☆ 4.7 Article

Ablation behaviour and mechanism of Mg-modified ZrC-SiC composite in plasma ablation flame

CORROSION SCIENCE (2022)

Related references

Note: Only part of the references are listed.

Article Materials Science, Ceramics

Effect of MgCl2 addition on the preparation of ZrC-SiC composite particles by sol-gel

Lei Zheng et al.

Summary: The study focused on synthesizing high purity ZrC-SiC powders by combining a sol-gel process with carbothermal reduction and adding MgCl2 at a lower temperature. By optimizing fabrication conditions and synthesis temperature, the formation of ZrC-SiC powders was accelerated at lower temperatures, achieving stoichiometric carbon content.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Micro/nano multiscale reinforcing strategies toward extreme high-temperature applications: Take carbon/carbon composites and their coatings as the examples

Qiangang Fu et al.

Summary: Carbon fiber reinforced carbon composites (C/Cs) are promising high-temperature materials, but they are prone to destructive oxidation at elevated temperatures. Matrix modification and coating technologies are not sufficient due to brittleness of ceramics and other inherent issues. Micro/nano multiscale reinforcing strategies have been developed in the past two decades to fabricate C/Cs with high strength and excellent high-temperature stability.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Ceramics

Improving the sinterability of ZrC-SiC composite powders by Mg addition

Lei Zheng et al.

Summary: In this study, core-shell-structured hybrid ZrC-SiC composite nanoparticles were successfully synthesized by adding Mg, which enhanced the sinterability of the ZrC-SiC nanoparticles. The addition of MgCl2 not only strengthened the network structure of ZrC-SiC gel, but also led to the formation of an amorphous Mg-Si-O oxide coating on the nanoparticle surfaces, enhancing the sinterability of the ZrC-SiC nanoparticles.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of LaB6 on composition, microstructure and ablation property of the HfC-TaC-SiC doped C/C composites prepared by precursor infiltration and pyrolysis

Cunqian Fang et al.

Summary: By introducing HfC, TaC, and SiC into the Cf/LaB6 preform, four kinds of high-performance UHTC doped C/C composites were fabricated, showing excellent ablation resistance and stability. The composite doped with LaB6-HfC-TaC-SiC exhibited the best performance, with good coordination among the oxides, leading to suppressed further ablation and confirmed stability of the multi-phase layer.

CORROSION SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of PyC shell thickness on the microstructure, ablation resistance of SiCnws/PyC-C/C-ZrC-SiC composites

Qinchuan He et al.

Summary: By increasing the PyC shell thickness in SiC nanowires/pyrocarbon core-shell structured composites, the density and thermal conductivity of the composites can be improved while reducing the coefficient of thermal expansion, ultimately enhancing the anti-ablation properties. However, there is an optimal PyC thickness where further increases can lead to an increase in ablation rates.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Ceramics

The effect of carbon source addition order during sol-gel process on the properties of C/C-ZrC-SiC composites

Chen Zeng et al.

Summary: Optimizing the addition order of carbon source during sol-gel process can greatly improve the properties of C/C-ZrC-SiC composites, including microstructure, mechanical property, and ablation resistance. The excellent performance is attributed to little erosion of carbon fibers and the dense matrix of ZrC-SiC ceramics obtained from adding carbon source before gelation.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Ablation behavior of (Zr,Ta)B2-SiC coating on carbon/carbon composites at 2300 °C

Kai Tong et al.

Summary: The Zr-Ta-B-SiC multiphase coating prepared on carbon/carbon composites exhibited excellent ablation resistance at high temperatures, with the key antiablative component being the (Zr,Ta)B-2 solid solution. The micromorphology and distribution of Zr-Ta-O in the coating played a vital role in protective layer evolution and ablation performance, with a coating containing around 30% Ta beneficial for stabilizing the t-ZrO2 phase and alleviating volume change. The formation of a thermal barrier and low volatility of the Zr-Ta-O layer were responsible for the coating's outstanding ablation resistance.

CORROSION SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure and ablation behavior of Zr-Ti-Si-C multiphase coating fabricated by solid solution and in-situ reaction

Anhong Shi et al.

Summary: Zr-Ti-Si-C solid solution coatings were fabricated by solid solution and in-situ reaction methods, and the effects of TiC on microstructure, phase evolution, and ablation behavior were investigated. The solid solution structure reduced the active oxidation of Si source, enhanced ablative properties of the coatings.

CORROSION SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Comparative insights into C/C-ZrC-SiC composites with different substrate carbon on microstructures, mechanical properties, and ablation behaviors

Zheng Peng et al.

Summary: The study systematically researched the microstructures, mechanical properties, and ablation behaviors of C/C-ZrC-SiC composites fabricated using different carbon substrates, finding that C/PyC-ZrC-SiC composites had higher flexural strength while C/RdC-ZrC-SiC composites exhibited better ablation resistance after exposure to oxyacetylene ablation.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Materials Science, Ceramics

Spark plasma sintering of quadruplet ZrB2-SiC-ZrC-Cf composites

Farhad Adibpur et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical, oxidation and ablation properties of C/(C-SiC)CVI-(ZrC-SiC)PIP composites

Jinjin Yao et al.

CORROSION SCIENCE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of ZrC/SiC ratios on mechanical and ablation behavior of C/C-ZrC-SiC composites prepared by carbothermal reaction of hydrothermal co-deposited oxides

Haibo Ouyang et al.

