Related references
Note: Only part of the references are listed.Adsorption and inhibition effect of tetraaza-tetradentate macrocycle ligand and its Ni (II), Cu (II) complexes on the corrosion of Cu10Ni alloy in 3.5% NaCl solutions
K. Shalabi et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)
Synergistic effect of 2-mercaptobenzimidazole and octylphosphonic acid as corrosion inhibitors for copper and aluminium - An electrochemical, XPS, FTIR and DFT study
Dzevad K. Kozlica et al.
CORROSION SCIENCE (2021)
On how the corrosion behavior and the functions of Cu, Ni and Mo of the weathering steel in environments with different NaCl concentrations
Tianyi Zhang et al.
CORROSION SCIENCE (2021)
Estimation of Corrosion Rate of AISI 1016 Steel by the Analysis of Polarization Curves and Using the Method of Measuring Ohmic Resistance
K. V. Rybalka et al.
RUSSIAN JOURNAL OF ELECTROCHEMISTRY (2021)
Enhanced Mechanical and Electrical Properties of a Cu-Ni-Si Alloy by Thermo-mechanical Processing
Lei Jiang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
SECM and EIS Studies of Galvanic Corrosion of Copper/Iron Connected to Automotive Parts in Seawater
Joseph Raj Xavier
METALS AND MATERIALS INTERNATIONAL (2020)
Electrochemical Impedance Spectroscopy for the Measurement of the Corrosion Rate of Magnesium Alloys: Brief Review and Challenges
Sebastian Feliu Jr
METALS (2020)
Field test of a reinforced concrete bridge under marine environmental corrosion
Haijun Zhou et al.
ENGINEERING FAILURE ANALYSIS (2020)
Corrosion mechanism investigation of TiAlN/CrN superlattice coating by multi-arc ion plating in 3.5 wt% NaCl solution
Lijun Wang et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Microstructure Evolution in Cu-Ni-Co-Si-Cr Alloy During Hot Compression by Ce Addition
Yijie Ban et al.
MATERIALS (2020)
High strength and high conductivity Cu alloys: A review
HuiYa Yang et al.
SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2020)
Effect of inclusion on strength and conductivity of Cu-Ni-Si alloys with discontinuous precipitation
Yicheng Cao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
An investigation into the effect of alloying elements on corrosion behavior of severely deformed Cu-Sn alloys by equal channel angular pressing
M. Ebrahimi et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2019)
Microstructure and properties of a Cu-Ni-Si-Co-Cr alloy with high strength and high conductivity
Zhilei Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of Ni/Si Mass Ratio and Thermomechanical Treatment on the Microstructure and Properties of Cu-Ni-Si Alloys
Jiang Li et al.
MATERIALS (2019)
Correlation of laboratory and real marine corrosion for the investigation of corrosion fatigue behaviour of steel components
Stefanos Gkatzogiannis et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Impact of biofilm in the maturation process on the corrosion behavior of galvanized steel: long-term evaluation by EIS
Tuba Unsal et al.
WORLD JOURNAL OF MICROBIOLOGY & BIOTECHNOLOGY (2019)
Review of nano-phase effects in high strength and conductivity copper alloys
Xiaohui Zhang et al.
NANOTECHNOLOGY REVIEWS (2019)
Insight into the mechanism of alloying elements (Sn, Be) effect on copper corrosion during long-term degradation in harsh marine environment
Decheng Kong et al.
APPLIED SURFACE SCIENCE (2018)
The corrosion behavior of Ni-Cu gradient layer on the nickel aluminum-bronze (NAB) alloy
Qin Luo et al.
CORROSION SCIENCE (2018)
Electrochemical polarization and impedance of reinforced concrete and hybrid fiber-reinforced concrete under cracked matrix conditions
Wilson Nguyen et al.
