Stochastic MCDM with normal approximation of the uniformly distributed variables for assessing sustainable insulation materials

Article Computer Science, Artificial Intelligence

Extension of interval-valued Pythagorean FDOSM for evaluating and benchmarking real-time SLRSs based on multidimensional criteria of hand gesture recognition and sensor glove perspectives

Mohammed S. Al-Samarraay et al.

Summary: A new extension method has been developed for evaluating and benchmarking SLRSs, showing high variation in preferences among different Decision Makers for real-time SLRS, and different rankings were obtained from group benchmarking.

APPLIED SOFT COMPUTING (2022)

Add to Collection

Editorial Material Environmental Sciences

Sustainable production in circular economy: aerogel upscaling production

Handojo Djati Utomo et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2022)

Add to Collection

Review Environmental Sciences

Recycling/reuse of plastic waste as construction material for sustainable development: a review

Pooja Lamba et al.

Summary: By thoroughly reviewing and summarizing the use of plastic waste in construction materials, it is evident that this innovative method has dual benefits, reducing pollution to the environment from waste and mitigating the negative impact of the construction industry on the environment.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2022)

Add to Collection

Review Environmental Sciences

Thermal performance of energy-efficient buildings for sustainable development

Dhanasingh Sivalinga Vijayan et al.

Summary: The thermal performance of civil structures is crucial in civil engineering and architecture, impacting residents' comfort levels and energy efficiency. Designing buildings according to thermal comfort and reducing carbon emissions, air flows, and energy consumption is essential. Different types of buildings, including residential, commercial, and educational structures, were analyzed for their thermal performance in various climatic conditions.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2022)

Add to Collection

Article Environmental Sciences

Lifecycle cost analysis of an insulated duct with an air gap

Dileep Kumar et al.

Summary: This study introduces an air gap between insulation and duct surface to reduce the quantity of insulation and uses lifecycle cost (LCC) analysis to determine the economic benefits. Results show that ducts with an air gap have lower insulation thickness, resulting in maximum cost savings and shorter payback periods. Among different insulation materials, insulated duct with expanded polystyrene was found to be cost-effective with maximum cost savings and a short payback period, while the air gap was most effective for ducts insulated with rock wool. In conclusion, an air gap is a cost-effective design approach for duct applications.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2022)

Add to Collection

Article Computer Science, Artificial Intelligence

COPRAS method based on interval-valued hesitant Fermatean fuzzy sets and its application in selecting desalination technology

Peide Liu et al.

Summary: This paper introduces the concept of interval-valued hesitant Fermatean fuzzy set (IVHFFS) and discusses its basic concept, operations, and distance measures. Some aggregation operators (AOs) are proposed based on IVHFFSs for decision analysis. The study validates the method on the selection process of desalination technology and identifies the most significant criteria influencing the process.

APPLIED SOFT COMPUTING (2022)

Add to Collection

Article Computer Science, Artificial Intelligence

An extended interval-valued Pythagorean fuzzy WASPAS method based on new similarity measures to evaluate the renewable energy sources

Abdullah Al-Barakati et al.

Summary: This paper investigates the selection of renewable energy sources and proposes an integrated model based on the Weighted Aggregated Sum Product Assessment method. By combining subjective and objective weights, the method provides an effective solution to decision-making problems. The results show that wind energy is the best option for selecting renewable energy sources across various criteria.

APPLIED SOFT COMPUTING (2022)

Add to Collection

Review Materials Science, Paper & Wood

Recent developments in biomass derived cellulose aerogel materials for thermal insulation application: a review

Sourav Sen et al.

Summary: This article introduces cellulose aerogel as an attractive thermal insulation material with excellent physical and chemical properties, and discusses its application prospects in energy-saving insulation in the building industry.

CELLULOSE (2022)

Add to Collection

Article Environmental Sciences

Thermal insulation materials in architecture: a comparative test study with aerogel and rock wool

Hacer Mutlu Danaci et al.

