☆ 4.7 Article

Comparison study of electrochemical and thermal stability of Na3V2(PO4)3 in different electrolytes under room and elevated temperature

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

Related references

Note: Only part of the references are listed.

Article Energy & Fuels

Scalable, colloidal synthesis of SnSb nanoalloy-decorated mesoporous 3D NiO microspheres as a sodium-ion battery anode

Ariono Verdianto et al.

Summary: This research presents the synthesis of SnSb nanoalloy-decorated NiO microspheres, delivering high capacity and improved electrode kinetics for anode materials in sodium-ion batteries. The unique microsphere architecture exhibits advanced performance, achieving high reversible capacity and long-term cycling performance through nanosizing and nanoconfinement effects.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

Add to Collection

Review Energy & Fuels

Review on recent progress in Manganese-based anode materials for sodium-ion batteries

Nor Fazila Mahamad Yusoff et al.

Summary: Sodium-ion batteries are getting attention as an alternative energy storage method, but designing high-performance electrode materials remains a challenge. Manganese-based materials have potential due to their high theoretical specific capacity and low cost, but research is needed to meet expected application targets.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

Add to Collection

Article Energy & Fuels

Carbon microsphere encapsulated SnS for use as an anode material in full-cell sodium-ion battery

Mobinul Islam et al.

Summary: A one-pot hydrothermal approach was used to encapsulate SnS particles in micro-carbon spheres, improving the cycle life and performance of SnS in sodium-ion batteries. The carbon matrix acted as a cushion, facilitating the movement of Na+ ions and electrons within the electrode. This study serves as a research guide for future investigation of anode materials in SIBs.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

Add to Collection

Article Chemistry, Physical

Comparative Study of the Thermal Stability of Electrode Materials for Li-Ion and Na-Ion Batteries

Ruslan R. Samigullin et al.

Summary: The thermal stability of cathode and anode materials for Li-ion and Na-ion batteries was studied using differential scanning calorimetry and ex situ powder X-ray diffraction. The results showed that the thermal stability of Na-ion cathode materials increases in the order NFM < NVPF < NVP < NVPO. The heat on energy term was proposed and analyzed for all studied materials.

ACS APPLIED ENERGY MATERIALS (2022)

Add to Collection

Article Engineering, Chemical

Scalable synthesis of Na3V2(PO4)3/C with high safety and ultrahigh-rate performance for sodium-ion batteries

Guijia Cui et al.

Summary: In this study, a porous Na3V2(PO4)(3)/C cathode material with excellent electrochemical performance was successfully prepared, and its advantages in low-temperature performance and safety were demonstrated through the fabrication of 500-mAh symmetrical sodium-ion batteries.

CHINESE JOURNAL OF CHEMICAL ENGINEERING (2022)

Add to Collection

Article Energy & Fuels

A novel reed-leaves like aluminum-doped manganese oxide presetting sodium-ion constructed by coprecipitation method for high electrochemical performance sodium-ion battery

Kedi Cai et al.

Summary: In this study, Al-doped manganese oxide with presetting sodium-ion (NaxMnyAlzO2) was synthesized and combined with Na3V2(PO4)(3) cathode active materials to optimize the electrochemical performances of sodium-ion batteries. The reed-leaves like NaxMnyAlzO2 polynary metal oxide exhibited excellent reversibility and low electrochemical impedance, and showed a specific discharge capacity of 73.76 F g(-1) at 100 mA g(-1) current density.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

Add to Collection

Article Energy & Fuels

Monoclinicα-NaVOPO4as cathode materials for sodium-ions batteries: Experimental andDFTinvestigation

El abadila Iffer et al.

Summary: The monoclinic alpha-NaVOPO(4) was synthesized using sol-gel method, and its poor electrochemical activity was attributed to its low intrinsic electronic conductivity. The material exhibits high voltage, good ionic conductivity and stability, but shows poor performance due to the large charge transfer resistance. Experimental and theoretical results explain the origin of this behavior, with detailed magnetic study also reported in this paper.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

Add to Collection

Article Energy & Fuels

Na2TiV(PO4)3@C composite with excellent Na-storage performance based on a solid-state polymer electrolyte membrane

Wei Gao et al.

Summary: The Na2TiV(PO4)(3) compound functions as a cathode material for sodium-ion battery, and the quasi-solid sodium-ion battery assembled with it exhibits better cycle and rate performance compared to liquid electrolyte batteries.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A robust carbon coating of Na3V2(PO4)3 cathode material for high performance sodium-ion batteries

Liying Shen et al.

Summary: Na3V2(PO4)(3) is a promising electrode material for sodium-ion batteries, but faces limitations due to poor electronic conductivity. A two-step method was used to prepare carbon-coated Na3V2(PO4)(3) materials with remarkable electrochemical performance, surpassing most advanced cathode materials reported in literature.

