4.7 Article

Optimization of variable compression ratio diesel engine fueled with Zinc oxide nanoparticles and biodiesel emulsion using response surface methodology

Related references

Note: Only part of the references are listed.
Article Chemistry, Analytical

Nanoparticles as fuel additive for improving performance and reducing exhaust emissions of internal combustion engines

Saddam Khan et al.

Summary: Nanoparticles as fuel additives have shown exceptional performance in engineering applications, improving engine performance and reducing exhaust emissions. The addition of fuel additives enhances the thermo-physical properties, combustion characteristics, and enables the blending of biodiesel with diesel. Limited studies have been conducted on the health risk issues associated with the addition of fuel additives.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL ANALYTICAL CHEMISTRY (2022)

Article Green & Sustainable Science & Technology

Exploration of combustion behavior in a compression ignition engine fuelled with low-viscous Pimpinella anisum and waste cooking oil biodiesel blends

Dhinesh Balasubramanian et al.

Summary: This study aims to replace conventional fuel usage in diesel engines by incorporating a mixture of waste cooking oil biodiesel and low viscous Pimpinella anisum oil. Low viscous Pimpinella anisum oil was prepared using steam distillation method and blended with waste cooking oil biodiesel at different ratios. The experimental results showed that the mixture of diesel and low viscous Pimpinella anisum oil exhibited better heat release rate, cylinder pressure, and reduced emissions.

JOURNAL OF CLEANER PRODUCTION (2022)

Article Green & Sustainable Science & Technology

Influence of injection timing on performance and combustion characteristics of compression ignition engine working on quaternary blends of diesel fuel, mixed biodiesel, and t-butyl peroxide

Swarup Kumar Nayak et al.

Summary: This study examines the effects of adding t-butyl peroxide (TB) additive with diesel and biodiesel blends on the performance, emission, and combustion characteristics of a diesel engine. The results show that the quaternary blend D50-MB20TB30 with an advanced injection timing of 25 degrees bTDC improves engine performance and reduces pollutant emissions.

JOURNAL OF CLEANER PRODUCTION (2022)

Article Engineering, Mechanical

An experimental assessment of combustion and performance characteristics of a spark ignition engine fueled with co-fermentation biogas and gasoline dual fuel

Umit Agbulut et al.

Summary: The study established a pilot-scale biogas system and successfully produced biogas meeting the requirements, followed by experimental tests in an SI engine. Results indicated that as the methane ratio in biogas increases, cylinder pressure and exhaust temperature values increase, while brake specific fuel consumption decreases.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2022)

Article Engineering, Multidisciplinary

Review of artificial neural networks for gasoline, diesel and homogeneous charge compression ignition engine

Ibham Veza et al.

Alexandria Engineering Journal (2022)

Article Thermodynamics

Grasshopper optimization algorithm for diesel engine fuelled with ethanol-biodiesel-diesel blends

Ibham Veza et al.

Summary: The recently invented grasshopper optimization algorithm (GOA) was used to optimize the performance and emissions of a diesel engine running on a ternary fuel blend. Regression modeling was used to calculate the mathematical equations between the factors (ethanol ratio, biodiesel ratio, engine load) and the responses (BSFC, BTE, HC, CO2, NOx, CO). The results showed that the grasshopper optimization algorithm successfully maximized BTE and minimized the other responses, indicating its potential for improving engine performance and emissions.

CASE STUDIES IN THERMAL ENGINEERING (2022)

Article Energy & Fuels

Application of response surface methodology to optimize diesel engine parameters fuelled with pongamia biodiesel/diesel blends

Abhishek Sharma et al.

Summary: The study focused on optimizing input parameters of a diesel engine running on pongamia biodiesel to improve engine performance, including fuel injection pressure, timing, biodiesel blends, and engine load. The experimental and optimized results were compared at optimum input parameters, showing errors within the suggested range.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2021)

Article Energy & Fuels

Exergy analysis of small DI diesel engine fueled with waste cooking oil biodiesel

Veena Chaudhary et al.

Summary: The study found that the optimum operating conditions for minimum brake-specific fuel consumption and exergy destruction are achieved when the engine speed is at 1900 rev/min, load percentage is 75%, and the engine is fueled with B40.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2021)

Article Environmental Sciences

Effective utilization of mahua oil blended with optimum amount of Al2O3 and TiO2 nanoparticles for better performance in CI engine

Pradeep Purushothaman et al.

