☆ 4.7 Article

How can the effect of particle surface roughness on the contact area be predicted?

COMPUTERS AND GEOTECHNICS (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Geological

3D fractal analysis of multi-scale morphology of sand particles with μCT and interferometer

Hong-Wei Yang et al.

Summary: This paper proposes a novel methodology to characterize the particle morphology of sand particles across different scales. The methodology is applied to crushed granitic rock and natural quarzitic sand particles, and the results show different fractal dimensions and self-affine patterns for different types of sand particles. The translation of surface measurements into numerically reconstructed particle morphology is demonstrated using spherical harmonic expansion and power spectral density functions.

GEOTECHNIQUE (2022)

Add to Collection

Article Engineering, Geological

Evolution of surface roughness of single sand grains with normal loading

Ting Yao et al.

Summary: The surface roughness of soil grains plays a significant role in the friction angle and stiffness of soil. This study investigates the evolution of surface roughness of natural sand grains under increasing normal load. It is found that the plastic deformation of asperities and bulk of sand grains affect the surface roughness. As the normal load increases, the surface roughness decreases initially and then tends to remain constant.

GEOTECHNIQUE (2022)

Add to Collection

Article Engineering, Chemical

A Fully Coupled Normal and Tangential Contact Model to Investigate the Effect of Surface Roughness on the Partial Slip of Dissimilar Elastic Materials

Dongze Wang et al.

Summary: The newly developed algorithm provides stable solutions to partial-slip problems of elastically dissimilar materials by adopting a global search method and an alternative convergence criterion. The study shows that surface roughness parameters have an influence on partial-slip solutions under coupled conditions, with different results at different loads.

TRIBOLOGY LETTERS (2022)

Add to Collection

Article Engineering, Chemical

On stickiness of multiscale randomly rough surfaces

G. Violano et al.

Summary: The new criterion for stickiness in solids with random fractal roughness, based on Persson's theory with DMT-type adhesion, shows that stickiness is unaffected by the truncation of the PSD spectrum at short wavelengths. With typical nanometer values of attractive forces, the criterion justifies the well-known Dalhquist criterion for stickiness, which requires adhesives to have an elastic modulus below about 1 MPa.

JOURNAL OF ADHESION (2021)

Add to Collection

Article Engineering, Mechanical

Scale and surface morphology effects on the micromechanical contact behavior of granular materials

Chitta Sai Sandeep et al.

Summary: The study found that the normal and tangential stiffness of glass specimens increased with increasing grain diameter, but decreased with increasing equivalent surface roughness. Interface friction increased with increasing equivalent surface roughness, but was not heavily dependent on grain size. Rough interfaces had extended slip displacements, resulting in slower degradation of stiffness.

TRIBOLOGY INTERNATIONAL (2021)

Add to Collection

Article Engineering, Geological

A contact model for rough crushable sand

Ningning Zhang et al.

Summary: In this study, the combination of DEM particle crushing model and rough Hertzian contact model was explored to improve the accuracy and effectiveness of DEM models, especially in the process of particle crushing. Through simulations, it was found that accurately incorporating contact roughness values into the model can better capture particle size evolution and mechanical responses.

SOILS AND FOUNDATIONS (2021)

Add to Collection

Article Engineering, Chemical

Quantitative evaluation of surface roughness for granular materials using Gaussian filter method

Yang Li et al.

Summary: This study introduces a methodology to measure surface roughness of granular materials using a Gaussian filter and known roughness surfaces, determining optimal cut-off wavelengths for various materials. An empirical regression equation is derived to describe the relationship between root mean square roughness, particle size, and cut-off wavelength. The application of this Gaussian filter method is validated for different shapes of granular materials, including glass beads and natural sand grains.

POWDER TECHNOLOGY (2021)

Add to Collection

Article Engineering, Mechanical

Universal features in stickiness criteria for soft adhesion with rough surfaces

M. Ciavarella

TRIBOLOGY INTERNATIONAL (2020)

Add to Collection

Article Mathematics, Interdisciplinary Applications

Effect of particle roughness on the bulk deformation using coupled boundary element and discrete element methods

Sadegh Nadimi et al.

COMPUTATIONAL PARTICLE MECHANICS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Can friction replace roughness in the numerical simulation of granular materials?

Guilhem Mollon et al.

GRANULAR MATTER (2020)

Add to Collection

Article Engineering, Geological

Development of inter-particle friction in a railway ballast

C. P. Y. Wong et al.

GEOTECHNIQUE LETTERS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Numerical modelling of rough particle contacts subject to normal and tangential loading

S. Nadimi et al.

GRANULAR MATTER (2019)

Add to Collection

Article Engineering, Chemical

A modified form of Pastewka-Robbins criterion for adhesion

M. Ciavarella et al.

JOURNAL OF ADHESION (2018)

Add to Collection

Article Engineering, Geological

Experimental and DEM assessment of the stress-dependency of surface roughness effects on shear modulus

Masahide Otsubo et al.

