☆ 4.7 Article

Quantitative modeling and bio-inspired optimization the clamping load on the bipolar plate in PEMFC

ENERGY (2023)

Related references

Note: Only part of the references are listed.

Article Thermodynamics

Multi-objective optimization of graded catalyst layer to improve performance and current density uniformity of a PEMFC

Ruijia Fan et al.

Summary: This study investigates the importance of optimizing the use of compositions (platinum and ionomer) in cathode catalyst layers (CCLs) in proton exchange membrane fuel cells (PEMFCs) to enhance performance and improve current density uniformity. The results show a trade-off between output performance and current density uniformity, and a multi-objective optimization approach is used to improve both indicators. Compared to the base case, significant improvements in current density uniformity and output performance are achieved.

ENERGY (2023)

Add to Collection

Article Thermodynamics

Experimental study of the influence of dynamic load cycle and operating parameters on the durability of PEMFC

Tiankuo Chu et al.

Summary: The study investigated the impact of different dynamic load cycles on the performance of proton exchange membrane fuel cells, finding that DLC-02 exhibited lower voltage degradation at low current densities, especially in the first 400 hours. The evolution of resistance types and a proposed formula for calculating polarization losses were key findings in distinguishing the sources of voltage loss.

ENERGY (2022)

Add to Collection

Article Thermodynamics

Current density and temperature distribution measurement and homogeneity analysis for a large-area proton exchange membrane fuel cell

Tianwei Miao et al.

Summary: The study investigates the local current density (LCD) and temperature distributions of a PEMFC with different cathode flow fields, and introduces a homogeneity parameter to evaluate the uniformity of LCD distribution. Results show that the cell with dot-parallel flow field performs better in terms of performance and LCD distribution uniformity. Temperature distribution is generally positively correlated with LCD distribution. Increasing cathode stoichiometry can effectively improve LCD distribution uniformity and mitigate local oxygen starvation at high loads.

ENERGY (2022)

Add to Collection

Article Chemistry, Physical

Topology optimization design for the lightweight endplate of proton exchange membrane fuel cell stack clamped with bolts

Daijun Yang et al.

Summary: In this study, a ribbed endplate is proposed as the original model to reduce mass and improve uniformity pressure distribution on gas diffusion layer (GDL). The endplate is then redesigned using the topology optimization method to achieve maximum stiffness, minimum standard deviation of normal displacement of nodes on GDL, and minimum dual objective parameter. The lightweight endplates designed based on optimization results successfully reduce the weight by 14% and the standard deviation of pressure by 16.6% compared to the original model.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Add to Collection

Review Chemistry, Physical

Materials Engineering toward Durable Electrocatalysts for Proton Exchange Membrane Fuel Cells

Lei Zhao et al.

Summary: Proton exchange membrane fuel cells (PEMFCs) have been widely used in commercial markets, especially in the automotive industry. However, the durability of current electrocatalysts, which are crucial for the performance of PEMFCs, remains a significant challenge. Finding strategies to improve the lifespan of electrocatalysts is crucial for practical application in PEMFCs.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Engineering, Environmental

Multifunctional nacre-mimetic Ti3C2Tx films with tunable conductivity and mechanical properties by controlling interlay supramolecular interactions

Zongxu Liu et al.

Summary: This study presents a pioneering strategy to modulate the electrical conductivity and mechanical properties of bioinspired nanocomposite films by controlling interlay supramolecular interactions. By simply varying the content of UPy groups on polyurethane, significant improvements in mechanical properties and electrical conductivity of the nanocomposites were achieved. The research opens up a new avenue for fabricating multifunctional and mechanically robust biomimetic nanocomposites.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Physical

The performance and durability of high-temperature proton exchange membrane fuel cells enhanced by single-layer graphene

Jianuo Chen et al.

Summary: By applying single-layer graphene between the membrane and electrodes, the peak power density and electrochemical active surface area of high-temperature proton exchange membrane fuel cells can be improved. The study also found that single-layer graphene helps control phosphoric acid leaching and reduces hydrogen crossover.

NANO ENERGY (2022)

Add to Collection

Article Thermodynamics

Experimental and numerical Investigation on the design of a bioinspired PEM fuel cell

Christian Suarez et al.

Summary: This article presents an experimental analysis of a novel bioinspired design of the channels of a PEMFC, which shows improved water management capability at high humidity and increased peak power.

