4.7 Article

Modelling and statistical analysis of plastic biomass mixture co-gasification

Related references

Note: Only part of the references are listed.
Article Environmental Sciences

Contaminant dispersion with axial input sources in soil media under non-linear sorption

Rakesh Kumar Singh et al.

Summary: This study solves the problem of contaminant transport in soil under non-linear sorption using numerical methods. The results are illustrated graphically and compared with an approximate solution, showing the accuracy of the used methods.

ENVIRONMENTAL TECHNOLOGY (2023)

Article Thermodynamics

Steady state modelling of steam-gasification of biomass for H2-rich syngas production

Zhibin Liu et al.

Summary: A multi-stage model for H-2 rich syngas production from biomass gasification was developed in this study. The results showed that under specific conditions, high H-2 content and carbon conversion efficiency can be achieved.

ENERGY (2022)

Article Energy & Fuels

Simulation of biomass-plastic co-gasification in a fluidized bed reactor using Aspen plus

Maninderjit Singh et al.

Summary: A detailed process model for co-gasification of biomass and plastics in a fluidized bed reactor was developed using Aspen Plus software. The effects of process parameters such as plastic content and reactor temperature on the composition and properties of syngas were investigated. The results showed that increasing the plastic content led to higher hydrogen concentrations in the syngas, and increasing the gasification temperature resulted in increased hydrogen content and higher heating value of the syngas.
Review Energy & Fuels

Recent advances in thermodynamic analysis of biomass gasification: A review on numerical modelling and simulation

Mojtaba Ajorloo et al.

Summary: Gasification is considered a flexible recycling method for producing high-quality gas fuels from residues. Implementing mathematical and computer-based models is crucial for advancing research and developments in the gasification field.

JOURNAL OF THE ENERGY INSTITUTE (2022)

Article Environmental Sciences

Air-steam gasification of biomass based on a multi-composition multi-step kinetic model: A clean strategy for hydrogen-enriched syngas production

Yan Cao et al.

Summary: Biomass was studied as a potential renewable energy source, and a model was developed to predict gasification characteristics and performances. The study found that gasification temperature significantly influenced gas composition and product yields, while equivalence ratio and steam/biomass ratio affected gasification characteristics.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Article Agricultural Engineering

A generic input-output approach in developing and optimizing an Aspen plus steam-gasification model for biomass

Sk Arafat Zaman et al.

Summary: This article presents an equilibrium steam-gasification model developed in Aspen Plus, optimizing the steam-gasification process using response surface methodology for a wide variety of biomass feeds. The analysis shows that almost 100% desirability is achieved at the optimum operating conditions.

BIORESOURCE TECHNOLOGY (2021)

Article Thermodynamics

A multi-stage co-gasification system of biomass and municipal solid waste (MSW) for high quality syngas production

Yisheng Hu et al.

Summary: The study simulated air and air-steam co-gasification of switchgrass and municipal solid waste using Aspen Plus software, analyzing the effects of co-gasification and steam/feed ratios on gas composition and gasification performance. Results showed higher gasification efficiency and product yield under specific conditions, but some parameters exhibited a decrease in performance with increasing CGR and S/F ratios.

ENERGY (2021)

Article Thermodynamics

Polyethylene waste gasification syngas analysis and multi-objective optimization using central composite design for simultaneous minimization of required heat and maximization of exergy efficiency

Rezgar Hasanzadeh et al.

Summary: This study focused on modeling and optimizing the gasification of polyethylene waste, showing that increasing temperature and steam to polyethylene waste ratio significantly improve hydrogen production and exergy efficiency. The regression models derived from central composite design demonstrated high accuracy in estimating heat required and exergy efficiency.

ENERGY CONVERSION AND MANAGEMENT (2021)

Article Energy & Fuels

Co-gasification of high-density polyethylene and pretreated pine wood

Jinhu Li et al.

Summary: The presence of AAEMs in biomass increases char yield and reactivity, enhancing syngas yield and energy output. Synergistic effects are found in the co-gasification of biomass and HDPE plastic, leading to relatively stable energy output.

APPLIED ENERGY (2021)

Article Chemistry, Applied

Prediction and optimization of syngas production from a kinetic-based biomass gasification process model

Qi Dang et al.

Summary: This work presents a robust method for predicting and optimizing syngas production through the development of a kinetic-based biomass gasification process model. Sensitivity and multivariable analyses were conducted to determine key parameters affecting syngas yield, leading to the establishment of a surrogate model for predicting optimal syngas yields under different operating conditions. The global optimization model demonstrated a maximum syngas yield of 78.6 vol% under specific temperature, ER, S/B ratio, and MC conditions.

FUEL PROCESSING TECHNOLOGY (2021)

Article Thermodynamics

Simulation of biomass gasification in bubbling fluidized bed reactor using aspen plus®

M. Puig-Gamero et al.

Summary: The direct gasification process of biomass in a bubbling fluidized bed reactor was simulated and validated using different models for pyrolysis, combustion, and reduction. The simulation results showed good agreement with experimental results, particularly for gases such as CO, CO2, H-2, CH4, and C2H4. However, the accuracy of H-2 gas prediction was found to be the lowest among the gases analyzed.

ENERGY CONVERSION AND MANAGEMENT (2021)

Article Chemistry, Physical

Hydrogen-rich syngas production via integrated configuration of pyrolysis and air gasification processes of various algal biomass: Process simulation and evaluation using Aspen Plus software

Mahdi Faraji et al.

