4.7 Article

Modelling and analysis on effects of penetration of microporous layer into gas diffusion layer in PEM fuel cells: Focusing on mass transport

Related references

Note: Only part of the references are listed.
Article Thermodynamics

Numerical investigations of assisted heating cold start strategies for proton exchange membrane fuel cell systems

Zirong Yang et al.

Summary: The research found that under low temperature conditions, different assisted strategies can achieve successful startup of fuel cell systems, but there are also some issues, such as the additional heat may lead to accelerated damage to the stack, the thermal conductivity of fuel cell materials need to be improved, and the power consumption for heating coolant is high.

ENERGY (2021)

Article Thermodynamics

Fuel cell application in the automotive industry and future perspective

A. G. Olabi et al.

Summary: The automotive industry is a significant contributor to global emissions due to its high dependency on fossil fuels. This review discusses the current state, technological advances, and future prospects of fuel cells in the automotive industry, while also addressing factors impeding their advancement and potential solutions. The investigation aims to explore pragmatic approaches to reduce the overall cost of fuel cells and integrate them into the automotive industry.

ENERGY (2021)

Article Thermodynamics

Impact of gas diffusion layer spatial variation properties on water management and performance of PEM fuel cells

Xiao Ma et al.

Summary: The study reveals that spatial variation in porosity and wettability distribution in gas diffusion layer can affect liquid water saturation profile, fuel cell performance, and membrane water content. Higher operating pressure improves performance, while increased anode inlet humidity results in higher membrane water content. The wettability distribution also plays a role in water management and performance of fuel cells, though its influence is more indirect than porosity.

ENERGY CONVERSION AND MANAGEMENT (2021)

Article Thermodynamics

Modeling diffusion and convection in thin porous transport layers using a composite continuum-network model: Application to gas diffusion layers in polymer electrolyte fuel cells

P. A. Garcia-Salaberri

Summary: The composite continuum-network formulation presented in this work provides an alternative approach for the analysis of porous materials, combining the ease of implementation of macroscopic continuum modeling and the computational power of pore network modeling. The results show significant variations in the spatial distributions of local properties due to microstructural heterogeneities, which greatly affect both bulk and interfacial fluxes in thin gas diffusion layers.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Article Chemistry, Physical

Effects of ratio variation in substrate and micro porous layer penetration on polymer exchange membrane fuel cell performance

Jaebong Sim et al.

Summary: This study investigated the effects of ratio variation in the substrate and MPL penetration region on PEMFC performance, finding the optimal ratios for MPL penetration and overall performance. An excessively low substrate ratio can lead to water flooding and hinder gas supply.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Multidisciplinary Sciences

Designing the next generation of proton-exchange membrane fuel cells

Kui Jiao et al.

Summary: The rapid growth of proton-exchange membrane fuel cell technology is driving the demand for clean and sustainable global energy applications. Increasing PEMFC power density is critical for commercialization, with ambitious goals set globally. Future high-power-density PEMFCs will focus on improving membrane electrode assembly components, water and thermal management, and materials.

NATURE (2021)

Article Computer Science, Artificial Intelligence

Boosting the optimization of membrane electrode assembly in proton exchange membrane fuel cells guided by explainable artificial intelligence

Rui Ding et al.

Summary: The study introduced an AI tool for optimizing the membrane electrode assembly of proton exchange membrane fuel cells, which improved replaceability and reduced computational costs, and identified a tradeoff in catalyst layer thickness through intelligent simulation methods.

ENERGY AND AI (2021)

Article Thermodynamics

Partial flooding and its effect on the performance of a proton exchange membrane fuel cell

Jun Shen et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

Article Chemistry, Physical

Effects of agglomerate model parameters on transport characterization and performance of PEM fuel cells

Shian Li et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Article Green & Sustainable Science & Technology

Investigation of the effect of micro-porous layer on PEM fuel cell cold start operation

Xu Xie et al.

RENEWABLE ENERGY (2018)

Article Green & Sustainable Science & Technology

A graphene-based microporous layer for proton exchange membrane fuel cells: Characterization and performance comparison

Adnan Ozden et al.

RENEWABLE ENERGY (2018)

Article Energy & Fuels

Multi-phase simulation of proton exchange membrane fuel cell with 3D fine mesh flow field

Guobin Zhang et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2018)

Article Thermodynamics

Evaluation and modeling of PEM fuel cells with the Bruggeman correlation under various tortuosity factors

Yulin Wang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Article Chemistry, Physical

Laser-perforated gas diffusion layer for promoting liquid water transport in a proton exchange membrane fuel cell

Xueke Wang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Article Electrochemistry

Impact of Microporous Layer Pore Properties on Liquid Water Transport in PEM Fuel Cells: Carbon Black Type and Perforation

Christoph Simon et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Article Electrochemistry

Multiwall Carbon Nanotube-Based Microporous Layers for Polymer Electrolyte Membrane Fuel Cells

J. Lee et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Article Chemistry, Physical

Optimum design of polymer electrolyte membrane fuel cell with graded porosity gas diffusion layer

Y. Zhang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)

Article Thermodynamics

A unit-cell approach for determining the effective thermal conductivity of the polymer electrolyte membrane fuel cell microporous layer

Steven J. Botelho et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)

Article Electrochemistry

Impact of Interfacial Water Transport in PEMFCs on Cell Performance

Toshikazu Kotaka et al.

ELECTROCHIMICA ACTA (2014)

Article Green & Sustainable Science & Technology

Development of a porosity-graded micro porous layer using thermal expandable graphite for proton exchange membrane fuel cells

Jeong Hwan Chun et al.

RENEWABLE ENERGY (2013)

Article Electrochemistry

Soft X-ray visualization of the liquid water transport within the cracks of micro porous layer in PEMFC

Takashi Sasabe et al.

ELECTROCHEMISTRY COMMUNICATIONS (2011)

Article Chemistry, Physical

Performance and liquid water distribution in PEFCs with different anisotropic fiber directions of the GDL

Kyaw Swar Soe Naing et al.

JOURNAL OF POWER SOURCES (2011)

Article Electrochemistry

Consideration of the Role of Micro-Porous Layer on Liquid Water Distribution in Polymer Electrolyte Fuel Cells

Joshua S. Preston et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2011)

Article Electrochemistry

Heterogeneous Through-Plane Porosity Distributions for Treated PEMFC GDLs. II. Effect of MPL Cracks

Z. Fishman et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2011)

Article Electrochemistry

Two-phase transport and the role of micro-porous layer in polymer electrolyte fuel cells

U Pasaogullari et al.

ELECTROCHIMICA ACTA (2004)