Related references
Note: Only part of the references are listed.Prediction method for ignition delay time of liquid spray combustion in constant volume chamber
Jiun Cai Ong et al.
FUEL (2021)
Development and validation of a n-butanol reduced chemical kinetic mechanism under engine relevant conditions
Edwin Jia Chiet Choo et al.
INTERNATIONAL JOURNAL OF CHEMICAL KINETICS (2021)
A comparative study on the combustion and emissions of a non-road common rail diesel engine fueled with primary alcohol fuels (methanol, ethanol, and n-butanol)/diesel dual fuel
Le Ning et al.
FUEL (2020)
The comparison of combustion, engine performance and emission characteristics of ethanol, methanol, fusel oil, butanol, isopropanol and naphtha with n-heptane blends on HCCI engine
Alper Calam et al.
FUEL (2020)
A numerical study on the quasi-steady spray and soot characteristics for soybean methyl ester and its blends with ethanol using CFD-reduced chemical kinetics approach
Xinwei Cheng et al.
ENERGY (2020)
Estimation of NOx and soot emission from a constant volume n-butanol/n-dodecane blended spray using unsteady flamelet model based on n-dodecane/n-butanol/NOx/PAH chemistry
Anil Bhurao Wakale et al.
JOURNAL OF THE ENERGY INSTITUTE (2020)
Evaluation of engine combustion and exhaust emissions characteristics using diesel/butanol blended fuel
I. M. Yusri et al.
APPLIED THERMAL ENGINEERING (2019)
Effect of Injection Pressure and Air-Fuel Ratio on the Self-Ignition Properties of 1-Butanol-Diesel Fuel Blends: Study Using a Constant-Volume Combustion Chamber
Hubert Kuszewski
ENERGY & FUELS (2019)
Effects of ambient pressure on ignition and flame characteristics in diesel spray combustion
Kar Mun Pang et al.
FUEL (2019)
Effects of oxygen concentrations on the ignition and quasi-steady processes of n-heptane spray flames using large eddy simulation
Haiqiao Wei et al.
FUEL (2019)
Experimental investigation on performance, combustion and emission analysis of a direct injection diesel engine fuelled with rapeseed oil biodiesel
L. Anantha Raman et al.
FUEL (2019)
Study on the Physicochemical Properties and Spray and Combustion Characteristics of 1-Butanol/Diesel Fuel Blends in a Constant-Volume Combustion Chamber
Xiaoqing Zhang et al.
ENERGY & FUELS (2019)
Emission and injection characteristics of corn biodiesel blends in diesel engine
S. Manigandan et al.
FUEL (2019)
The Impact of Injector Hole Diameter on Spray Behaviour for Butanol-Diesel Blends
Sattar Jabbar Murad Algayyim et al.
ENERGIES (2018)
Effect of intake oxygen concentration on diesel-n-butanol blending combustion: An experimental and numerical study at low engine load
Jizhen Zhu et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Spray and combustion characterizations of ABE/Dodecane blend in comparison to alcohol/Dodecane blends at high-pressure and high-temperature conditions
O. Nilaphai et al.
FUEL (2018)
A comparative analysis of n-butanol/diesel and 1-pentanol/diesel blends in a compression ignition engine
Alpaslan Atmanli et al.
FUEL (2018)
Evaluation of a Lagrangian Soot Tracking Method for the prediction of primary soot particle size under engine-like conditions
Jiun Cai Ong et al.
JOURNAL OF AEROSOL SCIENCE (2018)
Computational Investigation on Soot Mechanism of Diesel and Diesel/n-Butanol Blend in Constant Volume Chamber with Various Ambient Temperatures
Jie Hou et al.
ENERGY & FUELS (2017)
Effects of Heavy Fuel Oil Blend with Ethanol, n-Butanol or Methanol Bioalcohols on the Spray Characteristics
P. Ghadimi et al.
Journal of Applied Fluid Mechanics (2017)
Combustion characteristics and operation range of a RCCI combustion engine fueled with direct injection n-heptane and pipe injection n-butanol
Chao Zhang et al.
