Related references
Note: Only part of the references are listed.On the superplastic deformation mechanisms of near-α TNW700 titanium alloy
Lixia Ma et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)
Toward an understanding of dwell fatigue damage mechanism of bimodal Ti-6Al-4V alloys
L. R. Zeng et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)
Strain localization and fatigue crack formation at (0001) twist boundaries in titanium alloys
S. Hemery et al.
ACTA MATERIALIA (2021)
Review of the fatigue behavior of hard coating-ductile substrate systems
Yan-yun Bai et al.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2021)
Effects of orientation on microstructure and mechanical properties of TiN/AlN superlattice films
Yanmeng Chen et al.
SCRIPTA MATERIALIA (2021)
Fatigue strength and mechanism of Ti6242S titanium alloy with TiAlN coating deposited under various bias voltages
NithyaGnana Poorani Sivagnanam Chandra et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Cyclic oxidation behaviour of Ti/TiAlN composite multilayer coatings deposited on titanium alloy
Mingming Zhang et al.
CORROSION SCIENCE (2020)
Improved fatigue resistance of gradient nanograined metallic materials: Suppress strain localization and damage accumulation
Qingsong Pan et al.
SCRIPTA MATERIALIA (2020)
The role of pyramidal ⟨c plus a⟩ dislocations in the grain refinement mechanism in Ti-6Al-4V alloy processed by severe plastic deformation
Chenglin Wang et al.
ACTA MATERIALIA (2020)
The mechanism of internal fatigue-crack initiation and early growth in a titanium alloy with lamellar and equiaxed microstructure
Xiangnan Pan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Effect of coating thickness on fatigue behavior of TiAlN coated Ti-alloys
NithyaGnana Poorani Sivagnanam Chandra et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Crystallographic orientation dependent maximum layer thickness of cubic AlN in CrN/AlN multilayers
Zhuo Chen et al.
ACTA MATERIALIA (2019)
Coating thickness effect of metallic glass thin film on the fatigue-properties improvement of 7075 aluminum alloy
P. H. Tsai et al.
THIN SOLID FILMS (2019)
High-cycle and very-high-cycle fatigue behaviour of a titanium alloy with equiaxed microstructure under different mean stresses
Xiangnan Pan et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2019)
Brittle coating effects on fatigue cracks behavior in Ti alloys
Yanyun Bai et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Fatigue and Mechanical Behavior of Ti-6Al-4V Alloy with CrN and TiN Coating Deposited by Magnetic Filtered Cathodic Vacuum Arc Process
Zhaolu Zhang et al.
COATINGS (2019)
Effect of Ni content on the microstructure and mechanical behaviour of CrAlNiN coatings deposited by closed field unbalanced magnetron sputtering
Chuhan Sha et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Improved fatigue resistance of gradient nanograined Cu
Jianzhou Long et al.
ACTA MATERIALIA (2019)
Cleavage cracking of ductile-metal substrates induced by brittle coating fracture
Tao Guo et al.
ACTA MATERIALIA (2018)
The behavior of crack initiation and early growth in high-cycle and very-high-cycle fatigue regimes for a titanium alloy
Xiangnan Pan et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Slip transfer and deformation structures resulting from the low cycle fatigue of near-alpha titanium alloy Ti-6242Si
Sudha Joseph et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Dislocation interactions and crack nucleation in a fatigued near-alpha titanium alloy
S. Joseph et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Abrasive, hydroabrasive, and erosion wear behaviour of nanostructured (Ti,Al)N-Cu and (Ti,Al)N-Ni coatings
D. S. Belov et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Mechanical properties of copper/bronze laminates: Role of interfaces
Xiaolong Ma et al.
ACTA MATERIALIA (2016)
Microstructure and erosive wear behaviors of Ti6A14V alloy treated by plasma Ni alloying
Z. X. Wang et al.
APPLIED SURFACE SCIENCE (2016)
Discrete dislocation and crystal plasticity analyses of load shedding in polycrystalline titanium alloys
Zebang Zheng et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Superlattice effect for enhanced fracture toughness of hard coatings
R. Hahn et al.
SCRIPTA MATERIALIA (2016)
Oxidation protection of commercial-purity titanium by Na2O-CaO-SiO2 and Na2O-CaO-Al2O3-SiO2 glass ceramic coatings
Zunqi Xiao et al.
CERAMICS INTERNATIONAL (2015)
Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility
Xiaolei Wu et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2015)
Propensities of crack interior initiation and early growth for very-high-cycle fatigue of high strength steels
Youshi Hong et al.
INTERNATIONAL JOURNAL OF FATIGUE (2014)
Fatigue property improvements of Ti-6Al-4V by thin film coatings of metallic glass and TiN: a comparison study
C. M. Lee et al.
THIN SOLID FILMS (2014)
Effects of structure and interfaces on fracture toughness of CrN/AlN multilayer coatings
M. Schloegl et al.
SCRIPTA MATERIALIA (2013)
Plain and fretting fatigue behavior of Ti6Al4V alloy coated with TiAlN thin film
F. Yildiz et al.
TRIBOLOGY INTERNATIONAL (2013)
Trends in the elastic response of binary early transition metal nitrides
David Holec et al.
PHYSICAL REVIEW B (2012)
Fatigue behavior of PVD coated Ti-6Al-4V alloy
M. Y. P. Costa et al.
INTERNATIONAL JOURNAL OF FATIGUE (2011)
Evaluating the effects of plasma diffusion processing and duplex diffusion/PVD-coating on the fatigue performance of Ti-6Al-4V alloy
G. Cassar et al.
INTERNATIONAL JOURNAL OF FATIGUE (2011)
INFLUENCE OF THE SUBSTRATE BIAS VOLTAGE ON FRETTING FATIGUE BEHAVIOR OF CrN FILM DEPOSITED ON Ti-6Al-4V ALLOY
M. S. Rahman et al.
INTERNATIONAL JOURNAL OF MODERN PHYSICS B (2011)
Influence of Ti/TiN bilayered and multilayered films on the axial fatigue performance of Ti46Al8Nb alloy
Y. Zhou et al.
THIN SOLID FILMS (2011)
Fatigue behavior of a 316L stainless steel coated with a DLC film deposited by PVD magnetron sputter ion plating
E. S. Puchi-Cabrera et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD
Marion Calcagnotto et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Determination of elastic strain fields and geometrically necessary dislocation distributions near nanoindents using electron back scatter diffraction
Angus J. Wilkinson et al.
PHILOSOPHICAL MAGAZINE (2010)
Fatigue-resistance enhancements by glass-forming metallic films
F. X. Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Influence of the Al distribution on the structure, elastic properties, and phase stability of supersaturated Ti1-xAlxN
P. H. Mayrhofer et al.
JOURNAL OF APPLIED PHYSICS (2006)
Microstructural aspects of plain aluminide and Pt-aluminide coatings on Ti-base alloy IMI-834
SP Trivedi et al.
INTERMETALLICS (2005)
Evolution of dislocation density and character in hot rolled titanium determined by X-ray diffraction
IC Dragomir et al.
MATERIALS CHARACTERIZATION (2005)
Another mechanism for fatigue strength improvement of metallic parts by shot peening
YK Gao et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2003)
A review of dwell sensitive fatigue in titanium alloys: the role of microstructure, texture and operating conditions
MR Bache
INTERNATIONAL JOURNAL OF FATIGUE (2003)
Structures of AlN/VN superlattices with different AlN layer thicknesses
Q Li et al.
JOURNAL OF MATERIALS RESEARCH (2002)