ELECTROCHIMICA ACTA (2018)
Cathodic Component of Corrosion Process: Polarization Curve with Two Tafel Portions
K. V. Rybalka et al.
RUSSIAN JOURNAL OF ELECTROCHEMISTRY (2018)
Solute Capture and Doping of Al in Cu2O: Corrosion, Tarnish Resistance, and Cation Release of High-Purity Cu-Al Alloys in Artificial Perspiration
M. J. Hutchison et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Influence of grain size on the electrochemical behavior of pure copper
L. Lapeire et al.
JOURNAL OF MATERIALS SCIENCE (2017)
A comparative study on corrosion kinetic parameter estimation methods for the early stage corrosion of Q345B steel in 3.5wt% NaCl solution
Shuang-yu Cai et al.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2017)
Nanostructuring of anodic copper oxides in fluoride-containing ethylene glycol media
Diego P. Oyarzun Jerez et al.
JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2017)
Effect of thermo-mechanical treatments on corrosion behavior of Cu-15Ni-8Sn alloy in 3.5 wt% NaCl solution
Yang Zhang et al.
MATERIALS CHEMISTRY AND PHYSICS (2017)
Corrosion behavior of novel Cu-Ni-Al-Si alloy with super-high strength in 3.5% NaCl solution
Jia-jun Zhu et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2017)
Electrical Conductivity of Cu and Cu-2vol.% Nb Powders and the Effect of Varying Sintering Temperatures on their Mechanical Properties Using Spark Plasma Sintering
A. A. Eze et al.
SILICON (2017)
An EIS analysis on corrosion resistance of anti-abrasion coating
Zhide Wang et al.
SURFACES AND INTERFACES (2017)
Enhanced Electrochemical Cu Release from Commercial Cu-Sn Alloys: Fate of the Alloying Elements in Artificial Perspiration
M. J. Hutchison et al.
ELECTROCHIMICA ACTA (2017)
EIS study on aerobic corrosion of copper in ground water: influence of micro-organisms
E. Huttunen-Saarivirta et al.
ELECTROCHIMICA ACTA (2017)
Corrosion behaviors and effects of corrosion products of plasma electrolytic oxidation coated AZ31 magnesium alloy under the salt spray corrosion test
Yan Wang et al.
APPLIED SURFACE SCIENCE (2016)
Effect of Aging Time on the Corrosion Behavior of a Cu-Ni-Si Alloy in 3.5 wt% NaCl Solution
Qian Lei et al.
CORROSION (2016)
Passivity of Metals Studied by Surface Analytical Methods, a Review
Hans-Henning Strehblow
ELECTROCHIMICA ACTA (2016)
Effect of Aging Time on the Corrosion Behavior of a Cu-Ni-Si Alloy in 3.5 wt% NaCl Solution
Qian Lei et al.
CORROSION (2016)
Corrosion product film formed on the 90/10 copper-nickel tube in natural seawater: Composition/structure and formation mechanism
A. L. Ma et al.
CORROSION SCIENCE (2015)
Tarnishing and Cu Ion release in Selected Copper-Base Alloys: Implications towards Antimicrobial Functionality
D. J. Horton et al.
ELECTROCHIMICA ACTA (2015)
Surface characterization and corrosion behavior of a novel gold-imitation copper alloy with high tarnish resistance in salt spray environment
Zhu Xiao et al.
CORROSION SCIENCE (2013)
2-Mercaptobenzimidazole as a copper corrosion inhibitor: Part II. Surface analysis using X-ray photoelectron spectroscopy
Matjaz Finsgar
CORROSION SCIENCE (2013)
Effect of grain size on corrosion of high purity aluminium
K. D. Ralston et al.
ELECTROCHIMICA ACTA (2011)
Measurement of the corrosion rate of magnesium alloys using Tafel extrapolation
Zhiming Shi et al.
CORROSION SCIENCE (2010)
Dynamics of phase transformation of Cu-Ni-Si alloy with super-high strength and high conductivity during aging
Lei Qian et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2010)
Copper and brass aged at open circuit potential in slightly alkaline solutions
R. Procaccini et al.
ELECTROCHIMICA ACTA (2009)
Surface characterization and corrosion behavior of 70/30 Cu-Ni alloy in pristine and sulfide-containing simulated seawater
S. J. Yuan et al.
CORROSION SCIENCE (2007)
XPS applications in thin films research
SJ Geng et al.
MATERIALS TECHNOLOGY (2002)
Copper corrosion at various pH values with and without the inhibitor
M Metikos-Hukovic et al.
JOURNAL OF APPLIED ELECTROCHEMISTRY (2000)
Share Paper
