Related references
Note: Only part of the references are listed.Spray characteristics of biodiesel-polyoxymethylene dimethyl ethers (PODE) blends in a constant volume chamber
Yu Liu et al.
COMBUSTION SCIENCE AND TECHNOLOGY (2023)
Spray Analysis of Biodiesels Derived from Various Biomass Resources in a Constant Volume Spray Chamber
Anilcan Ulu et al.
ACS OMEGA (2022)
Spray and engine performance of cerium oxide nanopowder and carbon nanotubes modified alternative fuel
Zhichao Zhang et al.
FUEL (2022)
Effect of alcoholic and nano-particles additives on tribological properties of diesel-palm-sesame-biodiesel blends
M. A. Mujtaba et al.
ENERGY REPORTS (2021)
Combustion and emission characteristics of spark and compression ignition engine fueled with 2,5-dimethylfuran (DMF): A comprehensive review
Anh Tuan Hoang et al.
FUEL (2021)
Nanomaterials as fuel additives in diesel engines: A review of current state, opportunities, and challenges
Tina Kegl et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2021)
Evaporating spray characteristics of methanol-in-diesel emulsions
Anupam Ghosh et al.
FUEL (2021)
Experimental study on spray characteristics, combustion stability, and emission performance of a CRDI diesel engine operated with biodiesel-ethanol blends
Limin Geng et al.
ENERGY REPORTS (2021)
Effects of autooxidation on the fuel spray characteristics of Karanja biodiesel
C. K. Suraj et al.
BIOMASS & BIOENERGY (2021)
Experimental Research on the Macroscopic and Microscopic Spray Characteristics of Diesel-PODE3-4 Blends
Yulin Chen et al.
ENERGIES (2021)
Experimental study of spray analysis for Palmarosa biodiesel-diesel blends in a constant volume chamber
Ramalingam Sathiyamoorthi et al.
ENVIRONMENTAL PROGRESS & SUSTAINABLE ENERGY (2021)
Experimental study on spray characteristics of octanol biodiesel and modification of spray tip penetration model
Junjian Tian et al.
PHYSICS OF FLUIDS (2021)
Assessing fuel properties effects of 2,5-dimethylfuran on microscopic and macroscopic characteristics of oxygenated fuel/diesel blends spray
Peng Zhang et al.
SCIENTIFIC REPORTS (2020)
Overview of polyoxymethylene dimethyl ether additive as an eco-friendly fuel for an internal combustion engine: Current application and environmental impacts
Omar Awad et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2020)
Experimental Study of the Effect of Hydrotreated Vegetable Oil and Oxymethylene Ethers on Main Spray and Combustion Characteristics under Engine Combustion Network Spray A Conditions
Jose V. Pastor et al.
APPLIED SCIENCES-BASEL (2020)
Investigation of spray characteristics from waste cooking oil, bio-hydro fined diesel oil (BHD)and n-tridecane in a constant volume chamber
Annisa Bhikuning et al.
CASE STUDIES IN THERMAL ENGINEERING (2020)
Comparative Assessment of Spray Behavior, Combustion and Engine Performance of ABE-Biodiesel/Diesel as Fuel in DI Diesel Engine
Sattar Jabbar Murad Algayyim et al.
ENERGIES (2020)
Effect of spray characteristics influences combustion in DI diesel engine - A review
S. Gopinath et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Experiments on macroscopic spray characteristics of diesel-ethanol with dispersed cerium nanoparticles
Lin Bao et al.
JOURNAL OF THE ENERGY INSTITUTE (2020)
Spray combustion and soot formation characteristics of the acetone-butanol-ethanol/diesel blends under diesel engine-relevant conditions
Zhengxin Xu et al.
FUEL (2020)
Effects of nanoscale fuel additives on properties and non-reacting spray performance of alternative, conventional and blended jet fuels at elevated ambient conditions
Kumaran Kannaiyan et al.