ENERGY (2017)
Characterization of n-butanol diesel blends on a small size variable compression ratio diesel engine: Modeling and experimental investigation
Ashish Nayyar et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Sparse-Lagrangian MMC simulations of an n-dodecane jet at engine-relevant conditions
F. Salehi et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2017)
Review on the characteristics of butanol, its production and use as fuel in internal combustion engines
Wagner Roberto da Silva Trindade et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Clean combustion of n-butanol as a next generation biofuel for diesel engines
Xiaoye Han et al.
APPLIED ENERGY (2017)
An experimental study on the combustion and emission characteristics of a diesel engine under low temperature combustion of diesel/gasoline/n-butanol blends
Haozhong Huang et al.
APPLIED ENERGY (2016)
Characterisation of two-stage ignition in diesel engine-relevant thermochemical conditions using direct numerical simulation
Alex Krisman et al.
COMBUSTION AND FLAME (2016)
An analysis of the structure of an n-dodecane spray flame using TPDF modelling
Yuanjiang Pei et al.
COMBUSTION AND FLAME (2016)
Development and validation of a generic reduced chemical kinetic mechanism for CFD spray combustion modelling of biodiesel fuels
Xinwei Cheng et al.
COMBUSTION AND FLAME (2015)
Large eddy simulation of turbulent spray combustion
Abolfazl Irannejad et al.
COMBUSTION AND FLAME (2015)
Evaluation and optimisation of phenomenological multi-step soot model for spray combustion under diesel engine-like operating conditions
Kar Mun Pang et al.
COMBUSTION THEORY AND MODELLING (2015)
Effect of air dilution and effective compression ratio on the combustion characteristics of a HCCI (homogeneous charge compression ignition) engine fuelled with n-butanol
Mao-Bin Liu et al.
ENERGY (2015)
Experimental study on diesel conventional and low temperature combustion by fueling four isomers of butanol
Zunqing Zheng et al.
FUEL (2015)
Experimental studies on combustion and emissions of RCCI fueled with n-heptane/alcohols fuels
Yong Qian et al.
FUEL (2015)
Simultaneous formaldehyde PLIF and high-speed schlieren imaging for ignition visualization in high-pressure spray flames
Scott A. Skeen et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2015)
Development and validation of an n-dodecane skeletal mechanism forspray combustion applications
Zhaoyu Luo et al.
COMBUSTION THEORY AND MODELLING (2014)
Combustion and emissions characteristics of high n-butanol/diesel ratio blend in a heavy-duty diesel engine and EGR impact
Zheng Chen et al.
ENERGY CONVERSION AND MANAGEMENT (2014)
Time-resolved spray, flame, soot quantitative measurement fueling n-butanol and soybean biodiesel in a constant volume chamber under various ambient temperatures
Haifeng Liu et al.
FUEL (2014)
Effects of premixed ratio on combustion characteristics of a homogeneous charge compression ignition-direct injection engine fueled with dimethyl ether
Junxing Hou et al.
JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY (2014)
Development and Validation of Chemical Kinetic Mechanism Reduction Scheme for Large-Scale Mechanisms
Hiew Mun Poon et al.
SAE INTERNATIONAL JOURNAL OF FUELS AND LUBRICANTS (2014)
Conceptual models for partially premixed low-temperature diesel combustion
Mark P. B. Musculus et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2013)
Progress in the production and application of n-butanol as a biofuel
Chao Jin et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2011)
Advanced compression-ignition engines-understanding the in-cylinder processes
John E. Dec
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2009)
Combustion and performance evaluation of a diesel engine fueled with biodiesel produced from soybean crude oil
D. H. Qi et al.
RENEWABLE ENERGY (2009)
Combustion and performance of heavy-duty diesel engines fuelled with dimethyl ether
J-J Zhang et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2008)