Related references
Note: Only part of the references are listed.ESS-based probabilistic fatigue life assessment of steel bridges: Methodology, numerical simulation and application
Y. H. Su et al.
ENGINEERING STRUCTURES (2022)
Application of critical distance approach for fatigue assessment of welded and HFMI-treated steel joints
Ozler Karakas et al.
INTERNATIONAL JOURNAL OF FATIGUE (2022)
Biaxial residual stress measurement by indentation energy difference method: Theoretical and experimental study
Wei Peng et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2022)
An experimental investigation into fatigue behaviors of single- and double-sided U rib welds in orthotropic bridge decks
Haibo Yang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2022)
A Structural Stress Approach Accounting for Notch Effects on Fatigue Propagation Life: Part I Theory
Yifei Yu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2022)
A multi-axial vibration fatigue evaluation procedure for welded structures in frequency domain
Xianjun Pei et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)
A Study of Fatigue Crack Propagation Paths at U-Rib Welds in Orthotropic Bridge Decks using a Phased-Array Imaging Technique
Haibo Yang et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2022)
Evaluation of welded cast steel joint fatigue data using structural stress methods
Zezhong Wei et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2021)
Evaluation of multiaxial high-cycle fatigue criteria under proportional loading for S355 steel
Rita Dantas et al.
ENGINEERING FAILURE ANALYSIS (2021)
Fatigue assessment of cruciform joints: Comparison between Strain Energy Density predictions and current standards and recommendations
Pietro Foti et al.
ENGINEERING STRUCTURES (2021)
A uniform volume-based fatigue indicator for high- and low-cycle assessment of notched components
Liuyang Feng et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
A simplified approach to estimate the fatigue life of full-scale welded cast steel thin-walled tubular structures
Zezhong Wei et al.
THIN-WALLED STRUCTURES (2021)
Fatigue property of U rib-crossbeam-deck connections in OBD under combined loading of bending and torsion
Haibo Yang et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)
A primary plus secondary local PWHT method for mitigating weld residual stresses in pressure vessels
Qiang Jin et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2021)
A novel Strain-Energy-Density based fatigue criterion accounting for mean stress and plasticity effects on the medium-to-high-cycle uniaxial fatigue strength of plain and notched components
M. Benedetti et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Fatigue performance of U-rib butt welds in orthotropic steel decks
Zuwei Huang et al.
ENGINEERING STRUCTURES (2020)
Structural strain approach to assess thermo-mechanical fatigue of thin-walled welded joints
Simon Moser et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Incorporating residual stresses into a Strain-Energy-Density based fatigue criterion and its application to the assessment of the medium-to-very-high-cycle fatigue strength of shot-peened parts
M. Benedetti et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Extension of the strain energy density method for fatigue assessment of welded joints to sub-zero temperatures
Moritz Braun et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2020)
Fatigue resistance characterization of frictions stir welds between complex aluminum extrusions: An experimental and finite element study
Yifei Yu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Multiaxial fatigue assessment of tube-tube steel joints with weld ends using the peak stress method
Alberto Campagnolo et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Fatigue crack growth modelling of Fao Bridge puddle iron under variable amplitude loading
Jose Correia et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Fatigue life prediction of metallic materials considering mean stress effects by means of an artificial neural network
Joelton Fonseca Barbosa et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Evaluation of magnesium weldment fatigue data using traction and notch stress methods
Wenqing Zhou et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Fatigue of V-notched ZK60 magnesium samples: X-ray damage evolution characterization and failure prediction
Jafar Albinmousa et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
On the use of a fictitious notch radius equal to 0.3 mm to design against fatigue welded joints made of wrought magnesium alloy AZ31
Ozler Karakas et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
A simplified structural strain method for low-cycle fatigue evaluation of girth-welded pipe components
Xianjun Pei et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Fatigue behavior of typical details of orthotropic steel bridges in multiaxial stress states using traction structural stress
Haibo Yang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
An analytically formulated structural strain method for fatigue evaluation of welded components incorporating nonlinear hardening effects
Xianjun Pei et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2019)
Calculation of 3D residual notch stress intensity factors by means of the peak stress method
Paolo Ferro et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)
Rapid assessment of multiaxial fatigue lifetime in notched components using an averaged strain energy density approach
R. Branco et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
A structural strain parameter for a unified treatment of fatigue behaviors of welded components
Xianjun Pei et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Nominal and local stress quantities to design aluminium-to-steel thin welded joints against fatigue
Ibrahim Al Zamzami et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Influence of fillet end geometry on fatigue behaviour of welded joints
Antonio L. L. da Silva et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Fatigue design of welded double-sided T-joints and double-sided cruciform joints in steel marine structures: A total stress concept
Saloni Palkar et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2019)
Traction structural stress analysis of fatigue behaviors of rib-to-deck joints in orthotropic bridge deck
Ping Wang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Fatigue assessment of longitudinal rib-to-crossbeam welded joints in orthotropic steel bridge decks
Yun Huang et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2019)
An equivalent structural stress-based fatigue evaluation framework for rib-to-deck welded joints in orthotropic steel deck
Jun Li et al.
ENGINEERING STRUCTURES (2019)
Fatigue resistance of rib-to-deck welded joint in OSDs, analyzed by fracture mechanics
Weijian Wu et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2019)
Data-based models for fatigue reliability assessment and life prediction of orthotropic steel deck details considering pavement temperature and traffic loads
Sheng Yu et al.