Summary: Thermal insulation materials produced with nanotechnology have lower thermal conductivity coefficients compared to other thermal insulation materials. Analysis on the Revit-2019 model shows that aerogel thermal insulation material provides 8% savings in cooling loads compared to rock wool. However, the initial investment cost is higher for aerogel-added materials. Developing competitive and sustainable materials is crucial as suggested by the literature review.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2022)

Add to Collection

Article Environmental Studies

Theory of planned behavior in predicting the construction of eco-friendly houses

Alphonsa K. Jose et al.

Summary: The study aimed to explore the applicability of theory of planned behavior in constructing eco-friendly houses. Results showed that behavioral intention to build eco-friendly house was the strongest predictor of actual behavior. Behavioral intention mediated the relationship of attitudinal, normative, and control variables with the behavior of constructing eco-friendly houses.

MANAGEMENT OF ENVIRONMENTAL QUALITY (2022)

Add to Collection

Article Construction & Building Technology

A New Hybrid MCDM Model for Insulation Material Evaluation for Healthier Environment

Berrak Aksakal et al.

Summary: Choosing appropriate thermal insulation materials is an important method for reducing building energy demand. This study integrates three different multi-criteria decision making methods to determine the best insulation material. According to the results, polyisocyanurate is identified as the optimal insulation material.

BUILDINGS (2022)

Add to Collection

Article Construction & Building Technology

Mechanical and durability characterization of a new textile waste micro-fiber reinforced cement composite for building applications

Payam Sadrolodabaee et al.

Summary: The study found that textile waste fiber can be a potential reinforcement material in construction materials, enhancing the performance of cement paste at the optimal dosage. Although the flexural resistance and toughness of the TWF composite are slightly lower than the KPF control, the compressive strength, stiffness, and durability properties have been improved.

CASE STUDIES IN CONSTRUCTION MATERIALS (2021)

Add to Collection

Article Materials Science, Composites

Thermal and Mechanical Properties of Green Insulation Composites Made from Cannabis and Bark Residues

Konstantinos Ninikas et al.

Summary: The addition of hemp fibers improves the mechanical properties of the insulation particleboards, while the thermal conductivity increases unfavorably with higher hemp content. Among the different panel types, the 70:30 ratio showed the best mechanical properties and optimal thermal conductivity, indicating successful production of low density insulation boards using waste raw materials.

JOURNAL OF COMPOSITES SCIENCE (2021)

Add to Collection

Article Construction & Building Technology

Thermal resistance of multi-functional panels in cold-climate regions

Hadia Awad et al.

Summary: Energy efficiency and sustainability have been a focus of attention in recent years, with buildings accounting for a significant portion of energy use and greenhouse gas emissions. Studies in Canada have explored the use of innovative multi-functional panels to improve thermal performance in residential buildings under different climatic conditions. Ongoing research aims to provide practical guidelines for utilizing environmentally friendly materials like wood fiber for sustainable insulation in the North American housing market.

JOURNAL OF BUILDING ENGINEERING (2021)

Add to Collection

Article Construction & Building Technology

Innovative module of expanded cork agglomerate for green vertical systems

Andreia Cortes et al.

Summary: Green vertical systems (GVSs) offer various benefits for buildings and urban environment, but their sustainability has been questioned. A comparative life cycle analysis was conducted to propose a new modular GVS design based on insulation cork boards (ICBs), with medium density ICB modules identified as a potentially eco-friendlier alternative to current systems. Mechanical characterization was also carried out to support the environmental performance of the new ICB module.

BUILDING AND ENVIRONMENT (2021)

Add to Collection

Article Computer Science, Artificial Intelligence

Ordering of interval-valued Fermatean fuzzy sets and its applications

S. Jeevaraj

Summary: Fermatean fuzzy sets (FFSs) introduced by Senapati and Yager (2019) can handle imprecise and incomplete information better than intuitionistic fuzzy sets by Atanassov (1986). The authors establish basic mathematical operations on FFSs and introduce score and accuracy functions for comparing any two arbitrary FFSs. They also introduce interval-valued Fermatean fuzzy sets (IVFFSs) and establish various score functions, comparing them for efficacy in multi-criteria decision-making problems.