CHINESE CHEMICAL LETTERS (2021)

Add to Collection

Article Energy & Fuels

Al-substituted stable-layered P2-Na0.6Li0.15Al0.15Mn0.7O2 cathode for sodium ion batteries

Xiaoli Chen et al.

Summary: The study developed a stable P2-Na0.6Li0.15Al0.15Mn0.7O2 sodium cathode, which exhibited good rate performance and initial reversible capacity. Investigations into multiple characteristics revealed that this new cathode does not undergo phase transition during cycling processes.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

Add to Collection

Article Energy & Fuels

Impedance studies of biosynthesized Na0.8Ni0.33Co0.33Mn0.33O2 applied in an aqueous sodium-ion battery

Assumpta Chinwe Nwanya et al.

Summary: By synthesizing nanoparticles using maize silk extract, we achieved high performance as the positive electrode material for a sodium ion battery. The structure and electrochemical properties of the material were studied in detail, demonstrating promising results for energy storage applications.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

Add to Collection

Article Energy & Fuels

Optimize solid-state synthesis of P2-Na0.67Ni0.33Mn0.67O2 cathode materials by using the orthogonal experimental design method

Liu Yang et al.

Summary: The P2-Na0.67Ni0.33Mn0.67O2 cathode materials were synthesized using a solid-state method and their electrochemical performance was studied. Optimal synthesis parameters were determined through orthogonal experiments, with excess Na content, calcination temperature, and time being the key factors. The materials exhibited good initial discharge capacity and excellent rate performance.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Discharge State of Layered P2-Type Cathode Reveals Unsafe than Charge Condition in Thermal Runaway Event for Sodium-Ion Batteries

Manikandan Palanisamy et al.

Summary: A layered P2-type NaCoO2 cathode prepared through a sol-gel process and heat treatment demonstrated highly reversible phase transition mechanism in cyclic voltammograms. Sodium cells exhibited unsafe characteristics in terms of cycling performance and thermal behavior in the discharged state.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Electrochemistry

Evaluation of electrochemical performance and redox activity of Fe in Ti doped layered P2-Na0.67Mn0.5Fe0.5O2 cathode for sodium ion batteries

Devendrasinh Darbar et al.

Summary: Titanium doping effectively enhances the structural stability and electrochemical performance of P2-type Na0.67Fe0.5Mn0.5O2 layered oxide cathodes, by replacing some Mn and Fe atoms to mitigate Jahn Teller distortion, increasing Na layer thickness, minimizing lattice volume strain, and reducing charge transfer resistance.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Chemistry, Physical

Carbon coated NaLi0.2Mn0.8O2 as a superb cathode material for sodium ion batteries

Ngo Quy Quyen et al.

Summary: Adding carbon to the surface of P2-type sodium-lithium-manganese oxide material improves its rate capacity and specific capacity, making the carbon-coated NLM@C material a promising cathode material for sodium-ion batteries.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Electrochemistry

Thermophysical Characterization of a Layered P2 Type Structure Na0.53MnO2 Cathode Material for Sodium Ion Batteries

Ijaz Ul Mohsin et al.

Summary: This study focuses on the thermal characterization of a commercial layered P2 type structure Na0.53MnO2 cathode material in powder form for sodium ion batteries (SIBs) in the temperature range between -20 and 1200 degrees C. The research provides valuable data for thermal simulation studies, thermal management, and the prevention of thermal runaway in battery systems.

BATTERIES-BASEL (2021)

Add to Collection

Article Energy & Fuels

Na3V2(PO4)3/C composites as low-cost and high-performance cathode materials for sodium-ion batteries

Limin Zhu et al.

Summary: By improving the electronic conductivity of Na3V2(PO4)(3), Na3V2(PO4)(3)/C composites were synthesized, with Na3V2(PO4)(3)/C-1.5 composite exhibiting higher initial discharge capacity and superior cycling performance.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

Add to Collection

Article Energy & Fuels

Na3V2(PO4)3@NC composite derived from polyaniline as cathode material for high-rate and ultralong-life sodium-ion batteries

Limin Zhu et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2020)

Add to Collection

Article Chemistry, Inorganic & Nuclear

A stable and superior performance of Na3V2(PO4)3/C nanocomposites as cathode for sodium-ion batteries

Fangdong Hu et al.

