Related references
Note: Only part of the references are listed.Experimental Evaluation and Modeling of Physical Hardening in Asphalt Binders
Chiara Tozzi et al.
MATERIALS (2022)
Lessons learned from 60 years of pavement trials in continental climate regions of Canada
Jianmin Ma et al.
CHEMICAL ENGINEERING JOURNAL (2022)
Investigation on the effect of physical hardening and aging temperature on low-temperature rheological properties of asphalt binder
Di Wang et al.
ROAD MATERIALS AND PAVEMENT DESIGN (2021)
Another look at the use of modulated differential scanning calorimetry to study thermoreversible aging phenomena in asphalt binders
Haibo Ding et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Effective control of flexible asphalt pavement cracking through quality assurance testing of extracted and recovered binders
Yiming Li et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Predicting the low-temperature performance of asphalt binder based on rheological model
Jiaqiu Xu et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Thermoreversible aging in model asphalt binders
Haibo Ding et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Enhanced Acceptance Specification of Asphalt Binder to Drive Sustainability in the Paving Industry
Yiming Li et al.
MATERIALS (2021)
Determining the Sustainable Component of Wax-Based Warm Mix Additives for Improving the Cracking Resistance of Asphalt Binders
Haopeng Zhang et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)
Clustering aged bitumens through multivariate statistical analyses using phase angle master curve
Rodrigo Shigueiro Siroma et al.
ROAD MATERIALS AND PAVEMENT DESIGN (2021)
Impact of the asphalt binder rheological behavior on the value of the ΔTc parameter
Didier Lesueur et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Study on the effects of reversible aging on the low temperature performance of asphalt binders
Jiaqiu Xu et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Relationship between Rheological Indices and Cracking Performance of Virgin, Recycled, and Rejuvenated Asphalt Binders and Mixtures
Fawaz Kaseer et al.
TRANSPORTATION RESEARCH RECORD (2021)
Improved performance grading of asphalt cement and hot mix asphalt in Ontario, Canada
Moses Akentuna et al.
INTERNATIONAL JOURNAL OF PAVEMENT RESEARCH AND TECHNOLOGY (2021)
Performance of asphalt mixtures with high recycled materials content and recycling agents
Fawaz Kaseer et al.
INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2020)
Rheological, fatigue and relaxation properties of aged bitumen
Ruxin Jing et al.
INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2020)
Quantification of asphalt binder ageing from apparent molecular weight distributions using a new approximated analytical approach of the phase angle
Khedidja Krolkral et al.
ROAD MATERIALS AND PAVEMENT DESIGN (2020)
Correlation of asphalt performance indicators and aging Degrees: A review
Feng Wang et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Improved models for the prediction of asphalt binder dynamic shear modulus and phase angle
Ibrahim Onifade et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Comparison of performance-based specification properties for asphalt binders sourced from around the world
Kristjan Lill et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
The crossover temperature: significance and application towards engineering balanced recycled binder blends
Lorena Garcia Cucalon et al.
ROAD MATERIALS AND PAVEMENT DESIGN (2019)
Oxidative and Thermoreversible Aging Effects on Performance-Based Rheological Properties of Six Latin American Asphalt Binders
Max Berkowitz et al.
ENERGY & FUELS (2019)
Pavement performance compared with asphalt properties for five contracts in Ontario
Seyed Tabib et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Damage characteristics of waste engine oil bottom rejuvenated asphalt binder in the non-linear range and its microstructure
Yanjun Qiu et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Durability assessment of asphalt binder
Ezequiel Angius et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Double-edge-notched tension testing of asphalt mastics
Sophie Campbell et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Performance grading of extracted and recovered asphalt cements
Haibo Ding et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Dynamic modulus and phase angle prediction of laboratory aged asphalt mixtures
Mona Nobakht et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Rheological Behavior and Its Chemical Interpretation of Crumb Rubber Modified Asphalt Containing Warm-Mix Additives
Haopeng Wang et al.
TRANSPORTATION RESEARCH RECORD (2018)
Effect of cooling medium on low-temperature properties of asphalt binder
Chiara Riccardi et al.
ROAD MATERIALS AND PAVEMENT DESIGN (2017)
Non-isothermal kinetic analysis of reversible ageing in asphalt cements
Amanda Rigg et al.
ROAD MATERIALS AND PAVEMENT DESIGN (2017)
Performance-Related Specifications for Asphalt Emulsions Used in Microsurfacing Treatments
Mohammad Ilias et al.
TRANSPORTATION RESEARCH RECORD (2017)
Preliminary experience with improved asphalt cement specifications in the City of Kingston, Ontario, Canada
Haibo Ding et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Advanced mechanical characterization of asphalt mastics containing tourmaline modifier
Haibo Ding et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Fatigue behavior of epoxy asphalt concrete and its moisture susceptibility from flexural stiffness and phase angle
Sang Luo et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Influence of RAP sources and proportions on fracture and low temperature cracking performance of polymer modified binder
Dharamveer Singh et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Effect of recycled engine oil bottoms on the ductile failure properties of straight and polymer-modified asphalt cements
Migle Paliukaite et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Extension of Modified Havriliak-Negami Model to Characterize Linear Viscoelastic Properties of Asphalt Binders
Yanqing Zhao et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2016)
What is Transition Temperature for Bitumen and How to Measure It?
