Journal
CONSTRUCTION AND BUILDING MATERIALS
Volume 347, Issue -, Pages -Publisher
ELSEVIER SCI LTD
DOI: 10.1016/j.conbuildmat.2022.128579
Keywords
Self -consolidating earth paste; Clay; Ternary -binder system; Taguchi analysis; Atterberg limits
Categories
Funding
- National Science and Engineering Research Council of Canada (NSERC)
- NSERC Chair on Development of Flowable Concrete with Adapted Rheology
Ask authors/readers for more resources
Rammed earth (RE) construction is a sustainable method with economic and environmental advantages. The use of self-consolidating earth concrete (SCEC) can speed up the construction process, but developing SCEC is challenging due to clay. This study evaluates the effect of different parameters and establishes models to predict the workability of self-consolidating earth paste (SCEP).
Rammed earth (RE) construction is an ancient sustainable construction method, which offers various economic and environmental advantages such as the availability of local materials. However, RE construction is a very time-consuming and labor-intensive process due to the consolidation required to achieve the targeted perfor-mance. The use of self-consolidating earth concrete (SCEC) can facilitate casting and speed the construction process. However, developing SCEC is challenging due to the presence of clay in earth, which can significantly hinder flowability. Optimizing the paste matrix of SCEC, namely self-consolidating earth paste (SCEP), is essential for achieving targeted workability performance of SCEC. In this study, the Taguchi method was employed to evaluate the effect of various mixture parameters, including clay and admixture type, cement content, and water-to-powder (W/P) and cement-to-clay (Ce/Cl) ratios to proportion SCEP mixtures. These parameters form different binder compositions with various Atterberg limits and water contents to investigate the compatibility and efficiency of different admixture types on the workability and compressive strength of their corresponding SCEP mixtures. Adequate clay dispersion was achieved using sodium hexametaphosphate (NaHMP) whereas polycarboxylate ether (PCE) was only efficient on cement particles. Sodium silicate (NaSil) did not contribute to dispersion of single-powder systems, while sodium polynaphtalene (PNS) and non-esterified polycarboxylate (NE-PC) showed compatibility with both clay and cement particles. Signal-to-noise ratio (S/ N) analyses revealed that lower cement content and higher W/P and Ce/Cl resulted in lower admixture demand for targeted workability and marsh cone test (MCT) values. Regarding 1-day compressive strength, to facilitate the demolding process, PNS, PCE and NaSil showed the highest efficiency. As concluded from the analysis of variance (ANOVA), clay and admixture type had the highest contribution on workability, while cement content and W/P were significant on compressive strength. Several theoretical models were also established to predict the workability of SCEP mixtures from Atterberg limits of the corresponding soil. Finally, a new SCEP propor-tioning approach was proposed based on the established models and compressive strength contours to be used for different earth types.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available