SOILS AND FOUNDATIONS (2018)

Add to Collection

Article Polymer Science

Phospholipid-Coated Mesoporous Silica Nanoparticles Acting as Lubricating Drug Nanocarriers

Tao Sun et al.

POLYMERS (2018)

Add to Collection

Article Engineering, Geological

An experimental micromechanical study of sand grain contacts behavior from different geological environments

C. S. Sandeep et al.

ENGINEERING GEOLOGY (2018)

Add to Collection

Article Engineering, Geological

The influence of particle surface roughness on elastic stiffness and dynamic response

M. Otsubo et al.

GEOTECHNIQUE (2017)

Add to Collection

Article Engineering, Chemical

The influence of surface roughness and adhesion on particle rolling

R. Wilson et al.

POWDER TECHNOLOGY (2017)

Add to Collection

Article Engineering, Multidisciplinary

Towards stochastic discrete element modelling of spherical particles with surface roughness: A normal interaction law

Y. T. Feng et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2017)

Add to Collection

Article Physics, Applied

Contact area of rough spheres: Large scale simulations and simple scaling laws

Lars Pastewka et al.

APPLIED PHYSICS LETTERS (2016)

Add to Collection

Article Multidisciplinary Sciences

Characterization of the surface roughness of sand particles using an advanced fractal approach

Hongwei Yang et al.

PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2016)

Add to Collection

Article Engineering, Mechanical

Development of a new mechano-chemical model in boundary lubrication

Ali Ghanbarzadeh et al.

TRIBOLOGY INTERNATIONAL (2016)

Add to Collection

Article Engineering, Mechanical

A dimensionless measure for adhesion and effects of the range of adhesion in contacts of nominally flat surfaces

Martin H. Mueser

TRIBOLOGY INTERNATIONAL (2016)

Add to Collection

Article Engineering, Mechanical

Static friction at fractal interfaces

Dorian A. H. Hanaor et al.

TRIBOLOGY INTERNATIONAL (2016)

Add to Collection

Article Engineering, Chemical

Tribological Properties of Sliding Shale Rock-Alumina Contact in Hydraulic Fracturing

Huaping Xiao et al.

TRIBOLOGY LETTERS (2016)

Add to Collection

Article Engineering, Geological

Quantitative assessment of the influence of surface roughness on soil stiffness

M. Otsubo et al.

GEOTECHNIQUE (2015)

Add to Collection

Article Multidisciplinary Sciences

Adhesive contact of the Weierstrass profile

L. Afferrante et al.

PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2015)

Add to Collection

Article Engineering, Chemical

On the Fractal Dimension of Rough Surfaces

B. N. J. Persson

TRIBOLOGY LETTERS (2014)

Add to Collection

Article Engineering, Geological

Effects of surface structure deformation on static friction at fractal interfaces

D. A. H. Hanaor et al.

GEOTECHNIQUE LETTERS (2013)

Add to Collection

Article Engineering, Mechanical

Asperity micro-contact models as applied to the deformation of rough line contact

Ali Beheshti et al.

TRIBOLOGY INTERNATIONAL (2012)

Add to Collection

Article Engineering, Geological

The influence of particle characteristics on the behaviour of coarse grained soils

I. Cavarretta et al.

GEOTECHNIQUE (2010)

Add to Collection

Article Engineering, Chemical

Computer simulation of the effect of contact stiffness and adhesion on the fluidization behaviour of powders

R. Moreno-Atanasio et al.

CHEMICAL ENGINEERING SCIENCE (2007)

Add to Collection

Article Nanoscience & Nanotechnology

A tribological study of double-walled and triple-walled carbon nanotube oscillators

CC Ma et al.

NANOTECHNOLOGY (2005)

Add to Collection

Article Engineering, Mechanical

The application of contact mechanics to rail profile design and rail grinding

EE Magel et al.

WEAR (2002)

Add to Collection

Article Chemistry, Physical

The effect of surface roughness on the adhesion of elastic solids

BNJ Persson et al.

JOURNAL OF CHEMICAL PHYSICS (2001)

Add to Collection

Article Chemistry, Physical

Theory of rubber friction and contact mechanics

BNJ Persson

JOURNAL OF CHEMICAL PHYSICS (2001)

Add to Collection

Article Electrochemistry

Electrochemical methods in tribocorrosion: a critical appraisal

D Landolt et al.

ELECTROCHIMICA ACTA (2001)

Add to Collection

Article Engineering, Geological

Micromechanics-based stress-strain behaviour of soils at small strains

S Yimsiri et al.

GEOTECHNIQUE (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.