ENERGY (2022)

Add to Collection

Article Thermodynamics

Fuel cell application in the automotive industry and future perspective

A. G. Olabi et al.

Summary: The automotive industry is a significant contributor to global emissions due to its high dependency on fossil fuels. This review discusses the current state, technological advances, and future prospects of fuel cells in the automotive industry, while also addressing factors impeding their advancement and potential solutions. The investigation aims to explore pragmatic approaches to reduce the overall cost of fuel cells and integrate them into the automotive industry.

ENERGY (2021)

Add to Collection

Article Thermodynamics

Adaptive and efficient optimization model for optimal parameters of proton exchange membrane fuel cells: A comprehensive analysis

Mohamed Abdel-Basset et al.

Summary: The study introduces an improved chimp optimization algorithm (IChOA) for defining uncertain parameters of proton exchange membrane fuel cells (PEMFC), achieving better modeling accuracy and performance optimization through a ranking-based updating strategy and a balanced exploration and exploitation strategy. The proposed IChOA is compared with 15 nature-inspired metaheuristics algorithms and a gradient-based optimizer, demonstrating superior convergence stability and final accuracy under varied conditions.

ENERGY (2021)

Add to Collection

Editorial Material Thermodynamics

Energy storage systems towards 2050

A. G. Olabi et al.

Summary: The world is experiencing rapid growth in the use of various renewable energy sources, requiring energy storage systems to store and utilize these sources. There are various energy storage technologies available, and the selection depends on factors such as renewable energy sources, location, and infrastructure.

ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Optimal identification of solid oxide fuel cell parameters using a competitive hybrid differential evolution and Jaya algorithm

Guojiang Xiong et al.

Summary: CHDJ is a hybrid metaheuristic optimizer that effectively identifies accurate values for the model parameters of solid oxide fuel cells. It utilizes competitive hybrid operations to explore global space and exploit local regions, generating promising candidate solutions. Experimental results demonstrate that CHDJ achieves good performance under different operating conditions.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection

Article Engineering, Environmental

Microstructure tailoring of solid oxide electrolysis cell air electrode to boost performance and long-term durability

Sangcho Kim et al.

Summary: Microstructure tailoring of solid oxide cell air electrode via a simple method significantly enhances electrochemical performance and stability, addressing bottlenecks in the implementation of high-temperature SOECs.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Thermodynamics

Better electrochemical performance of PEMFC under a novel pneumatic clamping mechanism

Jiaran Liu et al.

Summary: This paper introduces a novel pneumatic clamping mechanism for improving the mechanical stability and electrochemical performance of proton exchange membrane fuel cells (PEMFC). Through finite element analysis and experimental verification, it is demonstrated that PEMFC with the novel clamping mechanism exhibits better contact pressure distribution and electrochemical performance.

ENERGY (2021)

Add to Collection

Article Multidisciplinary Sciences

Centrifugation and index matching yield a strong and transparent bioinspired nacreous composite

Ali Amini et al.

Summary: A nacreous glass composite is proposed in this study, which combines strength, toughness, and transparency. The fabrication method is robust and scalable, making it a potential glass alternative in diverse applications.

SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Quantitative characterization of the energy harvesting performance of soft-contact sphere triboelectric nanogenerator

Dong Guan et al.

Summary: This paper focuses on factors that affect the output performance of SS-TENG and establishes a model to quantitatively describe the output. The optimized fill rate is determined to be 0.83, providing a significant reference for the optimization of blue energy harvesting TENG.

NANO ENERGY (2021)

Add to Collection

Article Thermodynamics

Biomimetic flow fields for proton exchange membrane fuel cells: A review of design trends

A. Iranzo et al.

ENERGY (2020)

Add to Collection

Article Mechanics

General Fishnet Statistics of Strength: Nacreous, Biomimetic, Concrete, Octet-Truss, and Other Architected or Quasibrittle Materials

Wen Luo et al.

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2020)

Add to Collection

Article Energy & Fuels

Investigation of contact pressure distribution on gas diffusion layer of fuel cell with pneumatic endplate

M. M. Barzegari et al.

APPLIED ENERGY (2020)

Add to Collection

Article Robotics

Fluid-Structure Coupling Model and Experimental Validation of Interaction Between Pneumatic Soft Actuator and Lower Limb

Dong Guan et al.

SOFT ROBOTICS (2020)

Add to Collection

Article Thermodynamics

Pontryagin's minimum principle-based real-time energy management strategy for fuel cell hybrid electric vehicle considering both fuel economy and power source durability

Ke Song et al.