FUEL PROCESSING TECHNOLOGY (2020)
Butanol-acetone mixture blended with cottonseed biodiesel: Spray characteristics evolution, combustion characteristics, engine performance and emission
Sattar Jabbar Murad Algayyim et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2019)
Spray characteristics of gasoline/PODE and diesel/PODE blends in a constant volume chamber
Jialin Liu et al.
APPLIED THERMAL ENGINEERING (2019)
Experimental study of the spray, combustion, and emission performance of a diesel engine with high n-pentanol blending ratios
Mingzhang Pan et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Simultaneous study on spray liquid length, ignition and combustion characteristics of diesel and hydrogenated catalytic biodiesel in a constant volume combustion chamber
Tamilselvan Pachiannan et al.
RENEWABLE ENERGY (2019)
Investigation of the effects of preheating temperature of biodiesel-diesel fuel blends on spray characteristics and injection pump performances
Samsudin Anis et al.
RENEWABLE ENERGY (2019)
Experiment and analysis of spray characteristics of biodiesel blending with di-n-butyl ether in a direct injection combustion chamber
Wei Fu et al.
ENERGY (2019)
Experimental study on effects of ethanol-diesel fuel blended on spray characteristics under ultra-high injection pressure up to 350 MPa
Yusong Yu
ENERGY (2019)
Effects of isopropanol-butanol-ethanol and diesel fuel blends on combustion characteristics in a constant volume chamber
Timothy H. Lee et al.
FUEL (2019)
Experimental study on spray and emission characteristics of a diesel engine fueled with preheated bio-oils and diesel fuel
Anh Tuan Hoang
ENERGY (2019)
Assessment of n-pentanol additive and EGR rates effects on spray characteristics, energy distribution and engine performance
Haozhong Huang et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Experimental Investigation of Effects of Di-N-Butyl Ether Addition on Spray Macroscopic Characteristics of Diesel-Biodiesel Blends
Yanju Liu et al.
JOURNAL OF ENERGY ENGINEERING (2019)
Experimental study on spray characteristics of long-chain alcohol-diesel fuels in a constant volume chamber
Fengyu Li et al.
JOURNAL OF THE ENERGY INSTITUTE (2019)
The Impact of Injector Hole Diameter on Spray Behaviour for Butanol-Diesel Blends
Sattar Jabbar Murad Algayyim et al.
ENERGIES (2018)
A review on the engine performance and exhaust emission characteristics of diesel engines fueled with biodiesel blends
Natalina Damanik et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2018)
Properties and effects of organic additives on performance and emission characteristics of diesel engine: a comprehensive review
Chandan Kumar et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2018)
Comparison of macroscopic spray characteristics between biodiesel-pentanol blends and diesel
Fengyu Li et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2018)
Spray and combustion characterizations of ABE/Dodecane blend in comparison to alcohol/Dodecane blends at high-pressure and high-temperature conditions
O. Nilaphai et al.
FUEL (2018)
Experimental investigation on effect of ethanol and di-ethyl ether addition on the spray characteristics of diesel/biodiesel blends under high injection pressure
Cheng Zhan et al.
FUEL (2018)
Study on viscosity and surface tension properties of biodiesel-diesel blends and their effects on spray parameters for CI engines
Mithun Das et al.
FUEL (2018)
Production and application of ABE as a biofuel
Sattar Jabbar Murad Algayyim et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
A comprehensive review of low cost biodiesel production from waste chicken fat
M. Kirubakaran et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
Review on nanoparticles and nanostructured materials: history, sources, toxicity and regulations
Jaison Jeevanandam et al.
BEILSTEIN JOURNAL OF NANOTECHNOLOGY (2018)
Experimental and numerical investigations on spray characteristics of fatty acid methyl esters
R. D. Lanjekar et al.
ROYAL SOCIETY OPEN SCIENCE (2018)
Performance and emissions of diesel-biodiesel-ethanol blends in a light duty compression ignition engine
Sam Shamun et al.
