILDINGS (2011)
Assessment of coconut fibre insulation characteristics and its use to modulate temperatures in concrete slabs with the aid of a finite element methodology
N. J. Rodriguez et al.
ENERGY AND BUILDINGS (2011)
Thermal response of brick wall filled with phase change materials (PCM) under fluctuating outdoor temperatures
Chengbin Zhang et al.
ENERGY AND BUILDINGS (2011)
New thermal insulation boards made from coconut husk and bagasse
Satta Panyakaew et al.
ENERGY AND BUILDINGS (2011)
Traditional, state-of-the-art and future thermal building insulation materials and solutions - Properties, requirements and possibilities
Bjorn Petter Jelle
ENERGY AND BUILDINGS (2011)
Materials used as PCM in thermal energy storage in buildings: A review
L. F. Cabeza et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2011)
Cost benefits analysis and emission reductions of optimum thickness and air gaps for selected insulation materials for building walls in Maldives
T. M. I. Mahlia et al.
ENERGY (2010)
Development and validation of a new TRNSYS type for the simulation of external building walls containing PCM
Frederic Kuznik et al.
ENERGY AND BUILDINGS (2010)
Gas-filled panels for building applications: A state-of-the-art review
Ruben Baetens et al.
ENERGY AND BUILDINGS (2010)
Experimental and numerical investigation of a hollow brick filled with perlite insulation
M. Zukowski et al.
ENERGY AND BUILDINGS (2010)
Determination of the energy savings and the optimum insulation thickness in the four different insulated exterior walls
Aynur Ucar et al.
RENEWABLE ENERGY (2010)
Thermal comfort in residential buildings: Comfort values and scales for building energy simulation
Leen Peeters et al.
APPLIED ENERGY (2009)
A field study of thermal comfort in low-income dwellings in England before and after energy efficient refurbishment
Sung H. Hong et al.
BUILDING AND ENVIRONMENT (2009)
Thermal insulation enhancement in concretes by adding waste PET and rubber pieces
Bulent Yesilata et al.
CONSTRUCTION AND BUILDING MATERIALS (2009)
Detailed energy saving performance analyses on thermal mass walls demonstrated in a zero energy house
L. Zhu et al.
ENERGY AND BUILDINGS (2009)
Life cycle assessment and life cycle cost of buildings' insulation materials in Italy
R. M. Lazzarin et al.
International Journal of Low-Carbon Technologies (2009)
Optimum insulation thicknesses for building walls with respect to cooling and heating degree-hours in the warmest zone of Turkey
Ali Bolatturk
BUILDING AND ENVIRONMENT (2008)
Thermophysical Properties of Sugarcane, Palmyra Palm, and Date-palm Granular Jaggery
P. V. K. Jagannadha Rao et al.
INTERNATIONAL JOURNAL OF FOOD PROPERTIES (2008)
Enhancing Concrete Strength and Thermal Insulation Using Thermoset Plastic Waste
Hasan S. Dweik et al.
INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS (2008)
Determination of optimum insulation thicknesses of the external walls and roof (ceiling) for Turkey's different degree-day regions
Nuri Sisman et al.
ENERGY POLICY (2007)
Correlation between thermal conductivity and the thickness of selected insulation materials for building wall
T. M. I. Mahlia et al.
ENERGY AND BUILDINGS (2007)
A review of transparent insulation systems and the evaluation of payback period for building applications
I. L. Wong et al.
SOLAR ENERGY (2007)
Modular breathing panels for energy efficient, healthy building construction
MSE Imbabi
RENEWABLE ENERGY (2006)
Thermal testing and numerical simulation of a prototype cell using light wallboards coupling vacuum isolation panels and phase change material
M Ahmad et al.
ENERGY AND BUILDINGS (2006)
Concrete blocks for thermal insulation in hot climate
KS Al-Jabri et al.
CEMENT AND CONCRETE RESEARCH (2005)
Performance characteristics and practical applications of common building thermal insulation materials
MS Al-Homoud
BUILDING AND ENVIRONMENT (2005)
State of the art in thermal insulation materials and aims for future developments
AM Papadopoulos
ENERGY AND BUILDINGS (2005)
Heat and moisture transport in durian fiber based lightweight construction materials
S Charoenvai et al.
SOLAR ENERGY (2005)