Related references
Note: Only part of the references are listed.Laser techniques for dissimilar joining of aluminum alloys to steels: A critical review
Jin Yang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2022)
Investigation on material characteristics and fatigue crack behavior of thermite welded rail joint
Yang Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Response of ferrite, bainite, martensite, and retained austenite to a fire cycle in a fire-resistant steel
J. D. Escobar et al.
MATERIALS CHARACTERIZATION (2021)
A multi-scale modelling framework for anisotropy prediction in aluminium alloy sheet and its application in the optimisation of the deep-drawing process
Wencheng Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)
Comparisons between beam and continuum models for modelling wheel-rail impact at a singular rail surface defect
Chen Shen et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)
Numerical study on the ratcheting performance of rail flash butt welds in heavy haul operations
Hang Su et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)
Measurement of deformation of the concrete sleepers under different support conditions using non-contact laser speckle imaging sensor
Yong Pang et al.
ENGINEERING STRUCTURES (2020)
Influence of welding on microstructure and strength of rail steel
Yasin Sarikavak et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Development of a non-contact and non-destructive laser speckle imaging system for remote sensing of anisotropic deformation around fastener holes
Yong Pang et al.
NDT & E INTERNATIONAL (2020)
Enhanced laser speckle optical sensor for in situ strain sensing and structural health monitoring
Yong Pang et al.
OPTICS LETTERS (2020)
Ratcheting behaviour of flash butt welds in heat-treated hypereutectoid steel rails under uniaxial and biaxial cyclic loadings
Hang Su et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
A 3D phenomenological yield function with both in and out-of-plane mechanical anisotropy using full-field crystal plasticity spectral method for modelling sheet metal forming of strong textured aluminum alloy
Wencheng Liu et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)
Microstructure-based approach to the evaluation of welded joints of bainitic rails designed for high-speed railways
Aleksandra Krolicka et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2020)
Combining resistance spot welding and friction element welding for dissimilar joining of aluminum to high strength steels
J. P. Oliveira et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Influence of laser strengthening techniques on anti-wear and anti-fatigue properties of rail welding joint
H. C. Shi et al.
ENGINEERING FAILURE ANALYSIS (2019)
An investigation of plastic behaviour in cold-rolled aluminium alloy AA2024-T3 using laser speckle imaging sensor
Yong Pang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Extrusion behavior of impurities in upsetting process of rail flash butt welding based on finite element method
Jiao Zhang et al.
JOURNAL OF MATERIALS RESEARCH (2019)
Theoretical analysis on performance of digital speckle pattern: uniqueness, accuracy, precision, and spatial resolution
Yong Su et al.
OPTICS EXPRESS (2019)
Microstructure and mechanical properties of a flash butt welded pearlitic rail
Rodrigo Rangel Porcaro et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Effect of upset pressure on texture evolution and its correlation to toughness in flash butt joints
Nikhil Shajan et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2018)
Numerical study of wheel-rail impact contact solutions at an insulated rail joint
Zhen Yang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
Microstructure evolution and mechanical properties of flash butt-welded, Inconel718 joints
Jialin Shen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Spatial uncertainty of measurement errors in digital image correlation
Yong Su et al.
OPTICS AND LASERS IN ENGINEERING (2018)
Influence of flash butt welding parameters on microstructure and mechanical properties of HSLA 590CL welded joints in wheel rims
Ping Lu et al.
JOURNAL OF MATERIALS RESEARCH (2017)
Comparison of residual stresses on long rolled profiles measured by X-ray diffraction, ring core and the sectioning methods and simulated by FE method
Chantal Bouffioux et al.
THIN-WALLED STRUCTURES (2016)
Microstructural characterisation of rolling contact fatigue damage in flashbutt welds
Peter Mutton et al.
WEAR (2016)
Microstructures and mechanical properties of flash butt welded high strength steel joints
Chenyao Xi et al.
MATERIALS & DESIGN (2016)
An experimental investigation on flash butt welded rails
Kadir Ozakgul et al.
ENGINEERING FAILURE ANALYSIS (2015)
Evaluation of fatigue fracture mechanism in a flash butt welding joint of a U75V type steel for railroad applications
Xiaohui Zhao et al.
ENGINEERING FAILURE ANALYSIS (2015)
An efficient computational approach to evaluate the ratcheting performance of rail steels under cyclic rolling contact in service
Chung Lun Pun et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2015)
Investigation of welding residual stress in flash-butt joint of U71Mn rail steel by numerical simulation and experiment
Ninshu Ma et al.
MATERIALS & DESIGN (2015)
Flash Butt Rail Weld Vertical Fractures
Daniel H. Stone et al.
JOURNAL OF FAILURE ANALYSIS AND PREVENTION (2015)
A 3D dynamic model to investigate wheel-rail contact under high and low adhesion
K. D. Vo et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2014)
Effect of vanadium and chromium on the microstructural features of V-Cr-Mn-Ni spheroidal carbide cast irons
V. G. Efremenko et al.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2014)
Investigation on the damage mechanism and prevention of heavy-haul railway rail
W. J. Wang et al.
ENGINEERING FAILURE ANALYSIS (2013)
Effects of flashing and upset sequences on microstructure, hardness, and tensile properties of welded structural steel joints
Constance W. Ziemian et al.
MATERIALS & DESIGN (2012)
On the formation and nature of quasi-cleavage fracture surfaces in hydrogen embrittled steels
May L. Martin et al.
ACTA MATERIALIA (2011)
Experimental review of metallurgical flash weld defects in welded joints: essence of flat spots, penetrators and oxide inclusions
A. -N. Rasanen et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2011)
Advanced metallurgical alloy design and thermomechanical processing for rails steels for North American heavy haul use
R. Ordonez Olivares et al.
WEAR (2011)
Very early stage rolling contact fatigue crack growth in pearlitic rail steels
J. E. Garnham et al.
WEAR (2011)
Experimental and numerical investigations: Alleviating tensile residual stresses in flash-butt welds by localised rapid post-weld heat treatment
David Tawfik et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
An investigation into the causes of squats - Correlation analysis and numerical modeling
Zili Li et al.
WEAR (2008)
Flash butt welding of high manganese steel crossing and carbon steel
Fucheng Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Verification of residual stresses in flash-butt-weld rails using neutron diffraction
David Tawfik et al.
PHYSICA B-CONDENSED MATTER (2006)
Transient thermal stress analysis on rapid post-weld heat treatments applied to flash butt welded rails
D. Tawfik et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2006)
Mechanisms of mixed mode fatigue crack propagation at rail butt-welds
H Desimone et al.
INTERNATIONAL JOURNAL OF FATIGUE (2006)
Fatigue crack growth in a welded rail under the influence of residual stresses
A Skyttebol et al.
ENGINEERING FRACTURE MECHANICS (2005)
Weldability of austenitic manganese steel
J Mendez et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Microstructure and residual stress variations in weld zone of flash-butt welded railroads
H Mansouri et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2004)
Effect of local induction heat treatment on the induced residual stresses in the web region of a welded rail
H Mansouri et al.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2004)
Subpixel displacement and deformation gradient measurement using digital image/speckle correlation (DISC)
P Zhou et al.
OPTICAL ENGINEERING (2001)