Summary: The research aims to improve the performance and reduce emissions of nanoparticle-blended mahua oil-fueled diesel engine by blending different concentrations of nanoparticles and emulsifying the mahua oil, resulting in increased efficiency and decreased exhaust emissions.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)

Article Engineering, Marine

Prediction of the density and viscosity of biodiesel and the influence of biodiesel properties on a diesel engine fuel supply system

Anh Tuan Hoang

Summary: The study demonstrated significant effects of varying biodiesel fractions and temperature on the dynamic viscosity and density of the fuel, as well as their impact on the fuel system, pump network, fuel filters, and spray characteristics. Results showed a 95% confidence level in the regression correlation equation regarding kinematic viscosity and density.

JOURNAL OF MARINE ENGINEERING AND TECHNOLOGY (2021)

Article Energy & Fuels

Comparison of engine characteristics with biodiesels produced from fresh and waste cooking oils

Abin Mathew et al.

Summary: The study suggests that using biodiesel produced from waste cooking oil (WCO) in automotive engines can reduce carbon monoxide and smoke emissions, but may slightly increase nitrogen oxide emissions. Additionally, there is almost no difference in engine performance between WCO biodiesel and fresh sunflower oil biodiesel.

BIOFUELS-UK (2021)

Article Thermodynamics

Effect of Sr@ZnO nanoparticles and Ricinus communis biodiesel-diesel fuel blends on modified CRDI diesel engine characteristics

Manzoore Elahi M. Soudagar et al.

Summary: The study evaluated the performance and emission characteristics of a modified CRDI diesel engine fueled by RCME20 biodiesel blended with Sr@ZnO nanoparticles. Results indicated that under certain conditions, the engine performance was enhanced and emissions were reduced compared to RCME20 fuel.

ENERGY (2021)

Article Engineering, Environmental

Soft computing-based modeling and emission control/reduction of a diesel engine fueled with carbon nanoparticle-dosed water/diesel emulsion fuel

Peyman Atarod et al.

Summary: This study modeled and optimized the performance and emission characteristics of a diesel engine fueled with carbon nanoparticle-dosed water/diesel emulsion fuel using soft computing techniques. The system accurately predicted output parameters and identified optimal operating conditions.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Thermodynamics

Wastes to energy: Improving the poor properties of waste tire pyrolysis oil with waste cooking oil methyl ester and waste fusel alcohol-A detailed assessment on the combustion, emission, and performance characteristics of a CI engine

Umit Agbulut et al.

Summary: This study shows that the addition of waste biodiesel and fusel oil can improve the performance characteristics of waste tire pyrolysis oil diesel fuel blends, including increasing brake thermal efficiency, reducing brake specific fuel consumption, and lowering carbon monoxide and nitrogen oxide emissions. Waste tire pyrolysis oil-diesel fuel blends can also be an effective tool for waste management and an alternative to fossil fuels.

ENERGY (2021)

Review Green & Sustainable Science & Technology

Rice bran oil-based biodiesel as a promising renewable fuel alternative to petrodiesel: A review

Anh Tuan Hoang et al.

Summary: The article explores the production of biofuels from free fatty acid-rich rice bran oil and evaluates its application in diesel engines in terms of effectiveness and economic feasibility. Research suggests that a blend of 20% rice bran oil biodiesel and 80% petrodiesel is the most optimal composition considering both technical and economic aspects.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Article Thermodynamics

Impact of aluminium oxide nanoparticles as an additive in diesel-methanol blends on a modern DI diesel engine

Jiangjun Wei et al.

Summary: The study demonstrates that adding aluminum oxide (AL(2)O(3)) nanoparticles to diesel-methanol blends can significantly improve engine performance, including enhancing peak in-cylinder pressure and thermal efficiency, reducing ignition delay and combustion duration, as well as decreasing fuel consumption and energy consumption, and lowering CO, HC, and smoke emissions.

APPLIED THERMAL ENGINEERING (2021)

Article Energy & Fuels

Numerical and experimental evaluation on the pooled effect of waste cooking oil biodiesel/diesel blends and exhaust gas recirculation in a twin-cylinder diesel engine

Dhinesh Balasubramanian et al.

