4.7 Article

Motion Trajectory Tracking and Sway Reduction for Double-Pendulum Overhead Cranes Using Improved Adaptive Control Without Velocity Feedback

Related references

Note: Only part of the references are listed.
Article Automation & Control Systems

Adaptive Fuzzy Control for a Class of MIMO Underactuated Systems With Plant Uncertainties and Actuator Deadzones: Design and Experiments

Tong Yang et al.

Summary: This article addresses the control problem of underactuated systems by using elaborately constructed finite-time convergent surfaces, overcoming the main obstacle in sliding-mode surface analysis and demonstrating its importance in real applications.

IEEE TRANSACTIONS ON CYBERNETICS (2022)

Article Automation & Control Systems

Neural Network-based Robust Anti-sway Control of an Industrial Crane Subjected to Hoisting Dynamics and Uncertain Hydrodynamic Forces

Gyoung-Hahn Kim et al.

Summary: A neural network-based robust anti-sway control method is proposed for a crane system transporting an underwater object. By embedding estimators in the system to compensate for uncertainties and unmodeled dynamics, the control performance against uncertainties is improved and chattering phenomena are reduced.

INTERNATIONAL JOURNAL OF CONTROL AUTOMATION AND SYSTEMS (2021)

Article Automation & Control Systems

Nonlinear Sliding Mode Tracking Control of Underactuated Tower Cranes

Zhuoqing Liu et al.

Summary: This paper proposes a nonlinear sliding mode tracking controller for tower cranes, which can achieve satisfactory tracking performance and effective swing suppression. The system closed loop stability is theoretically proven through rigorous analysis. The controller is effective and exhibits satisfactory robustness in hardware experiments.

INTERNATIONAL JOURNAL OF CONTROL AUTOMATION AND SYSTEMS (2021)

Article Automation & Control Systems

Swing reduction for double-pendulum three-dimensional overhead cranes using energy-analysis-based control method

Huimin Ouyang et al.

Summary: In this study, a nonlinear controller based on energy analysis is proposed to address practical issues related to the double-pendulum effect in three-dimensional overhead crane systems, aiming to overcome actuator saturation constraints and improve control performance.

INTERNATIONAL JOURNAL OF ROBUST AND NONLINEAR CONTROL (2021)

Article Engineering, Mechanical

Robust observer-based anti-swing control of 2D-crane systems with load hoisting-lowering

Roger Miranda-Colorado

Summary: A new model-free robust control scheme is proposed for reducing the payload swing angle of two-dimensional crane systems with varying rope length. The controller includes a coupling function and disturbance observer to attenuate swing angle magnitude and minimize the effects of disturbances, allowing the system to track desired motion and hoist/load with minimal oscillations. Comparative numerical simulations show that the new controller outperforms existing control techniques in the presence of internal and external disturbances.

NONLINEAR DYNAMICS (2021)

Article Construction & Building Technology

Nonlinear-adaptive-based swing reduction control for rotary cranes with double-pendulum effect considering uncertain parameters and external disturbances

Huimin Ouyang et al.

Summary: The research demonstrates that the designed adaptive nonlinear control method exhibits excellent control performance and robustness in dealing with model uncertainty and external disturbances, with both theoretical value and practical engineering significance.

AUTOMATION IN CONSTRUCTION (2021)

Article Engineering, Mechanical

Adaptive fractional-order terminal sliding mode control of rubber-tired gantry cranes with uncertainties and unknown disturbances

Hoang Manh Cuong et al.

Summary: This study presents an adaptive robust control system for rubber-tired gantry (RTG) cranes using fractional calculus combined with sliding mode control to deal with parametric variations and unknown wind disturbances. Simulation and experiment results demonstrate the superiority of the proposed control system in tracking actuated states and stabilizing unactuated states, despite uncertainties and disturbances.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Article Engineering, Mechanical

Modeling and nonlinear sliding mode controls of double pendulum cranes considering distributed mass beams, varying roped length and external disturbances

Qingxiang Wu et al.