Summary: The present study investigates hydrogen-rich syngas production via an integrated configuration of pyrolysis and air gasification processes of different algal biomass at relevant industrial conditions. A comprehensive steady state equilibrium simulation model developed using Aspen Plus software was used to optimize gasifier performance, with good agreement between predicted and experimental results. Sensitivity analysis of operational parameters identified optimal conditions for maximizing hydrogen and carbon monoxide production.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Chemistry, Physical

Modeling and multi-objective optimization of variable air gasification performance parameters using Syzygium cumini biomass by integrating ASPEN Plus with Response surface methodology (RSM)

Deepak Kumar Singh et al.

Summary: This study developed a robust method for modeling and optimizing variable air gasification parameters using ASPEN Plus simulator and Response Surface Methodology (RSM). A comprehensive thermochemical equilibrium-based model of downdraft gasifier was developed by minimizing Gibbs free energy, and good agreement was attained between simulated and experimental results. The air gasification process was modeled in four phases, including biomass drying, decomposition, gasification, and gas filtration, with sensitivity analysis performed to obtain syngas composition and optimize gasification performance.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Review Chemistry, Physical

Modeling and process optimization of hydrothermal gasification for hydrogen production: A comprehensive review

Jude A. Okolie et al.

Summary: This study outlines different modeling and optimization strategies for hydrothermal gasification of biomass and waste materials to produce hydrogen-rich syngas, discussing various modeling techniques and process optimization approaches comprehensively. Knowledge gaps and prospects of modeling and optimization of hydrothermal conversion are also elucidated.

JOURNAL OF SUPERCRITICAL FLUIDS (2021)

Proceedings Paper Materials Science, Multidisciplinary

Response surface methodology: A review on its applications and challenges in microbial cultures

Sura Jasem Mohammed Breig et al.

Summary: Response surface methodology is effectively used in optimizing microbial products, combining statistical and mathematical techniques to assess the effects of independent variables. Recent research has shown the usefulness of RSM in fermentation processes for optimizing microbial activities and products, while also highlighting challenges and hypothetical concepts.

MATERIALS TODAY-PROCEEDINGS (2021)

Article Engineering, Chemical

Model development and thermodynamic analysis of biomass co-gasification using Aspen plus®

Soumitra Pati et al.

Summary: The study suggests that co-gasifying biomass can reduce CO2 emission and potentially achieve optimal gasification performance when dealing with Indian lignocellulosic biomass. Evaluating energy and exergy efficiencies can assist in selecting suitable Indian biomass for co-gasification.

INDIAN CHEMICAL ENGINEER (2021)

Review Green & Sustainable Science & Technology

A review on municipal solid waste-to-energy trends in the USA

C. Mukherjee et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)

Article Engineering, Environmental

Experimental and thermodynamic study of banana peel non-catalytic gasification characteristics

Jiang He et al.

WASTE MANAGEMENT (2020)

Review Environmental Sciences

Co-pyrogasification of Plastics and Biomass, a Review

C. Block et al.

WASTE AND BIOMASS VALORIZATION (2019)

Review Green & Sustainable Science & Technology

Effect of various blended fuels on syngas quality and performance in catalytic co-gasification: A review

Muddasser Inayat et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)

Review Green & Sustainable Science & Technology

A review of biomass gasification modelling

Sahar Safarian et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)

Article Thermodynamics

Oxygen-enriched air gasification of biomass materials for high-quality syngas production

Y. Cao et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

Article Green & Sustainable Science & Technology

Detailed modelling of biomass steam gasification in a dual fluidized bed gasifier with temperature variation

Arash Aghaalikhani et al.

RENEWABLE ENERGY (2019)

Review Green & Sustainable Science & Technology

Co-gasification and recent developments on waste-to-energy conversion: A review

Ana Ramos et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Article Thermodynamics

Simulation of the gasification of animal wastes in a dual gasifier using Aspen Plus®

M. Fernandez-Lopez et al.

ENERGY CONVERSION AND MANAGEMENT (2017)

Article Chemistry, Physical

Enhancement of hydrogen production in a modified moving bed downdraft gasifier - A thermodynamic study by including tar

Muflih A. Adnan et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Review Green & Sustainable Science & Technology

Modelling approaches to biomass gasification: A review with emphasis on the stoichiometric method

M. La Villetta et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Article Green & Sustainable Science & Technology

Steam gasification of biomass with subsequent syngas adjustment using shift reaction for syngas production: An Aspen Plus model

Laxmi Prasad Rao Pala et al.

RENEWABLE ENERGY (2017)

Article Green & Sustainable Science & Technology

Parametric study of co-gasification of ternary blends of rice straw, polyethylene and polyvinylchloride

Humair Ahmed Baloch et al.

CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY (2016)

Review Green & Sustainable Science & Technology

Assessing the gasification performance of biomass: A review on biomass gasification process conditions, optimization and economic evaluation

Anis Atikah Ahmad et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Article Thermodynamics

Process simulation of biomass gasification in a bubbling fluidized bed reactor

S. M. Beheshti et al.

ENERGY CONVERSION AND MANAGEMENT (2015)

Review Green & Sustainable Science & Technology

Biomass gasification models for downdraft gasifier: A state-of-the-art review

Tapas Kumar Patra et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)

Article Engineering, Environmental

Kinetic model for reactions of indole under supercritical water gasification conditions

Yang Guo et al.

CHEMICAL ENGINEERING JOURNAL (2014)

Review Green & Sustainable Science & Technology

Modeling of biomass gasification: A review

Dipal Baruah et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)

Article Engineering, Chemical

Simulation of Syngas Production from Municipal Solid Waste Gasification in a Bubbling Fluidized Bed Using Aspen Plus

Miaomiao Niu et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2013)

Article Energy & Fuels

Characteristics of syngas from co-gasification of polyethylene and woodchips

I. I. Ahmed et al.

APPLIED ENERGY (2011)

Review Thermodynamics

Characterization and prediction of biomass pyrolysis products

Daniel Neves et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2011)