Related references
Note: Only part of the references are listed.Assessment of bonding durability of CLT and glulam made from oak and mixed poplar-oak according to bonding pressure and glue type
Citra Yanto Ciki Purba et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Hydroxymethylated resorcinol (HMR) primer to improve the performance of wood-adhesive bonds-A review
Thomas Boeger et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2022)
Effects of cryogenic temperature on some mechanical properties of beech (Fagus orientalis Lipsky) wood
Osman Emre Ozkan
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2021)
The Influence of Wood Moisture Content on the Processes of Freezing and Heating
Ivan Klement et al.
APPLIED SCIENCES-BASEL (2021)
Effects of Freeze-Thaw Cycles on Physical and Mechanical Properties of Glulam Exposed to Outdoor Environment
Ruyuan Yang et al.
JOURNAL OF RENEWABLE MATERIALS (2021)
Engineering of material properties by adhesive selection at the example of a novel structural wood material
Peter Bliem et al.
JOURNAL OF ADHESION (2020)
Scots Pine and Norway Spruce Wood Properties at Sites with Different Stand Densities
Benas Silinskas et al.
FORESTS (2020)
Use of northern hardwoods in glued-laminated timber: a study of bondline shear strength and resistance to moisture
Alexandre Morin-Bernard et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2020)
Comparison and Analysis of Radial and Tangential Bending of Softwood and Hardwood at Static and Dynamic Loading
Vlastimil Boruvka et al.
FORESTS (2020)
Black Alder (Alnus glutinosa L.)-a Resource for Value-Added Products in Furniture Industry Under European Screening
Emilia-Adela Salca
CURRENT FORESTRY REPORTS (2019)
Moisture-induced stresses in large glulam beams. Case study: Vihantasalmi Bridge
Stefania Fortino et al.
WOOD MATERIAL SCIENCE & ENGINEERING (2019)
Performance of glue laminated timber beams composed of sengon wood (Albizia falcatara) and coconut wood (Cocos nucifera) with nylon-threads reinforcement
Kusnindar et al.
4TH INTERNATIONAL CONFERENCE ON REHABILITATION AND MAINTENANCE IN CIVIL ENGINEERING (ICRMCE 2018) (2018)
Physical and Mechanical Properties of Fast-Growing Wood Subjected to Freeze-Heat Treatments
Andre L. Missio et al.
BIORESOURCES (2016)
Effects of Pre-Freezing Prior to Drying upon Some Physical and Mechanical Properties of Eucalyptus urophylla × Eucalyptus grandis Wood
Hongda Liu et al.
BioResources (2015)
Effect of cold temperatures on the shear behavior of glued laminated beams
Garrett Drake et al.
COLD REGIONS SCIENCE AND TECHNOLOGY (2015)
Flexural property of wood in low temperature environment
Liyuan Zhao et al.
COLD REGIONS SCIENCE AND TECHNOLOGY (2015)
Modeling temperature effect on dynamic modulus of elasticity of red pine (Pinus resinosa) in frozen and non-frozen states
Shan Gao et al.
HOLZFORSCHUNG (2015)
Heat Resistance of Glued Finger Joints in Spruce Wood Constructions
Martin Sviták et al.
BioResources (2014)
Effects of temperature and moisture content on selected wood mechanical properties involved in the chipping process
Roger E. Hernandez et al.
WOOD SCIENCE AND TECHNOLOGY (2014)
Glulam from European White Oak: Finger Joint Influence on Bending Size Effect
Simon Aicher et al.
MATERIALS AND JOINTS IN TIMBER STRUCTURES: RECENT DEVELOPMENTS OF TECHNOLOGY (2014)
Strength reduction of spruce wood through slow freezing
M. B. Szmutku et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2013)
Climate change may cause severe loss in the economic value of European forest land
Marc Hanewinkel et al.
NATURE CLIMATE CHANGE (2013)
The effect of climate variations on glulam-an experimental study
Vanessa Angst et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2012)
Thermal stability of glued wood joints measured by shear tests
Sebastian Clauss et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2011)
Study of improvement of bonding properties of Larch glued laminated timber
R. X. Cheng et al.
PIGMENT & RESIN TECHNOLOGY (2010)
Pre-freezing as a pre-treatment for thermal modification of wood. Part 2: surface properties and termite resistance
L. Awoyemi et al.
JOURNAL OF THE INDIAN ACADEMY OF WOOD SCIENCE (2010)
Considerations on drying frozen spruce wood and effects upon its properties
Mihaela Campean et al.
DRYING TECHNOLOGY (2008)
Thermal stability of structural one-component polyurethane adhesives for wood - Structure-property relationship
K. Richter et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2006)
Thermal stability of wood-wood and wood-FRP bonding with polyurethane and epoxy adhesives
K Richter et al.
ADVANCED ENGINEERING MATERIALS (2005)
Share Paper
