Related references
Note: Only part of the references are listed.Understanding the critical role of boundary conditions in meso-scale finite element simulation of braided composites
Zhenqiang Zhao et al.
ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)
Anisotropic compression behaviors of bio-inspired modified body-centered cubic lattices validated by additive manufacturing
Peng Wang et al.
COMPOSITES PART B-ENGINEERING (2022)
Designing and tailoring effective elastic modulus and negative Poisson's ratio with continuous carbon fibres using 3D printing
Yuan Chen et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)
Tailoring 3D printed graded architected polymer foams for enhanced energy absorption
Huan Jiang et al.
COMPOSITES PART B-ENGINEERING (2021)
Continuum modeling of crushing of low density foams
Chenglin Yang et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2020)
Micro and meso-scale modelling of the response of transversely isotropic foam to impact - a structural cell-assembly approach
Pei Li et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2020)
Effect of defects on the dynamic compressive behavior of cellular solids
Sri Datta Rapaka et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
High fidelity simulation of the mechanical behavior of closed-cell polyurethane foams
M. Marvi-Mashhadi et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2020)
Experimental and analytical investigation of the bending behaviour of 3D-printed bio-based sandwich structures composites with auxetic core under cyclic fatigue tests
Khawla Essassi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
Geometrical and topological evolution of a closed-cell aluminium foam subject to drop-weight impact: An X-ray tomography study
M. A. Kader et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2020)
Compression experiment and numerical evaluation on mechanical responses of the lattice structures with stochastic geometric defects originated from additive-manufacturing
Xiaofei Cao et al.
COMPOSITES PART B-ENGINEERING (2020)
Characterization of initial and subsequent yield behaviors of closed-cell aluminum foams under multiaxial loadings
Erdong Wang et al.
COMPOSITES PART B-ENGINEERING (2020)
Effects of cell size vs. cell-wall thickness gradients on compressive behavior of additively manufactured foams
Yu Duan et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
On axial splitting and curling behaviour of circular sandwich metal tubes with metal foam core
Jianxun Zhang et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)
A rate-sensitive constitutive model for anisotropic cellular materials - Application to a transversely isotropic polyurethane foam
Pei Li et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)
Large deformation and energy absorption of additively manufactured auxetic materials and structures: A review
Jianjun Zhang et al.
COMPOSITES PART B-ENGINEERING (2020)
Quasi-static and dynamic compressive properties and deformation mechanisms of 3D printed polymeric cellular structures with Kelvin cells
Duan Yu et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2019)
The role of defects in dictating the strength of brittle honeycombs made by rapid prototyping
P. E. Seiler et al.
ACTA MATERIALIA (2019)
Creep failure of honeycombs made by rapid prototyping
P. E. Seiler et al.
ACTA MATERIALIA (2019)
Experimental and Numerical Studies on Defect Characteristics During Milling of Aluminum Honeycomb Core
Qinglong An et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2019)
Smooth-shell metamaterials of cubic symmetry: Anisotropic elasticity, yield strength and specific energy absorption
Colin Bonatti et al.
ACTA MATERIALIA (2019)
Modeling and computing parameters of three-dimensional Voronoi models in nonlinear finite element simulation of closed-cell metallic foams
Xiaoyang Zhang et al.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2018)
In-Plane Stiffness of Additively Manufactured Hierarchical Honeycomb Metamaterials With Defects
Kazi Moshiur Rahman et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
Effects of honeycomb geometry on stress concentration due to defects
D. H. Chen et al.
COMPOSITE STRUCTURES (2018)
On the influence of structural defects for honeycomb structure
Zhonggang Wang et al.
COMPOSITES PART B-ENGINEERING (2018)
On the crushing of polydisperse foams
Stavros Gaitanaros et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2018)
Compressive behavior and failure mechanisms of freestanding and composite 3D graphitic foams
Kenichi Nakanishi et al.
ACTA MATERIALIA (2018)
A predictive micropolar continuum model for a novel three-dimensional chiral lattice with size effect and tension-twist coupling behavior
Shengyu Duan et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2018)
Crushing and densification of rapid prototyping polylactide foam: Meso-structural effect and a statistical constitutive model
Wang Shilong et al.
MECHANICS OF MATERIALS (2018)
An experimental study on the impact behavior of multilayer sandwich with corrugated cores
B. T. Cao et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2017)
Macro and micro collapse mechanisms of closed-cell aluminium foams during quasi-static compression
M. A. Kader et al.
MATERIALS & DESIGN (2017)
The tensile tensile ductility of cellular Solids: The role of imperfections
William Ronan et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2016)
Investigation of microstructural and mechanical properties of cell walls of closed-cell aluminium alloy foams
M. A. Islam et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effects of Meso Shape Irregularity of Metal Foam on Yield Features under Triaxial Loading
Xiaoyang Zhang et al.
INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS (2015)
Effects of statistics of cell's size and shape irregularity on mechanical properties of 2D and 3D Voronoi foams
Liqun Tang et al.
ACTA MECHANICA (2014)
Dynamic stress-strain states for metal foams using a 3D cellular model
Zhijun Zheng et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2014)
Study on aluminum honeycomb sandwich panels with random skin/core weld defects
Shigang Ai et al.
JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2013)
Analysis of defects on the compressive behaviors of open-cell metal foams through models using the FEM
Zi-Xing Lu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Ultralight Metallic Microlattices
T. A. Schaedler et al.
SCIENCE (2011)
Effects of defects on the in-plane dynamic crushing of metal honeycombs
Xin-Chun Zhang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2010)
Effect of defects on elastic-plastic behavior of cellular materials
A. Ajdari et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Shock enhancement of cellular structures under impact loading: Part II analysis
S. Pattofatto et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2007)
The effect of structural defects on the compressive behavior of closed-cell Al foam
I Jeon et al.
ACTA MATERIALIA (2005)
High rate crushing of wood along the grain
JJ Harrigan et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2005)
Compressive response of open-cell foams. Part I: Morphology and elastic properties
L Gong et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2005)
Compressive response of open cell foams - Part II: Initiation and evolution of crushing
L Gong et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2005)
Strain rate sensitivity and defects in steel foam
C Park et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
Effects of cell irregularity on the elastic properties of 2D Voronoi honeycombs
HX Zhu et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2001)
Size effects in ductile cellular solids. Part II: experimental results
EW Andrews et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2001)
Influence of cell wall thickness variations on elastic stiffness of closed-cell cellular solids
JL Grenestedt et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2000)
Isotropic constitutive models for metallic foams
VS Deshpande et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2000)