Summary: With the increasing global concern on diesel engine exhaust emissions, biofuels serve as a better alternative for compression ignition engines, but may lead to increased nitrogen oxide emissions which are harmful to human health. Research found that B20 blend fuel is the most effective in reducing emissions, particularly with a maximum reduction of unburned hydrocarbon, carbon monoxide, smoke, and carbon dioxide emissions. Increasing exhaust gas recirculation (EGR) rates can effectively reduce NOx emissions but may result in higher emissions of other pollutants.
Article Energy & Fuels

Experimental investigation to reduce environmental pollutants using biofuel nano-water emulsion in thermal barrier coated engine

P. Elumalai et al.

Summary: The study explores the potential of Palmyra palm biofuel in improving engine performance and reducing emissions, demonstrating that measures such as adding nano-particles and thermal barrier coatings can effectively enhance combustion efficiency and reduce emissions.
Article Energy & Fuels

Performance, emission and combustion characteristics of unmodified diesel engine with titanium dioxide (TiO2) nano particle along with water-in-diesel emulsion fuel

R. Vigneswaran et al.

Summary: This study investigated the impact of emulsion fuel with TiO2 nanoparticle additive on the engine attributes of a mono-cylinder diesel powertrain. Results showed improvements in brake thermal efficiency and reduced emissions compared to diesel fuel, particularly at full loads.
Review Energy & Fuels

Potential of Waste Cooking Oil Biodiesel as Renewable Fuel in Combustion Engines: A Review

Haseeb Yaqoob et al.

Summary: Researchers are exploring renewable fuels, with waste cooking oil biodiesel considered one of the best alternative fuels globally, reducing emissions by 85%. Performance-wise, brake-specific fuel consumption increases while energy consumption, power, and torque decrease. Economically, waste cooking oil biodiesel is a suitable choice in terms of technology, economics, environment, and tribology.

ENERGIES (2021)

Article Thermodynamics

Combustion Characteristics of Direct Injection Diesel Engine Fueled with Dispersant-mixed Al2O3 Nanoparticle-added Biodiesel Blend

S. Jaikumar et al.

Summary: This study investigates the stability of nanoparticles in biodiesel blend B20 and the combustion analysis of a direct injection single-cylinder diesel engine. The addition of aluminum oxide nanoparticles to B20 showed slight improvement in combustion characteristics. The addition of nanoparticles mixed with dispersant QPAN 80 resulted in significant enhancement in combustion properties compared to adding nanoparticles alone.

INTERNATIONAL JOURNAL OF THERMOPHYSICS (2021)

Article Green & Sustainable Science & Technology

Effects of Fe2O3 and Al2O3 nanoparticle-diesel fuel blends on the combustion, performance and emission characteristics of a diesel engine

Mohammad Nouri et al.

Summary: The research found that adding Fe2O3 and Al2O3 nanoparticles to diesel fuel can improve combustion efficiency, performance, and emission characteristics of a diesel engine. Fe2O3 fuel blends showed better performance in increasing power, thermal efficiency, and reducing CO emissions. On the other hand, Al2O3 nanoparticle additives performed better in reducing BSFC, NOx, and SO2 emissions.

CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY (2021)

Review Chemistry, Applied

Combustion behavior, performance and emission characteristics of diesel engine fuelled with biodiesel containing cerium oxide nanoparticles: A review

Anh Tuan Hoang

Summary: The addition of CeO2 nanoparticles into biodiesel has shown positive effects on improving fuel performance and emissions of diesel engines. However, further research is needed to investigate the impacts of CeO2 nanoparticles on particulate matter emissions, human health, and the environment.

FUEL PROCESSING TECHNOLOGY (2021)

Article Green & Sustainable Science & Technology

Smart control strategy for effective hydrocarbon and carbon monoxide emission reduction on a conventional diesel engine using the pooled impact of pre-and post-combustion techniques

Nadana Kumar Vinayagam et al.

Summary: The global concern over climate change and its environmental impact caused by humans is evident. Research shows that Silkworm Oil Methyl Ester (SWOME) prepared through a two-step transesterification process, with the enhancement of properties by adding Nano additive Aluminium Oxide (Al2O3). SWOME not only meets ASTM standards in physicochemical properties testing, but also exhibits good performance and combustion effects in single-cylinder diesel engine tests.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Energy & Fuels

Hydrogen-Enriched Biogas Premixed Charge Combustion and Emissions in Direct Injection and Indirect Injection Diesel Dual Fueled Engines: A Comparative Study

Van Ga Bui et al.

Summary: This study compared the combustion and emissions performance of hydrogen-enriched biogas dual-fuel engines with two injection methods, finding that the IDIDF engine performs better in terms of engine work and emissions of CO, soot, and noise, but has higher NOx emissions.

JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2021)

Review Energy & Fuels

Prospective review on the application of biofuel 2,5-dimethylfuran to diesel engine

Anh Tuan Hoang et al.