EXPERT SYSTEMS WITH APPLICATIONS (2021)

Add to Collection

Article Computer Science, Artificial Intelligence

Evaluating community question-answering websites using interval-valued intuitionistic fuzzy DANP and TODIM methods

Ming Li et al.

Summary: This study proposes an approach to evaluate the quality of CQA websites, which includes constructing a CQA service quality model and using a multicriteria decision-making method in an interval-valued intuitionistic fuzzy environment for weight determination and ranking. The experimental results, sensitivity analysis, and comparative analysis demonstrate the feasibility and practicality of this approach.

APPLIED SOFT COMPUTING (2021)

Add to Collection

Article Computer Science, Artificial Intelligence

Multi-criteria decision making with interval type 2 fuzzy Bonferroni mean

Kuo-Ping Chiao

Summary: This paper develops new aggregation models based on QGOWA and BM operators with IT2FS for interrelated multi-criteria decision making problems. The research focuses on addressing the interrelationship between decision criteria in MCDM and proposes various extended aggregation models.

EXPERT SYSTEMS WITH APPLICATIONS (2021)

Add to Collection

Article Construction & Building Technology

Life cycle assessment of interior partition walls: Comparison between functionality requirements and best environmental performance

Yovanna Elena Valencia-Barba et al.

Summary: This research analyzed 44 interior partition walls in the Spanish residential sector and found that the product stage has the greatest contribution to environmental impact. It emphasizes the importance of considering multi-layer components as an entire element for more representative and trustworthy results in real practice application.

JOURNAL OF BUILDING ENGINEERING (2021)

Add to Collection

Article Computer Science, Information Systems

An effective blockchain evaluation system based on entropy-CRITIC weight method and MCDM techniques

Shakeel Zafar et al.

Summary: Public blockchain enables decentralized trust models and attracts developers and users. Choosing a suitable public blockchain platform is challenging due to the variety of features in immature blockchain ecosystems. This paper uses MCDM to rank suitable public blockchain platforms, introduces ECWM, applies three MCDM techniques, and ranks blockchains based on popularity, sustainability, and profitability.

PEER-TO-PEER NETWORKING AND APPLICATIONS (2021)

Add to Collection

Article Computer Science, Artificial Intelligence

Offshore wind farm site selection using interval rough numbers based Best-Worst Method and MARCOS

Muhammet Deveci et al.

Summary: The development of offshore wind farms has become increasingly important over the past 20 years due to higher average wind speeds at sea. A new hybrid approach integrating Interval Rough Numbers into Best-Worst Method and Measurement of Alternatives and Ranking according to Compromise Solution was introduced in this study for intelligent decision support in choosing the best offshore wind farm site. The results demonstrated the feasibility of the proposed approach and identified Bozcaada as the most suitable site.

APPLIED SOFT COMPUTING (2021)

Add to Collection

Article Construction & Building Technology

Hygrothermal performance, energy use and embodied emissions in straw bale buildings

Chuen Hon (Alex) Koh et al.

Summary: Straw bale is a low embodied energy and technically acceptable thermal insulation material. This study systematically explores the hygrothermal and energy performance of straw bale buildings in different climate conditions and emphasizes the importance of material selection and climate adaptation. Overall, properly designed straw bale buildings show robust hygrothermal performance and achieve minimal energy use with low embodied emissions.

ENERGY AND BUILDINGS (2021)

Add to Collection

Article Construction & Building Technology

Are nZEB design solutions environmental sustainable? Sensitive analysis for building envelope configurations and photovoltaic integration in different climates

Rosa Francesca De Masi et al.

Summary: The study suggests finding a balance between energy saving measures and renewable energy sources to minimize environmental impacts. In Mediterranean and Continental climates, increasing insulation levels or using innovative materials like vacuum insulation panels may not be cost-effective in terms of environmental sustainability.