JOURNAL OF CIVIL STRUCTURAL HEALTH MONITORING (2019)
Critical distance approach for the fatigue strength assessment of magnesium welded joints in contrast to Neuber's effective stress method
O. Karakas et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Strain Energy-Based Fatigue Life Evaluation of Deck-to-Rib Welded Joints in OSD Considering Combined Effects of Stochastic Traffic Load and Welded Residual Stress
Chuang Cui et al.
JOURNAL OF BRIDGE ENGINEERING (2018)
Fatigue behaviour of orthotropic steel bridge decks with inner bulkheads
Aizhu Zhu et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2018)
Fatigue damage criteria classification, modelling developments and trends for welded joints in marine structures
Henk den Besten
SHIPS AND OFFSHORE STRUCTURES (2018)
Stress intensity factors of the rib-to-deck welded joint at the crossbeam conjunction in OSDs
Weijian Wu et al.
ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY (2018)
Experimental investigation for structural parameter effects on fatigue behavior of rib-to-deck welded joints in orthotropic steel decks
Shigenobu Kainuma et al.
ENGINEERING FAILURE ANALYSIS (2017)
Fatigue tests of welded connections between longitudinal stringer and deck plate in railway bridge orthotropic steel decks
Bin Cheng et al.
ENGINEERING STRUCTURES (2017)
Application of Neuber's effective stress method for the evaluation of the fatigue behaviour of magnesium welds
Ozler Karakas
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Review and considerations on the fatigue assessment of welded joints using reference radii
Joerg Baumgartner
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Application of the strain energy density approach in comparing different design solutions for improving the fatigue strength of load carrying shear welded joints
Filippo Berto et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Experimental study on fatigue failure of rib-to-deck welded connections in orthotropic steel bridge decks
Bin Cheng et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Fatigue Performance of Roof and U-Rib Weld of Orthotropic Steel Bridge Deck with Different Penetration Rates
Zhongqiu Fu et al.
JOURNAL OF BRIDGE ENGINEERING (2017)
State-of-the-art review on the local strain energy density concept and its relation to the J-integral and peak stress method
D. Radaj
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2015)
Assessment of fatigue behaviour of orthotropic steel bridge decks using monitoring system
Klara Dudas et al.
FATIGUE DESIGN 2015, INTERNATIONAL CONFERENCE PROCEEDINGS, 6TH EDITION (2015)
Consideration of mean-stress effects on fatigue life of welded magnesium joints by the application of the Smith-Watson-Topper and reference radius concepts
Ozler Karakas
INTERNATIONAL JOURNAL OF FATIGUE (2013)
Fatigue performance of tubular X-joints with PJP plus welds: II - Numerical investigation
Xudong Qian et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2013)
Fatigue performance of tubular X-joints with PJP plus welds: I - Experimental study
Xudong Qian et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2013)
Evaluation on root-deck fatigue of orthotropic steel bridge deck
Ji Bohai et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2013)
Fatigue Design Values for Welded Joints of the Wrought Magnesium Alloy AZ31 (ISO-MgAI3Zn1) According to the Nominal, Structural and Notch Stress Concepts in Comparison to Welded Steel and Aluminium Connections
C. M. Sonsino et al.
Welding in the World (2013)
Notch stress concepts for the fatigue assessment of welded joints - Background and applications
C. M. Sonsino et al.
INTERNATIONAL JOURNAL OF FATIGUE (2012)
Stress Analyses and Parametric Study on Full-Scale Fatigue Tests of Rib-to-Deck Welded Joints in Steel Orthotropic Decks
Hyoung-Bo Sim et al.
JOURNAL OF BRIDGE ENGINEERING (2012)
S-N LINES FOR WELDED THIN JOINTS - SUGGESTED SLOPES AND FAT VALUES FOR APPLYING THE NOTCH STRESS CONCEPT WITH VARIOUS REFERENCE RADII
Cetin M. Sonsino et al.
WELDING IN THE WORLD (2010)
Local fatigue strength parameters for welded joints based on strain energy density with inclusion of small-size notches
D. Radaj et al.
ENGINEERING FRACTURE MECHANICS (2009)
Mean stress relaxation during cyclic straining of high strength aluminum alloys
Attilio Arcari et al.
INTERNATIONAL JOURNAL OF FATIGUE (2009)
Recent developments in local concepts of fatigue assessment of welded joints
D. Radaj et al.
INTERNATIONAL JOURNAL OF FATIGUE (2009)
Consistent approach to calculating stresses for fatigue design of welded rib-to-web connections in steel orthotropic bridge decks
Robert J. Connor et al.
JOURNAL OF BRIDGE ENGINEERING (2006)
Fatigue cracks in longitudinal ribs of steel orthotropic deck
ZG Xiao et al.
INTERNATIONAL JOURNAL OF FATIGUE (2006)
Stress concentration in steel bridge orthotropic decks
MS Pfeil et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2005)
A robust structural stress method for fatigue analysis of offshore/marine structures
P Dong
JOURNAL OF OFFSHORE MECHANICS AND ARCTIC ENGINEERING-TRANSACTIONS OF THE ASME (2005)
Equilibrium-equivalent structural stress approach to fatigue analysis of a rectangular hollow section joint
H Kyuba et al.
INTERNATIONAL JOURNAL OF FATIGUE (2005)
Assessment of multiaxial fatigue behaviour of welded joints under combined bending and torsion by application of a fictitious notch radius
CM Sonsino et al.
INTERNATIONAL JOURNAL OF FATIGUE (2004)
A structural stress definition and numerical implementation for fatigue analysis of welded joints
P Dong
INTERNATIONAL JOURNAL OF FATIGUE (2001)