ENERGY (2020)

Add to Collection

Review Engineering, Biomedical

Natural arrangement of fiber-like aragonites and its impact on mechanical behavior of mollusk shells: A review

H. M. Ji et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)

Add to Collection

Article Multidisciplinary Sciences

Nacre-mimetic composite with intrinsic self-healing and shape-programming capability

Gaolai Du et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Mechanics

Fishnet Statistical Size Effect on Strength of Materials With Nacreous Microstructure

Wen Luo et al.

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2019)

Add to Collection

Article Engineering, Mechanical

Test and simulation the failure characteristics of twin tube shock absorber

Dong Guan et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Add to Collection

Article Multidisciplinary Sciences

Electrically assisted 3D printing of nacre-inspired structures with self-sensing capability

Yang Yang et al.

SCIENCE ADVANCES (2019)

Add to Collection

Article Multidisciplinary Sciences

Impact-resistant nacre-like transparent materials

Z. Yin et al.

SCIENCE (2019)

Add to Collection

Editorial Material Multidisciplinary Sciences

Bioinspired improvement of laminated glass

Kyriaki Corinna Datsiou

SCIENCE (2019)

Add to Collection

Article Thermodynamics

3D numerical investigation of clamping pressure effect on the performance of proton exchange membrane fuel cell with interdigitated flow field

M. Movahedi et al.

ENERGY (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Hertz theory and Carlson elliptic integrals

J. A. Greenwood

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2018)

Add to Collection

Article Engineering, Mechanical

Normal contact analysis for spherical pump based on fractal theory

Dong Guan et al.

TRIBOLOGY INTERNATIONAL (2018)

Add to Collection

Article Engineering, Mechanical

Tangential contact analysis of spherical pump based on fractal theory

Dong Guan et al.

TRIBOLOGY INTERNATIONAL (2018)

Add to Collection

Article Thermodynamics

Development of contact pressure distribution of PEM fuel cell's MEA using novel clamping mechanism

E. Alizadeh et al.

ENERGY (2017)

Add to Collection

Review Chemistry, Physical

Shock and vibration effects on performance reliability and mechanical integrity of proton exchange membrane fuel cells: A critical review and discussion

Ashkan Haji Hosseinloo et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection

Review Engineering, Biomedical

Mechanical properties of crossed-lamellar structures in biological shells: A review

X. W. Li et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)

Add to Collection

Article Multidisciplinary Sciences

Fishnet model for failure probability tail of nacre-like imbricated lamellar materials

Wen Luo et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2017)

Add to Collection

Article Thermodynamics

Effects of bolt pre-loading variations on performance of GDL in a bolted PEMFC by 3-D FEM analysis

Chi-Hui Chien et al.

ENERGY (2016)

Add to Collection

Article Chemistry, Physical

Investigation of contact pressure distribution over the active area of PEM fuel cell stack

E. Alizadeh et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)

Add to Collection

Article Chemistry, Physical

Simulation and in situ measurement of stress distribution in a polymer electrolyte membrane fuel cell stack

Javier de la Cruz et al.

JOURNAL OF POWER SOURCES (2016)

Add to Collection

Article Multidisciplinary Sciences

Synthetic nacre by predesigned matrix-directed mineralization

Li-Bo Mao et al.

SCIENCE (2016)

Add to Collection

Article Thermodynamics

Effects of clamping force on the water transport and performance of a PEM (proton electrolyte membrane) fuel cell with relative humidity and current density

Dowon Cha et al.

ENERGY (2015)

Add to Collection

Article Thermodynamics

Degradation modeling and operational optimization for improving the lifetime of high-temperature PEM (proton exchange membrane) fuel cells

Jintae Kim et al.

ENERGY (2014)

Add to Collection

Article Chemistry, Physical

Simulation and experimental analysis of the clamping pressure distribution in a PEM fuel cell stack

Alex Bates et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2013)

Add to Collection

Article Chemistry, Physical

Multi-objective topology optimization of end plates of proton exchange membrane fuel cell stacks

P. Lin et al.

JOURNAL OF POWER SOURCES (2011)

Add to Collection

Article Chemistry, Physical

Mechanical behavior of fuel cell membranes under humidity cycles and effect of swelling anisotropy on the fatigue stresses

Ahmet Kusoglu et al.

JOURNAL OF POWER SOURCES (2007)

Add to Collection

Article Materials Science, Multidisciplinary

Deformation mechanisms in nacre

RZ Wang et al.

JOURNAL OF MATERIALS RESEARCH (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.