INORGANIC CHEMISTRY COMMUNICATIONS (2020)

Add to Collection

Article Energy & Fuels

A facile control in free-carbon domain with divinylbenzene for the high-rate-performing Sb/SiOCcomposite anode material in sodium-ion batteries

Dowon Kim et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2020)

Add to Collection

Article Chemistry, Physical

Improving the Electrochemical Performance of Na3V2(PO4)3 Cathode in Na-Ion Batteries by Si-Doping

Santosh Kumar Pal et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Enhanced rate and cyclability of a porous Na3V2(PO4)3 cathode using dimethyl ether as the electrolyte for application in sodium-ion batteries

Milan K. Sadan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced Cycling Stability and Rate Capability in a La-Doped Na3V2(PO4)3/C Cathode for High-Performance Sodium Ion Batteries

Linnan Bi et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Article Nanoscience & Nanotechnology

High-Safety Symmetric Sodium-Ion Batteries Based on Nonflammable Phosphate Electrolyte and Double Na3V2(PO4)(3) Electrodes

Xingwei Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Electrochemistry

Microstructural Analysis of the Effects of Thermal Runaway on Li-Ion and Na-Ion Battery Electrodes

James B. Robinson et al.

JOURNAL OF ELECTROCHEMICAL ENERGY CONVERSION AND STORAGE (2018)

Add to Collection

Article Nanoscience & Nanotechnology

3.0 V High Energy Density Symmetric Sodium-Ion Battery: Na4V2(PO4)3||Na3V2(PO4)3

Xuhui Yao et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Materials Science, Ceramics

Porous Na3V2(PO4)3 prepared by freeze-drying method as high performance cathode for sodium-ion batteries

Li-Li Zheng et al.

CERAMICS INTERNATIONAL (2018)

Add to Collection

Article Engineering, Environmental

Three-dimensional hierarchical porous Na3V2(PO4)(3)/C structure with high rate capability and cycling stability for sodium-ion batteries

Rui Ling et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection

Article Chemistry, Physical

Preventing structural degradation from Na3V2(PO4)(3) to V-2(PO4)(3): F-doped Na3V2(PO4)(3)/C cathode composite with stable lifetime for sodium ion batteries

Yanjun Chen et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Article Chemistry, Physical

Synthesis of carbon-coated Na2MnPO4F hollow spheres as a potential cathode material for Na-ion batteries

Ling Wu et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Article Chemistry, Physical

Thermal stability of Sn anode material with non-aqueous electrolytes in sodium-ion batteries

Yongho Lee et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Chemistry, Physical

Mn doped NaV3(PO4)3/C anode with high-rate and long cycle-life for sodium ion batteries

Xing Ou et al.

ENERGY STORAGE MATERIALS (2018)

Add to Collection

Article Electrochemistry

Electrochemical Performance and Thermal Stability of Iron Oxyfluoride (FeOF) for Sodium-Ion Batteries

Ayuko Kitajou et al.

BATTERIES-BASEL (2018)

Add to Collection

Article Chemistry, Physical

Efficient Method of Designing Stable Layered Cathode Material for Sodium Ion Batteries Using Aluminum Doping

Hari Vignesh Ramasamy et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Enhanced Sodium Ion Storage Behavior of P2-Type Na2/3Fe1/2Mn1/2O2 Synthesized via a Chelating Agent Assisted Route

Ying Bai et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Article Chemistry, Physical

Extending the cycle life of Na3V2(PO4)(3) cathodes in sodium-ion batteries through interdigitated carbon scaffolding

Xi Jiang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Add to Collection

Article Chemistry, Multidisciplinary

One-Dimensional Na3V2(PO4)3/C Nanowires as Cathode Materials for Long-Life and High Rate Na-Ion Batteries

Yu Jiang et al.

CHEMNANOMAT (2016)

Add to Collection

Article Chemistry, Multidisciplinary

A Superior Na3V2(PO4)3-Based Nanocornposite Enhanced by Both N-Doped Coating Carbon and Graphene as the Cathode for Sodium-Ion Batteries

Jin-Zhi Guo et al.

CHEMISTRY-A EUROPEAN JOURNAL (2015)

Add to Collection

Article Electrochemistry

Improved cyclic stability of layered lithium cobalt oxide at high potential via cathode electrolyte interphase formed by 4-(trifluoromethyl) benzonitrile

Xianshu Wang et al.

ELECTROCHIMICA ACTA (2015)

Add to Collection

Article Chemistry, Physical

Nanoconfined Carbon-Coated Na3V2(PO4)3 Particles in Mesoporous Carbon Enabling Ultralong Cycle Life for Sodium-Ion Batteries

Yu Jiang et al.

ADVANCED ENERGY MATERIALS (2015)

Add to Collection

Article Energy & Fuels

Thermal behaviour analysis of lithium-ion battery at elevated temperature using deconvolution method

Ping Ping et al.

APPLIED ENERGY (2014)

Add to Collection

Article Electrochemistry

Submicrometer porous Li3V2(PO4)3/C composites with high rate electrochemical performance prepared by sol-gel combustion method

Qing-Zhu Ou et al.

