Related references
Note: Only part of the references are listed.Coupled thermo-hydro-mechanical-phase field modeling for fire-induced in concrete
Panpan Cheng et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2022)
Crack phase-field model equipped with plastic driving force and degrading fracture toughness for ductile fracture simulation
Jike Han et al.
COMPUTATIONAL MECHANICS (2022)
Phase field fracture in elasto-plastic solids: Incorporating phenomenological failure criteria for ductile materials
Cunyi Li et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2022)
Phase-field modeling of fracture in strain-hardening elastomers: Variational formulation, multiaxial experiments and validation
Shreeraman Swamynathan et al.
ENGINEERING FRACTURE MECHANICS (2022)
A unified finite strain gradient-enhanced micropolar continuum approach for modeling quasi-brittle failure of cohesive-frictional materials
Matthias Neuner et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2022)
Phase field modeling of ductile fracture at large plastic strains using adaptive isotropic remeshing
Hazem Eldahshan et al.
COMPUTATIONAL MECHANICS (2021)
Integration of an adaptive cohesive zone and continuum ductile fracture model to simulate crack propagation in steel structures
Vincente Pericoli et al.
ENGINEERING FRACTURE MECHANICS (2021)
A stress-weighted ductile fracture model for steel subjected to Ultra Low Cycle Fatigue
Christopher Smith et al.
ENGINEERING STRUCTURES (2021)
A variational phase-field model For ductile fracture with coalescence dissipation
Tianchen Hu et al.
COMPUTATIONAL MECHANICS (2021)
A framework to model the fatigue behavior of brittle materials based on a variational phase-field approach
P. Carrara et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)
A ductile phase -field model based on degrading the fracture toughness: Theory and implementation at small strain
Bo Yin et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)
A phase-field model of fracture with frictionless contact and random fracture properties: Application to thin-film fracture and soil desiccation
Tianchen Hu et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)
A phase field model for cohesive fracture in micropolar continua
Hyoung Suk Suh et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)
A 3D gradient-enhanced micropolar damage-plasticity approach for modeling quasi-brittle failure of cohesive-frictional materials
M. Neuner et al.
COMPUTERS & STRUCTURES (2020)
MOOSE: Enabling massively parallel multiphysics simulation
Cody J. Permann et al.
SOFTWAREX (2020)
A phase-field crack model based on directional stress decomposition
Christian Steinke et al.
COMPUTATIONAL MECHANICS (2019)
A phase-field formulation for dynamic cohesive fracture
Rudy J. M. Geelen et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)
A unified phase field damage model for modeling the brittle-ductile dynamic failure mode transition in metals
Dongyang Chu et al.
ENGINEERING FRACTURE MECHANICS (2019)
Development of a phase field method for modeling brittle and ductile fracture
Chuanshi Huang et al.
COMPUTATIONAL MATERIALS SCIENCE (2019)
Phase field modeling of brittle compressive-shear fractures in rock-like materials: A new driving force and a hybrid formulation
Shuwei Zhou et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)
Coupled phase-field and plasticity modeling of geological materials: From brittle fracture to ductile flow
Jinhyun Choo et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2018)
Progressive damage and rupture in polymers
Brandon Talamini et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2018)
Variational phase-field formulation of non-linear ductile fracture
M. Dittmann et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2018)
A modified Gurson-type plasticity model at finite strains: formulation, numerical analysis and phase-field coupling
Fadi Aldakheel et al.
COMPUTATIONAL MECHANICS (2018)
A convergence study of phase-field models for brittle fracture
Thomas Linse et al.
ENGINEERING FRACTURE MECHANICS (2017)
Phase-field modeling of ductile fracture at finite strains: A robust variational-based numerical implementation of a gradient-extended theory by micromorphic regularization
Christian Miehe et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2017)
A unified phase-field theory for the mechanics of damage and quasi-brittle failure
Jian-Ying Wu
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2017)
Phase field modeling of brittle fracture for enhanced assumed strain shells at large deformations: formulation and finite element implementation
J. Reinoso et al.
COMPUTATIONAL MECHANICS (2017)
A phase-field model for ductile fracture at finite strains and its experimental verification
Marreddy Ambati et al.
COMPUTATIONAL MECHANICS (2016)
A phase-field formulation for fracture in ductile materials: Finite defonnation balance law derivation, plastic degradation, and stress triaxiality effects
Michael J. Borden et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2016)
A variational framework to model diffusion induced large plastic deformation and phase field fracture during initial two-phase lithiation of silicon electrodes
Xiaoxuan Zhang et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2016)
Phase-field description of brittle fracture in plates and shells
Josef Kiendl et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2016)
Phase-field modelling of ductile fracture: a variational gradient-extended plasticity-damage theory and its micromorphic regularization
C. Miehe et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2016)
Phase-field modeling of ductile fracture
M. Ambati et al.
COMPUTATIONAL MECHANICS (2015)
Phase field modeling of fracture in multi-physics problems. Part II. Coupled brittle-to-ductile failure criteria and crack propagation in thermo-elastic-plastic solids
C. Miehe et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2015)
Phase field approximation of dynamic brittle fracture
Alexander Schlueter et al.
COMPUTATIONAL MECHANICS (2014)
A higher-order phase-field model for brittle fracture: Formulation and analysis within the isogeometric analysis framework
Michael J. Borden et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2014)
Phase field modeling of fracture in rubbery polymers. Part I: Finite elasticity coupled with brittle failure
Christian Miehe et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2014)
A strong discontinuity approach on multiple levels to model solids at failure
Christian Linder et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2013)
A marching cubes based failure surface propagation concept for three-dimensional finite elements with non-planar embedded strong discontinuities of higher-order kinematics
Christian Linder et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2013)
A phase-field description of dynamic brittle fracture
Michael J. Borden et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2012)
Three-dimensional finite elements with embedded strong discontinuities to model material failure in the infinitesimal range
F. Armero et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2012)
Blossom-Quad: A non-uniform quadrilateral mesh generator using a minimum-cost perfect-matching algorithm
J. -F. Remacle et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2012)
A time-discrete model for dynamic fracture based on crack regularization
Blaise Bourdin et al.
INTERNATIONAL JOURNAL OF FRACTURE (2011)
Ductile fracture: Experiments and computations
H. Li et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2011)
A phase field model for rate-independent crack propagation: Robust algorithmic implementation based on operator splits
Christian Miehe et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2010)
Thermodynamically consistent phase-field models of fracture: Variational principles and multi-field FE implementations
C. Miehe et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2010)
Regularized formulation of the variational brittle fracture with unilateral contact: Numerical experiments
Hanen Amor et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2009)
New finite elements with embedded strong discontinuities in the finite deformation range
F. Armero et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2008)
The variational approach to fracture
Blaise Bourdin et al.
JOURNAL OF ELASTICITY (2008)
Finite elements with embedded strong discontinuities for the modeling of failure in solids
C. Linder et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2007)
Flexible complementarity solvers for large-scale applications
SJ Benson et al.
OPTIMIZATION METHODS & SOFTWARE (2006)
On fracture locus in the equivalent strain and stress triaxiality space
YB Bao et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2004)
Micromechanical concept for the analysis of damage evolution in thermo-viscoelastic and quasi-brittle materials
H Stumpf et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2003)
Effect of stress triaxiality corrected plastic flow on ductile damage evolution in the framework of continuum damage mechanics
G La Rosa et al.
ENGINEERING FRACTURE MECHANICS (2001)
Numerical experiments in revisited brittle fracture
B Bourdin et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2000)