Summary: The paper provides a comprehensive analysis of the catalyst-based synthesis of DMF from lignocellulosic biomass and evaluates the performance and emission characteristics of diesel engines fueled with DMF in comparison to diesel fuel. The study found that the engine performance with a blend of 10%v/v of DMF in diesel fuel was similar to that of pure diesel, with improved emissions of PM, NOx, CO, and HC but increased soot tendency due to the aromatic ring content of DMF.

JOURNAL OF THE ENERGY INSTITUTE (2021)

Review Chemistry, Multidisciplinary

Advances in Diesel-LNG Internal Combustion Engines

Alberto Boretti

APPLIED SCIENCES-BASEL (2020)

Review Thermodynamics

Recent progress on mixing technology for water-emulsion fuel: A review

Agus Sartomo et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

Article Thermodynamics

Diesel engine performance, emissions and combustion characteristics of castor oil blends using pyrolysis

Youssef A. Attai et al.

ADVANCES IN MECHANICAL ENGINEERING (2020)

Review Thermodynamics

Progress in utilisation of waste cooking oil for sustainable biodiesel and biojet fuel production

Brandon Han Hoe Goh et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

Article Engineering, Environmental

Optimal utilization of ZnO nanoparticles blended diesel-water emulsion by varying compression ratio of a VCR diesel engine

R. Hussain Vali et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

Proceedings Paper Green & Sustainable Science & Technology

Applicability of Fuel Injection Techniques for Modern Diesel Engines

Anh Tuan Hoang

PROCEEDINGS OF THE 2019 1ST INTERNATIONAL CONFERENCE ON SUSTAINABLE MANUFACTURING, MATERIALS AND TECHNOLOGIES (2020)

Article Thermodynamics

Control of combustion phasing and operating range extension of natural gas PCCI engines using ozone species

Mohammad Mandi Salahi et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

Review Energy & Fuels

An overview on the light alcohol fuels in diesel engines

Yahya Celebi et al.

Article Chemistry, Physical

Commercial vehicle auxiliary loads powered by PEM fuel cell

N. Matulic et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Proceedings Paper Engineering, Mechanical

A review of the performance and emissions of nano additives in diesel fuelled compression ignition-engines

M. Norhafana et al.

1ST INTERNATIONAL POSTGRADUATE CONFERENCE ON MECHANICAL ENGINEERING (IPCME2018) (2019)

Review Environmental Sciences

Environmental impacts the of production and use of biodiesel

Snezana Zivkovic et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2018)

Article Engineering, Mechanical

Experimental investigation on the combustion, performance and emission characteristics of a diesel engine using water emulsified diesel prepared by ultrasonication

Pijush Kanti Mondal et al.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2018)

Article Transportation Science & Technology

Experimental Investigation of Ethanol-Diesel-Butanol Blends in a Compression Ignition Engine by Modifying the Operating Parameters

B. Prabakaran et al.

SAE INTERNATIONAL JOURNAL OF ENGINES (2018)

Article Green & Sustainable Science & Technology

The Performance of A Diesel Engine Fueled With Diesel Oil, Biodiesel and Preheated Coconut Oil

Tuan Anh Hoang et al.

INTERNATIONAL JOURNAL OF RENEWABLE ENERGY DEVELOPMENT-IJRED (2017)

Article Engineering, Multidisciplinary

Comparison of linear regression and artificial neural network model of a diesel engine fueled with biodiesel-alcohol mixtures

Erdi Tosun et al.

ALEXANDRIA ENGINEERING JOURNAL (2016)

Article Engineering, Environmental

Effects of water-emulsified fuel on a diesel engine generator's thermal efficiency and exhaust

Jin-Yuan Syu et al.

JOURNAL OF THE AIR & WASTE MANAGEMENT ASSOCIATION (2014)

Proceedings Paper Engineering, Mechanical

Working Characteristics of a DICI Engine by Using Water Emulsion Biodiesel Fuels

Srinivasa M. Rao et al.

DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH (2014)

Article Engineering, Multidisciplinary

Studying the effect of compression ratio on an engine fueled with waste oil produced biodiesel/diesel fuel

Mohammed El Kassaby et al.

ALEXANDRIA ENGINEERING JOURNAL (2013)

Article Chemistry, Multidisciplinary

Increased hot-plate ignition probability for nanoparticle-laden diesel fuel

Himanshu Tyagi et al.

NANO LETTERS (2008)