APPLIED THERMAL ENGINEERING (2018)
Macroscopic and Microscopic Spray Characteristics of Diesel and Gasoline in a Constant Volume Chamber
Moo-Yeon Lee et al.
ENERGIES (2018)
The effect of nano-additives in diesel-biodiesel fuel blends: A comprehensive review on stability, engine performance and emission characteristics
Manzoore Elahi M. Soudagar et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
The impact of n-butanol and iso-butanol as components of butanol-acetone (BA) mixture-diesel blend on spray, combustion characteristics, engine performance and emission in direct injection diesel engine
Sattar Jabbar Murad Algayyim et al.
ENERGY (2017)
The effects of alumina nanoparticles as fuel additives on the spray characteristics of gas-to-liquid jet fuels
Kumaran Kannaiyan et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2017)
Combustion and emission characteristics of a direct injection diesel engine fueled with biodiesel and PODE/biodiesel fuel blends
Haoye Liu et al.
FUEL (2017)
Macroscopic and microscopic spray characteristics of fatty acid esters on a common rail injection system
Dong Han et al.
FUEL (2017)
Effects of fuel injection parameters on emission characteristics of diesel engines operating on various biodiesel: A review
P. Mohamed Shameer et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Macroscopic spray characteristics of next-generation bio-derived diesel fuels in comparison to mineral diesel
Thomas Bohl et al.
APPLIED ENERGY (2017)
Impact of nanoparticles and butanol on properties and spray characteristics of waste cooking oil biodiesel and pure rapeseed oil
K. H. Ahmad et al.
WORLD RENEWABLE ENERGY CONGRESS-17 (WREC) (2017)
Microbial production of propanol
Thomas Walther et al.
BIOTECHNOLOGY ADVANCES (2016)
Di-n-buthylether, n-octanol, and n-octane as fuel candidates for diesel engine combustion
Bruno Kerschgens et al.
COMBUSTION AND FLAME (2016)
Spray and evaporation characteristics of n-pentanol-diesel blends in a constant volume chamber
Yinjie Ma et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Higher alcohol-biodiesel-diesel blends: An approach for improving the performance, emission, and combustion of a light-duty diesel engine
H. K. Imdadul et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Experimental investigation on the effect of n-butanol blending on spray characteristics of soybean biodiesel in a common-rail fuel injection system
Jun Mo et al.
FUEL (2016)
Experimental study on primary breakup of diesel spray under cold start conditions
Ziman Wang et al.
FUEL (2016)
Experimental study on microscopic and macroscopic characteristics of diesel spray with split injection
Ziman Wang et al.
FUEL (2016)
Effect of polyoxymethylene dimethyl ethers addition on spray and atomization characteristics using a common rail diesel injection system
Donghua Li et al.
FUEL (2016)
Experimental study on spray, combustion and emission characteristics of pine oil/diesel blends in a multi-cylinder diesel engine
Haozhong Huang et al.
FUEL PROCESSING TECHNOLOGY (2016)
Butanol and hexanol production in Clostridium carboxidivorans syngas fermentation: Medium development and culture techniques
John R. Phillips et al.
BIORESOURCE TECHNOLOGY (2015)
Combustion of nano aluminum particles (Review)
D. S. Sundaram et al.
COMBUSTION EXPLOSION AND SHOCK WAVES (2015)
An Experimental Study on the Macroscopic Spray Characteristics of Biodiesel and Diesel in a Constant Volume Chamber
Hongzhan Xie et al.
ENERGIES (2015)
Effect of di-n-butyl ether blending with soybean-biodiesel on spray and atomization characteristics in a common-rail fuel injection system
Li Guan et al.
FUEL (2015)
Evaporation characteristics of acetone-butanol-ethanol and diesel blends droplets at high ambient temperatures
Xiaokang Ma et al.
FUEL (2015)
Characterization of green zero-valent iron nanoparticles produced with tree leaf extracts
S. Machado et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2015)
Spray and atomization characteristics of isobutene blended DME fuels
Woong Il Kim et al.
JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2015)
Experimental Study of the Spray Characteristics of Diesohol Fuel using a High-Pressure Common-Rail Injection System in a Diesel Engine
L. B. Song et al.
ENERGY TECHNOLOGY (2015)
Spray measurement technology: a review
Todd D. Fansler et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2015)
Effect of fuel injection pressure and injection timing on spray characteristics and particulate size-number distribution in a biodiesel fuelled common rail direct injection diesel engine
Avinash Kumar Agarwal et al.
APPLIED ENERGY (2014)
Spray and Combustion Characteristics of Neat Acetone-Butanol-Ethanol, n-Butanol, and Diesel in a Constant Volume Chamber
Han Wu et al.
ENERGY & FUELS (2014)
Applicability of dimethyl ether (DME) in a compression ignition engine as an alternative fuel
Su Han Park et al.
ENERGY CONVERSION AND MANAGEMENT (2014)
Experimental study of spray characteristics of biodiesel derived from waste cooking oil
Balaji Mohan et al.
ENERGY CONVERSION AND MANAGEMENT (2014)
Experimental study of the spray characteristics of USLD, methanol and DME on the swirl nozzle of a Stirling engine
Wugao Zhang et al.
FUEL PROCESSING TECHNOLOGY (2014)
An investigation of the spray characteristics of diesel-DME blended fuel with variation of ambient pressure in a constant volume combustion chamber
Jiwoong Yang et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2014)
Spray and atomization of diesel fuel and its alternatives from a single-hole injector using a common rail fuel injection system
Pin-Chia Chen et al.
FUEL (2013)
Comparison of theoretical and experimental diesel and DME injection spray characteristics
D. Cipolat et al.
FUEL PROCESSING TECHNOLOGY (2013)
The effect of the addition of individual methyl esters on the combustion and emissions of ethanol and butanol -diesel blends
E. Sukjit et al.
ENERGY (2012)
Spray characteristics of biodiesel/blends in a high pressure constant volume spray chamber
Avinash Kumar Agarwal et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2012)
Experimental and numerical study on suitable diesel fuel surrogates in low temperature combustion conditions
Jing Luo et al.
FUEL (2012)
Studies on the effect of antioxidants on the long-term storage and oxidation stability of Pongamia pinnata (L.) Pierre biodiesel
Asir Obadiah et al.
FUEL PROCESSING TECHNOLOGY (2012)
The effect of injection pressure and fuel viscosity on the spray characteristics of biodiesel blends injected into an atmospheric chamber
Ainul Ghurri et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2012)
An economic and ecological perspective of ethanol production from renewable agro waste: a review
Latika Bhatia et al.
AMB EXPRESS (2012)
Long term storage stability of Jatropha curcas biodiesel
Siddharth Jain et al.
ENERGY (2011)
Spray and combustion characterization for internal combustion engines using optical measuring techniques - A review
S. N. Soid et al.
ENERGY (2011)
Storage stability and ageing effect of biodiesel blends treated with different antioxidants
Georgios Karavalakis et al.
ENERGY (2011)
Comparison of Ethanol and Butanol as Additives in Soybean Biodiesel Using a Constant Volume Combustion Chamber
Haifeng Liu et al.
ENERGY & FUELS (2011)
Investigation on the fuel spray and emission reduction characteristics for dimethyl ether (DME) fueled multi-cylinder diesel engine with common-rail injection system
In Mo Youn et al.
FUEL PROCESSING TECHNOLOGY (2011)
Thermodynamic, performance and emission investigation of a diesel engine running on dimethyl ether and diethyl ether
Ismet Sezer
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2011)
Biodiesel feasibility study: An evaluation of material compatibility; performance; emission and engine durability
M. A. Fazal et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2011)
Spray characteristics of emulsified castor biodiesel on engine emissions and deposit formation
Yung-Sung Lin et al.
RENEWABLE ENERGY (2011)
Optical Diagnostics of the Pollutant Formation in a CI Engine Operating with Diesel Fuel Blends
Simona Silvia Merola et al.