JOURNAL OF BUILDING ENGINEERING (2021)

Add to Collection

Article Construction & Building Technology

Characterization of Buriti (Mauritia flexuosa) Foam for Thermal Insulation and Sound Absorption Applications in Buildings

Felippe Fabricio dos Santos Siqueira et al.

Summary: Exploring new construction materials such as Buriti foam, which is natural, renewable, and environmentally friendly, shows potential for application in buildings due to its thermal insulation properties. However, its limited sound absorption performance, attributed to the lack of open porosity, requires further research for optimization in building applications.

BUILDINGS (2021)

Add to Collection

Article Construction & Building Technology

Comparative assessment of insulated concrete wall technologies and wood-frame walls in residential buildings: a multi-criteria analysis of hygrothermal performance, cost, and environmental footprints

Farhad Amiri Fard et al.

Summary: The study aims to compare three different types of exterior wall systems, focusing on performance, cost efficiency, and environmental impacts. Comparison will be conducted based on hygrothermal performance and whole life cost analysis, followed by assessment of environmental footprints.

ADVANCES IN BUILDING ENERGY RESEARCH (2021)

Add to Collection

Article Environmental Studies

Enhancing public building energy efficiency using the response surface method: An optimal design approach

Yang Liu et al.

Summary: This paper focuses on the energy consumed during the building operation period and aims to reduce total energy consumption by optimizing relevant design parameters. A building energy consumption model is established based on the West Twelfth Teaching Building of Huazhong University of Science & Technology, and ten factors affecting building energy consumption are analyzed from the perspective of energy conservation. Six factors with the most potential for energy savings are identified through partial factorial design tests.

ENVIRONMENTAL IMPACT ASSESSMENT REVIEW (2021)

Add to Collection

Article Energy & Fuels

Building Thermo-Modernisation Solution Based on the Multi-Objective Optimisation Method

Malgorzata Basinska et al.

ENERGIES (2020)

Add to Collection

Article Construction & Building Technology

Uncertain multi-criteria sustainability assessment of green building insulation materials

Dalia Streimikiene et al.

ENERGY AND BUILDINGS (2020)

Add to Collection

Article Green & Sustainable Science & Technology

An Evaluation System for Sustainable Urban Space Development Based in Green Urbanism Principles-A Case Study Based on the Qin-Ba Mountain Area in China

Xiaohui Yu et al.

SUSTAINABILITY (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Comparative analysis of building insulation material properties and performance

Dileep Kumar et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Developing a two-criteria framework to rank thermal insulation materials in nearly zero energy buildings using multi-objective optimization approach

Nima Amani et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Construction & Building Technology

Sarooj mortar: From a traditional building material to an engineered pozzolan -mechanical and thermal properties study

M. S. Meddah et al.

JOURNAL OF BUILDING ENGINEERING (2020)

Add to Collection

Article Environmental Studies

Improving maintenance management practices on green building projects

Zul-Atfi Ismail

MANAGEMENT OF ENVIRONMENTAL QUALITY (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

An integrated stochastic fuzzy MCDM approach to the balanced scorecard-based service evaluation

Hasan Dincer et al.

MATHEMATICS AND COMPUTERS IN SIMULATION (2019)

Add to Collection

Article Construction & Building Technology

Water retention and drainage capability of expanded cork agglomerate boards intended for application in green vertical systems

Andreia Cortes et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

Investigation of the thermal behavior of the natural insulation materials for low temperature regions

Ayaz Ahmed et al.

JOURNAL OF BUILDING ENGINEERING (2019)

Add to Collection

Article Construction & Building Technology

Assessment of the contributions of different flat roof types to achieving sustainable development

Salvador Guzman-Sanchez et al.

BUILDING AND ENVIRONMENT (2018)

Add to Collection

Article Construction & Building Technology

Sustainability evaluation of retrofitting solutions for rural buildings through life cycle approach and multi-criteria analysis

L. Rocchi et al.

ENERGY AND BUILDINGS (2018)

Add to Collection

Article Computer Science, Artificial Intelligence

An MCDM method for cloud service selection using a Markov chain and the best-worst method

Falak Nawaz et al.