CORROSION SCIENCE (2020)

Add to Collection

Article Materials Science, Ceramics

Ablation behavior and mechanism of Cf/SiBCN composites in plasma ablation flame

Qi Ding et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)

Add to Collection

Article Materials Science, Ceramics

Effects of LaB6 on the microstructures and ablation properties of 3D C/C-SiC-ZrB2-LaB6 composites

Cunqian Fang et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Fracture toughness and hardness investigation in ZrB2-SiC-ZrC composite

Arsalan Rezapour et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

Add to Collection

Article Materials Science, Ceramics

Effect of ZrC particle distribution on the ablation resistance of C/C-SiC-ZrC composites fabricated using precursor infiltration pyrolysis

Xiaowei Wu et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Long time ablation behaviors of designed ZrC-SiC-TiC ternary coatings for environments above 2000 °C

Xiaohui Pan et al.

CORROSION SCIENCE (2020)

Add to Collection

Article Materials Science, Ceramics

Co-reinforcing of ZrB2-SiC ceramics with optimized ZrC to Cf ratio

Farhad Adibpur et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Chemistry, Physical

Corrosion resistance of ZrO2 films under different humidity coal gas conditions at high temperature

Jiao Yu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Materials Science, Ceramics

Densification, microstructure, and mechanical properties of ZrC-SiC ceramics

Lun Feng et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)

Add to Collection

Article Materials Science, Ceramics

Properties of Cf/SiC-ZrB2-TaxCy composite produced by reactive hot pressing and polymer impregnation pyrolysis (RHP/PIP)

Rajaguru Kannan et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Add to Collection

Article Materials Science, Ceramics

Mg2SiO4 as a novel thermal barrier coating material for gas turbine applications

Si Chen et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Add to Collection

Article Materials Science, Ceramics

Ablation behaviors of ZrC-TiC coatings prepared by vacuum plasma spray: Above 2000 °C

Xiaohui Pan et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Add to Collection

Article Materials Science, Ceramics

Microstructure and ablation properties of La2O3 modified C/C-SiC composites prepared via precursor infiltration pyrolysis

Cunqian Fang et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Add to Collection

Article Materials Science, Ceramics

Oxidation behavior of ZrB2-SiC-ZrC in oxygen-hydrogen torch environment

Yuki Kubota et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)

Add to Collection

Article Materials Science, Ceramics

Viscosity of glass-forming systems

Qiuju Zheng et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)

Add to Collection

Article Materials Science, Ceramics

Oxidation behavior of ZrB2-SiC-ZrC at 1700 °C

Yuki Kubota et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Ablation mechanism of C/C-ZrB2-ZrC-SiC composite fabricated by polymer infiltration and pyrolysis with preform of Cf/ZrB2

Dong Huang et al.

CORROSION SCIENCE (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Thermomechanical properties of a spark plasma sintered ZrC-SiC composite obtained by a precursor derived ceramic route

G. Antou et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

Add to Collection

Article Multidisciplinary Sciences

Prediction of novel stable compounds in the Mg-Si-O system under exoplanet pressures

Haiyang Niu et al.

SCIENTIFIC REPORTS (2015)

Add to Collection

Article Chemistry, Physical

Effects of porous C/C density on the densification behavior and ablation property of C/C-ZrC-SiC composites

Ke-zhi Li et al.

CARBON (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanism of ablation of 3D C/ZrC-SiC composite under an oxyacetylene flame

Si'an Chen et al.

CORROSION SCIENCE (2013)

Add to Collection

Article Geosciences, Multidisciplinary

First principles viscosity and derived models for MgO-SiO2 melt system at high temperature

Bijaya B. Karki et al.

GEOPHYSICAL RESEARCH LETTERS (2013)

Add to Collection

Article Materials Science, Coatings & Films

Atmospheric Plasma Sprayed Forsterite (Mg2SiO4) Coatings: An Investigation of the Processing-Microstructure-Performance Relationship

C. V. Cojocaru et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Nanosize stabilization of cubic and tetragonal phases in reactive plasma synthesized zirconia powders

S. Jayakumar et al.

MATERIALS CHEMISTRY AND PHYSICS (2013)

Add to Collection

Article Materials Science, Multidisciplinary

The effect of MgO and SiO2 codoping on the properties of Nd:YAG transparent ceramic

Hao Yang et al.

OPTICAL MATERIALS (2012)

Add to Collection

Article Materials Science, Ceramics

Ta2O5-Y2O3-ZrO2 system: Experimental study and preliminary thermodynamic description

Anup K. Bhattacharya et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2011)

Add to Collection

Article Materials Science, Composites

Oxidation-resistant ZrB2-SiC composites at 2200 °C

Jiecai Han et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2008)

Add to Collection

Article Chemistry, Physical

Effects of Y2O3 on microstructure and mechanical properties of ZrB2-SiC ceramics

Xinghong Zhang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2008)

Add to Collection

Article Materials Science, Ceramics

The use of MgO-coated SiC powders as low temperature densification materials

Zafer Tatli et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2007)

Add to Collection

Article Materials Science, Multidisciplinary

Comparison of ZrB2-ZrC-SiC composites fabricated by spark plasma sintering and hot-pressing

V Medri et al.

ADVANCED ENGINEERING MATERIALS (2005)

Add to Collection

Article Materials Science, Ceramics

Liquid phase sintering of SiC with additions of Y2O3, Al2O3 and SiO2

E Gomez et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2004)

Add to Collection

Article Materials Science, Ceramics

Liquid-phase sintering of SiC in presence of CaO

MF Zawrah et al.

CERAMICS INTERNATIONAL (2004)

Add to Collection

Article Materials Science, Ceramics

Abnormal grain growth in alumina with anorthite liquid and the effect of MgO addition

CW Park et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2002)

Add to Collection

Article Materials Science, Multidisciplinary

Chemical synthesis of nanocrystals of tantalum ion-doped tetragonal zirconia

JC Ray et al.

MATERIALS LETTERS (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.