ELECTROCHIMICA ACTA (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Towards Highly Stable Storage of Sodium Ions: A Porous Na3V2(PO4)3/C Cathode Material for Sodium-Ion Batteries

Wei Shen et al.

CHEMISTRY-A EUROPEAN JOURNAL (2013)

Add to Collection

Article Chemistry, Physical

Electrochemical and thermal properties of hard carbon-type anodes for Na-ion batteries

Jie Zhao et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection

Article Electrochemistry

The Reactivity of Charged Electrode Materials with Sodium Bis(trifluoromethanesulfonyl)imide (NaTFSI) Based-Electrolyte at Elevated Temperatures

Xin Xia et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)

Add to Collection

Article Electrochemistry

Electrochemical and Thermal Properties of alpha-NaFeO2 Cathode for Na-Ion Batteries

Jie Zhao et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)

Add to Collection

Article Chemistry, Physical

Superior Electrochemical Performance and Storage Mechanism of Na3V2(PO4)3 Cathode for Room-Temperature Sodium-Ion Batteries

Zelang Jian et al.

ADVANCED ENERGY MATERIALS (2013)

Add to Collection

Article Chemistry, Physical

The First Report on Excellent Cycling Stability and Superior Rate Capability of Na3V2(PO4)3 for Sodium Ion Batteries

Kuppan Saravanan et al.

ADVANCED ENERGY MATERIALS (2013)

Add to Collection

Article Chemistry, Physical

Li2MnSiO4@C nanocomposite as a high-capacity cathode material for Li-ion batteries

Zhe Hu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2013)

Add to Collection

Article Electrochemistry

NaCrO2 is a Fundamentally Safe Positive Electrode Material for Sodium-Ion Batteries with Liquid Electrolytes

Xin Xia et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2012)

Add to Collection

Article Electrochemistry

Carbon coated Na3V2(PO4)(3) as novel electrode material for sodium ion batteries

Zelang Jian et al.

ELECTROCHEMISTRY COMMUNICATIONS (2012)

Add to Collection

Article Chemistry, Multidisciplinary

In search of an optimized electrolyte for Na-ion batteries

Alexandre Ponrouch et al.

ENERGY & ENVIRONMENTAL SCIENCE (2012)

Add to Collection

Article Electrochemistry

Electrochemical and Thermal Properties of NASICON Structured Na3V2(PO4)(3) as a Sodium Rechargeable Battery Cathode: A Combined Experimental and Theoretical Study

Soo Yeon Lim et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)

Add to Collection

Article Electrochemistry

Study of the Reactivity of Na/Hard Carbon with Different Solvents and Electrolytes

Xin Xia et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)

Add to Collection

Article Electrochemistry

A Study of the Reactivity of De-Intercalated P2-NaxCoO2 with Non-Aqueous Solvent and Electrolyte by Accelerating Rate Calorimetry

Xin Xia et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)

Add to Collection

Article Electrochemistry

A Study of the Reactivity of De-Intercalated NaNi0.5Mn0.5O2 with Non-Aqueous Solvent and Electrolyte by Accelerating Rate Calorimetry

Xin Xia et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)

Add to Collection

Article Electrochemistry

Comparison of the Reactivity of NaxC6 and LixC6 with Non-Aqueous Solvents and Electrolytes

Xin Xia et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2011)

Add to Collection

Article Chemistry, Multidisciplinary

Electrospun Ultralong Hierarchical Vanadium Oxide Nanowires with High Performance for Lithium Ion Batteries

Liqiang Mai et al.

NANO LETTERS (2010)

Add to Collection

Article Electrochemistry

The reactivity of delithiated Li(Ni1/3Co1/3Mn1/3)O2, Li(Ni0.8Co0.15Al0.05)O2 or LiCoO2 with non-aqueous electrolyte

Yadong Wang et al.

ELECTROCHEMISTRY COMMUNICATIONS (2007)

Add to Collection

Article Electrochemistry

On the stability of LiFePO4 olivine cathodes under various conditions (electrolyte solutions, temperatures)

Maxim Koltypin et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2007)

Add to Collection

Article Electrochemistry

Study of LiFePO4 by cyclic voltammetry

Denis Y. W. Yu et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2007)

Add to Collection

Article Electrochemistry

The reactions of Li0.5CoO2 with nonaqueous solvents at elevated temperatures

DD MacNeil et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2002)

Add to Collection

Article Electrochemistry

A comparison between the high temperature electrode/electrolyte reactions of LixCoO2 and LixMn2O4

DD MacNeil et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2001)

Add to Collection

Article Chemistry, Physical

A powder neutron diffraction investigation of the two rhombohedral NASICON analogues:: γ-Na3Fe2(PO4)3 and Li3Fe2(PO4)3

C Masquelier et al.

CHEMISTRY OF MATERIALS (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.