KNOWLEDGE-BASED SYSTEMS (2018)

Add to Collection

Review Computer Science, Interdisciplinary Applications

A systematic review of Augmented Reality content-related techniques for knowledge transfer in maintenance applications

Inigo Fernandez del Amo et al.

COMPUTERS IN INDUSTRY (2018)

Add to Collection

Article Construction & Building Technology

Thermal modelling of insulator for energy saving in existing residential building

Megha Jain et al.

JOURNAL OF BUILDING ENGINEERING (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Determination and Characterization of the Wool Fiber Yield of Kenyan Sheep Breeds: An Economically Sustainable Practical Approach for Kenya

Hafeezullah Memon et al.

FIBERS (2018)

Add to Collection

Review Green & Sustainable Science & Technology

A review on insulation materials for energy conservation in buildings

L. Aditya et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Add to Collection

Article Construction & Building Technology

Life Cycle Assessment (LCA) of building materials for the evaluation of building sustainability: the case of thermal insulation materials

Rocio Carabano et al.

REVISTA DE LA CONSTRUCCION (2017)

Add to Collection

Proceedings Paper Green & Sustainable Science & Technology

Fitness: sheep-wool and hemp sustainable insulation panels

R. Pennacchio et al.

8TH INTERNATIONAL CONFERENCE ON SUSTAINABILITY IN ENERGY AND BUILDINGS, SEB-16 (2017)

Add to Collection

Article Construction & Building Technology

A sustainability assessment of advanced materials for novel housing solutions

Pouya Samani et al.

BUILDING AND ENVIRONMENT (2015)

Add to Collection

Article Construction & Building Technology

Acoustic characterization of natural fibers for sound absorption applications

Umberto Berardi et al.

BUILDING AND ENVIRONMENT (2015)

Add to Collection

Article Construction & Building Technology

Development of a multi-objective optimization tool for selecting thermal insulation materials in sustainable designs

B. C. Roberts et al.

ENERGY AND BUILDINGS (2015)

Add to Collection

Review Engineering, Multidisciplinary

Solving Civil Engineering Problems by Means of Fuzzy and Stochastic MCDM Methods: Current State and Future Research

Jurgita Antucheviciene et al.

MATHEMATICAL PROBLEMS IN ENGINEERING (2015)

Add to Collection

Article Construction & Building Technology

Development of the random simulation model for estimating the effective thermal conductivity of insulation materials

Ru Ji et al.

BUILDING AND ENVIRONMENT (2014)

Add to Collection

Article Construction & Building Technology

Model integrated of life-cycle costing and dynamic thermal simulation (MILD) to evaluate roof insulation materials for existing livestock buildings

Maria Elena Menconi et al.

ENERGY AND BUILDINGS (2014)

Add to Collection

Article Construction & Building Technology

Multi-objective optimization for building retrofit strategies: A model and an application

Ehsan Asadi et al.

ENERGY AND BUILDINGS (2012)

Add to Collection

Article Acoustics

Sustainable acoustic absorbers from the biomass

David J. Oldham et al.

APPLIED ACOUSTICS (2011)

Add to Collection

Article Construction & Building Technology

Recycling value of building materials in building assessment systems

Mohammad Djavad Saghafi et al.

ENERGY AND BUILDINGS (2011)

Add to Collection

Article Construction & Building Technology

Development and performance evaluation of natural thermal-insulation materials composed of renewable resources

Azra Korjenic et al.

ENERGY AND BUILDINGS (2011)

Add to Collection

Article Engineering, Multidisciplinary

Extension of VIKOR method for decision making problem with interval numbers

Mohammad Kazem Sayadi et al.

APPLIED MATHEMATICAL MODELLING (2009)

Add to Collection

Article Management

Implementing stochastic multicriteria acceptability analysis

Tommi Tervonen et al.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2007)

Add to Collection

Article Management

On comparing interval numbers

A Sengupta et al.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2000)

Add to Collection

Stochastic MCDM with normal approximation of the uniformly distributed variables for assessing sustainable insulation materials

Related references

Export Citation

Share Paper