SAE INTERNATIONAL JOURNAL OF ENGINES (2011)
Fuel injection characteristics and spray behavior of DME blended with methyl ester derived from soybean oil
Seung Hwan Bang et al.
FUEL (2010)
A study on the macroscopic spray behavior and atomization characteristics of biodiesel and dimethyl ether sprays under increased ambient pressure
Hyung Jun Kim et al.
FUEL PROCESSING TECHNOLOGY (2010)
Experimental and analytical study on biodiesel and diesel spray characteristics under ultra-high injection pressure
Xiangang Wang et al.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2010)
Study on the spray characteristics of methyl esters from waste cooking oil at elevated temperature
Yung-Sung Lin et al.
RENEWABLE ENERGY (2010)
Spray Characteristics Study of DMF Using Phase Doppler Particle Analyzer
Guohong Tian et al.
SAE INTERNATIONAL JOURNAL OF PASSENGER CARS-MECHANICAL SYSTEMS (2010)
Experimental study of the spray characteristics of biodiesel based on inedible oil
Yuan Gao et al.
BIOTECHNOLOGY ADVANCES (2009)
Experimental Study of Biodiesel Blends' Effects on Diesel Injection Processes
Jose M. Desantes et al.
ENERGY & FUELS (2009)
An experimental and numerical study on sprays injected from two-hole nozzles for DISI engines
Keiya Nishida et al.
FUEL (2009)
Biodiesel combustion in an optical HSDI diesel engine under low load premixed combustion conditions
Tiegang Fang et al.
FUEL (2009)
Bio-diesel effects on combustion processes in an HSDI diesel engine using advanced injection strategies
Tiegang Fang et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2009)
Liquid penetration length in direct diesel fuel injection
S. Martinez-Martinez et al.
APPLIED THERMAL ENGINEERING (2008)
Experimental and analytical study on the spray characteristics of dimethyl ether (DME) and diesel fuels within a common-rail injection system in a diesel engine
Hyun Kyu Suh et al.
FUEL (2008)
Study on the application of DME/diesel blends in a diesel engine
Wang Ying et al.
FUEL PROCESSING TECHNOLOGY (2008)
Synthesis of magnesium hydroxide and oxide nanoparticles using a spinning disk reactor
Clifford Y. Tai et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2007)
Experimental investigation of spray and combustion characteristics of dimethyl ether in a common-rail diesel engine
Myung Yoon Kim et al.
ENERGY & FUELS (2007)
A digital image analysis technique for quantitative characterisation of high-speed sprays
Julian T. Kashdan et al.
OPTICS AND LASERS IN ENGINEERING (2007)
Heat transfer in Nanofluids - A review
Sarit Kumar Das et al.
HEAT TRANSFER ENGINEERING (2006)
Atomization characteristics of dimethyl ether fuel as an alternative fuel injected through a common-rail injection system
Hyun Kyu Suh et al.
ENERGY & FUELS (2006)
Effect of ethers and ether/ethanol additives on the physicochemical properties of diesel fuel and on engine tests
EW de Menezes et al.
FUEL (2006)
Optical diagnostics of diesel spray injections and combustion in a high-pressure high-temperature cell
B Bougie et al.
APPLIED PHYSICS B-LASERS AND OPTICS (2005)
Co-oxidation in the auto-ignition of primary reference fuels and n-heptane/toluene blends
J Andrae et al.
COMBUSTION AND FLAME (2005)
Ethanol-diesel fuel blends - a review
AC Hansen et al.
BIORESOURCE TECHNOLOGY (2005)
DFT studies of the hydrogen abstraction from primary alcohols by O2 in relation with cetane number data
H Abou-Rachid et al.
JOURNAL OF MOLECULAR STRUCTURE-THEOCHEM (2003)
Dimethyl ether (DME) spray characteristics in a common-rail fuel injection system
J Yu et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2003)
Biodiesel development and characterization for use as a fuel in compression ignition engines
AK Agarwal et al.
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2001)