Summary: This paper establishes a dynamic model of a double pendulum crane system with distributed mass beams (DMB) taking into account the varying rope length, and proposes four versions of sliding mode control utilizing an equivalent control strategy. A state observer adaptive to the length variation of the suspension rope is designed based on the pole placement method. Nonlinear sliding model control methods utilizing velocity control are also presented. Simulations and experiments demonstrate the effectiveness of the proposed methods in ensuring system stability, robustness, and adaptability to varying rope length.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Article Engineering, Mechanical

Adaptive integral sliding mode control with payload sway reduction for 4-DOF tower crane systems

Menghua Zhang et al.

NONLINEAR DYNAMICS (2020)

Article Engineering, Mechanical

Energy coupled-dissipation control for 3-dimensional overhead cranes

Shengzeng Zhang et al.

NONLINEAR DYNAMICS (2020)

Article Computer Science, Artificial Intelligence

Neural Network-Based Adaptive Antiswing Control of an Underactuated Ship-Mounted Crane With Roll Motions and Input Dead Zones

Tong Yang et al.

IEEE TRANSACTIONS ON NEURAL NETWORKS AND LEARNING SYSTEMS (2020)

Article Automation & Control Systems

Minimum-time S-curve commands for vibration-free transportation of an overhead crane with actuator limits

Ho Duc Tho et al.

CONTROL ENGINEERING PRACTICE (2020)

Article Engineering, Mechanical

Disturbance-observer-based nonlinear control for overhead cranes subject to uncertain disturbances

Xianqing Wu et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Article Computer Science, Information Systems

Fuzzy robust fault-tolerant control for offshore ship-mounted crane system

Bin Guo et al.

INFORMATION SCIENCES (2020)

Article Automation & Control Systems

Disturbance-Compensation-Based Continuous Sliding Mode Control for Overhead Cranes With Disturbances

Xianqing Wu et al.

IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING (2020)

Article Automation & Control Systems

Nonlinear Control of Underactuated Systems Subject to Both Actuated and Unactuated State Constraints With Experimental Verification

He Chen et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2020)

Article Engineering, Mechanical

Dynamic analysis and time optimal anti-swing control of double pendulum bridge crane with distributed mass beams

Qingxiang Wu et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Article Engineering, Mechanical

Adaptive tracking controller design for double-pendulum tower cranes

Huimin Ouyang et al.

MECHANISM AND MACHINE THEORY (2020)

Article Engineering, Mechanical

Interval estimation and optimization for motion trajectory of overhead crane under uncertainty

Haijun Peng et al.

NONLINEAR DYNAMICS (2019)

Article Engineering, Multidisciplinary

An Input Shaping Control Scheme with Application on Overhead Cranes

Khalid Alghanim et al.

INTERNATIONAL JOURNAL OF NONLINEAR SCIENCES AND NUMERICAL SIMULATION (2019)

Article Engineering, Mechanical

An adaptive tracking control method with swing suppression for 4-DOF tower crane systems

He Chen et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Article Automation & Control Systems

An Efficient Adaptive Hierarchical Sliding Mode Control Strategy Using Neural Networks for 3D Overhead Cranes

Viet-Anh Le et al.

INTERNATIONAL JOURNAL OF AUTOMATION AND COMPUTING (2019)

Article Automation & Control Systems

Nonlinear Stabilizing Control for Ship-Mounted Cranes With Ship Roll and Heave Movements: Design, Analysis, and Experiments

Ning Sun et al.

IEEE TRANSACTIONS ON SYSTEMS MAN CYBERNETICS-SYSTEMS (2018)

Article Automation & Control Systems

Nonlinear Energy-Based Regulation Control of Three-Dimensional Overhead Cranes

Xianqing Wu et al.

IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING (2017)

Article Automation & Control Systems

Sliding-Mode-Control-Based Robust Finite-Time Antisway Tracking Control of 3-D Overhead Cranes

Dongkyoung Chwa

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2017)

Article Automation & Control Systems

Amplitude-Saturated Nonlinear Output Feedback Antiswing Control for Underactuated Cranes With Double-Pendulum Cargo Dynamics

Ning Sun et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2017)

Article Engineering, Mechanical

An improved input shaping design for an efficient sway control of a nonlinear 3D overhead crane with friction

Mohammad Javad Maghsoudi et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)

Review Engineering, Mechanical

Control strategies for crane systems: A comprehensive review

Liyana Ramli et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)

Article Automation & Control Systems

Adaptive Nonlinear Crane Control With Load Hoisting/Lowering and Unknown Parameters: Design and Experiments

Ning Sun et al.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2015)