M. R. Nivitha et al.
TRANSPORTATION IN DEVELOPING ECONOMIES (2016)
Characterization of asphalt concrete linear viscoelastic behavior utilizing Havriliak-Negami complex modulus model
Yiren Sun et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Evaluation of the Rheological Properties and Activation Energy of Virgin and Recovered Asphalt Binder Blends
Ali Jamshidi et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2015)
Exploring low-temperature performance in Black Space
David J. Mensching et al.
ROAD MATERIALS AND PAVEMENT DESIGN (2015)
Molecular weight distribution of asphaltic paving binders from phase-angle measurements
Andrea Themeli et al.
ROAD MATERIALS AND PAVEMENT DESIGN (2015)
The Influence of Binder Rheology on the Cracking of Asphalt Mixes in Airport and Highway Projects
G. M. Rowe et al.
JOURNAL OF TESTING AND EVALUATION (2014)
A consistent approach for characterising asphalt concrete based on generalised Maxwell or Kelvin model
Yanqing Zhao et al.
ROAD MATERIALS AND PAVEMENT DESIGN (2014)
Modelling the rheological properties of bituminous binders using mathematical equations
Nur Izzi Md Yusoff et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Characterization of Linear Viscoelastic Behavior of Asphalt Concrete Using Complex Modulus Model
Yanqing Zhao et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2013)
How to Construct an Asphalt Binder Master Curve and Assess the Degree of Blending between RAP and Virgin Binders
Abbas Booshehrian et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2013)
Influence of reclaimed asphalt pavement content on complex modulus of asphalt binder blends and corresponding mixes: experimental results and modelling
S. Mangiafico et al.
ROAD MATERIALS AND PAVEMENT DESIGN (2013)
Evolution of the Crossover Modulus with Oxidative Aging Method to Estimate Change in Viscoelastic Properties of Asphalt Binder with Time and Depth on the Road
Michael J. Farrar et al.
TRANSPORTATION RESEARCH RECORD (2013)
Characterizing Permanent Deformation and Fracture of Asphalt Mixtures by Using Compressive Dynamic Modulus Tests
Yuqing Zhang et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2012)
Life-Cycle Greenhouse Gas Emissions of Materials Used in Road Construction
Christopher S. Hanson et al.
TRANSPORTATION RESEARCH RECORD (2012)
Modelling the linear viscoelastic rheological properties of bituminous binders
Nur Izzi Md. Yusoff et al.
CONSTRUCTION AND BUILDING MATERIALS (2011)
Rheological Characterization of the Gel Point in Polymer-Modified Asphalts
M. A. Vargas et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2011)
Effects of Physical Hardening on Stress Relaxation in Asphalt Cements Implications for Pavement Performance
Michael Evans et al.
TRANSPORTATION RESEARCH RECORD (2011)
Experimental investigation on sol-gel transition of asphalt
A. Padmarekha et al.
INTERNATIONAL JOURNAL OF ADVANCES IN ENGINEERING SCIENCES AND APPLIED MATHEMATICS (2011)
Evaluation of asphalt mixtures' viscoelastic properties using phase angle relationships
Krishna Prapoorna Biligiri et al.
INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2010)
Triaxial Frequency Sweep Characterization of Asphalt-Aggregate Adhesion in Saskatchewan Asphaltic Mixes
Curtis Berthelot et al.
JOURNAL OF TRANSPORTATION ENGINEERING (2010)
New Technique for Measuring Low-Temperature Properties of Asphalt Binders with Small Amounts of Material
Changping Sui et al.
TRANSPORTATION RESEARCH RECORD (2010)
Investigation of the dynamic and fatigue properties of fiber-modified asphalt mixtures
Qunshan Ye et al.
INTERNATIONAL JOURNAL OF FATIGUE (2009)
Asphalt pavement cracking: analysis of extraordinary life cycle variability in eastern and northeastern Ontario
Simon A. M. Hesp et al.
INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2009)
Asphalt Cement Loss Tangent as Surrogate Performance Indicator for Control of Thermal Cracking
Abdolrasoul Soleimani et al.
TRANSPORTATION RESEARCH RECORD (2009)
Rubber concentrations on rheology of aged asphalt binders
Shin-Che Huang
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2008)
Reversible aging in asphalt binders
Simon A. M. Hesp et al.
ENERGY & FUELS (2007)
Direct measurement of asphalt binder thermal cracking
SS Kim
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2005)
Steric hardening and the ordering of asphaltenes in bitumen
JF Masson et al.
ENERGY & FUELS (2005)
Macrostructure and rheological properties of chemically modified residues and bitumens
C Giavarini et al.
ENERGY & FUELS (2000)