4.7 Article

Self-heating capacity of electrically conductive cement composites: Effects of curing conditions

Related references

Note: Only part of the references are listed.
Article Construction & Building Technology

Self-heating characteristics of electrically conductive cement composites with carbon black and carbon fiber

Seongwoo Gwon et al.

Summary: This study focuses on the investigation of self-heating characteristics of electrically conductive cement composites (ECCC) and suggests an effective and affordable mix design for ECCC blocks to accelerate the curing of concrete. Carbon black and carbon fibers are used as conductive agents. The presence of carbon fibers is critical for reducing electrical resistivity, while an increase in carbon black content up to 0.8 vol% leads to a drastic decrease in electrical resistivity and achieves the highest average surface temperature of ECCC. The dispersion degree of carbon black affects the trends. The accelerated curing of ordinary cement paste using the ECCC blocks with 0.8 vol% carbon black results in more hydrated phases and a reduction in porosity.

CEMENT & CONCRETE COMPOSITES (2023)

Article Mechanics

Cyclic heating and mechanical properties of CNT reinforced cement composite

Young Cheol Choi

Summary: The study found that with the increase of CNT dosage, the temperature of the specimens also increased, but more heating cycles may lead to a decrease in heating performance. This is likely attributed to the occurrence of microcracks caused by different thermal expansion coefficients, and the additional hydrates generated by the increased temperature of the specimens.

COMPOSITE STRUCTURES (2021)

Article Construction & Building Technology

Effect of plant cellulose microfibers on hydration of cement composites

Seongwoo Gwon et al.

Summary: This study investigated the hydration characteristics of cement composites incorporating plant cellulose microfibers (CMFs) as a sustainable additive. The findings suggest that a higher amount of CMFs generally leads to a larger delay in the setting time and lower compressive strength, but mixtures with 0.3-0.6% CMFs showed reasonably high strengths compared to plain mixtures. The CMFs refined the pore structures of the cement composites and promoted further hydration.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Crystallography

Correlation Analysis of Heat Curing and Compressive Strength of Carbon Nanotube-Cement Mortar Composites at Sub-Zero Temperatures

Heeyoung Lee et al.

Summary: This study investigated the effects of sub-zero ambient temperature and MWCNT content on the heat and strength characteristics of heat-cured MWCNT cementitious composites. Results showed that the use of an insulation box and heat curing can increase the internal temperature change and compressive strength of the cementitious composite. Additionally, a MWCNT network among the cement hydrates was verified through microstructure analysis.

CRYSTALS (2021)

Article Materials Science, Composites

Cement composites with expanded graphite as resistance heating elements

Maksymilian Frac et al.

JOURNAL OF COMPOSITE MATERIALS (2020)

Article Construction & Building Technology

Self-heating and electrical performance of carbon nanotube-enhanced cement composites

Heeyoung Lee et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Green & Sustainable Science & Technology

Fly ash-based geopolymer with self-heating capacity for accelerated curing

Jingming Cai et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Review Engineering, Multidisciplinary

A state-of-the-art on self-sensing concrete: Materials, fabrication and properties

Zhuang Tian et al.

COMPOSITES PART B-ENGINEERING (2019)

Review Construction & Building Technology

A review on material design, performance, and practical application of electrically conductive cementitious composites

Lining Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Report of TC 238-SCM: hydration stoppage methods for phase assemblage studies of blended cements-results of a round robin test

Ruben Snellings et al.

MATERIALS AND STRUCTURES (2018)

Article Materials Science, Ceramics

Dispersion of carbon fibers and conductivity of carbon fiber-reinforced cement-based composites

Wang Chuang et al.

CERAMICS INTERNATIONAL (2017)

Article Engineering, Manufacturing

Electrical conductivity and piezo-resistive characteristics of CNT and CNF incorporated cementitious nanocomposites under static and dynamic loading

Saptarshi Sasmal et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)

Article Construction & Building Technology

Effects of graphene oxide on early-age hydration and electrical resistivity of Portland cement paste

Wengui Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Engineering, Multidisciplinary

Micromechanics modeling of the electrical conductivity of carbon nanotube cement-matrix composites

Enrique Garcia-Macias et al.

COMPOSITES PART B-ENGINEERING (2017)

Article Construction & Building Technology

Effect of relative humidity decrease due to self-desiccation on the hydration kinetics of cement

Mateusz Wyrzykowski et al.

CEMENT AND CONCRETE RESEARCH (2016)

Article Construction & Building Technology

Self-heating and deicing conductive cement. Experimental study and modeling

J. Gomis et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Engineering, Multidisciplinary

Percolation backbone structure analysis in electrically conductive carbon fiber reinforced cement composites

Ning Xie et al.

COMPOSITES PART B-ENGINEERING (2012)

Article Construction & Building Technology

Effect of porosity on thermal expansion coefficient of cement pastes and mortars

Qiang Zeng et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

Article Construction & Building Technology

The effect of temperature on the hydration of composite cements containing limestone powder and fly ash

K. De Weerdt et al.

MATERIALS AND STRUCTURES (2012)

Article Construction & Building Technology

Nonlinear conduction in carbon fiber reinforced cement mortar

Jing Xu et al.

CEMENT & CONCRETE COMPOSITES (2011)

Article Construction & Building Technology

Energy-Efficient Approach to Cold-Weather Concreting

Lynette A. Barna et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2011)

Article Construction & Building Technology

Effects of mineral admixtures on the thermal expansion properties of hardened cement paste

Zhong-he Shui et al.

CONSTRUCTION AND BUILDING MATERIALS (2010)

Article Materials Science, Multidisciplinary

Negative Temperature Coefficient of Resistivity in Lightweight Conductive Carbon Nanotube/Polymer Composites

Zhi-Dong Xiang et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2009)

Article Instruments & Instrumentation

A feasibility study of self-heating concrete utilizing carbon nanofiber heating elements

Christiana Chang et al.

SMART MATERIALS AND STRUCTURES (2009)

Article Construction & Building Technology

Change in microstructure of hardened cement paste subjected to elevated temperatures

Gai-Fei Peng et al.

CONSTRUCTION AND BUILDING MATERIALS (2008)

Article Construction & Building Technology

Experimental studies on the indoor electrical floor heating system with carbon black mortar slabs

Mingqing Sun et al.

ENERGY AND BUILDINGS (2008)

Article Construction & Building Technology

Thermal dilation and internal relative humidity of hardened cement paste

Zachary C. Grasley et al.

MATERIALS AND STRUCTURES (2007)

Article Construction & Building Technology

Coefficient of thermal expansion of cement paste and concrete: Mechanisms of moisture interaction

E. J. Sellevold et al.

MATERIALS AND STRUCTURES (2006)

Article Construction & Building Technology

Electrically conductive cement-based materials

DDL Chung

ADVANCES IN CEMENT RESEARCH (2004)

Article Construction & Building Technology

Electrical resistance change in compact tension specimens of carbon fiber cement composites

F Reza et al.

CEMENT & CONCRETE COMPOSITES (2004)